High rate nitrogen removal by the CANON process at ambient temperature

Completely autotrophic nitrogen removal over nitrite (CANON) is a cost-effective nitrogen removal process. Implementation of the CANON process relies on the cooperation of ammonium-oxidizing and Anammox bacteria, as well as the inhibition of nitrite-oxidizing bacteria. Strict limitations on dissolved oxygen (DO) concentration in the reactor, and the addition of sufficient inorganic carbon in the influent, were adopted as the main operational strategies. The reactor was fed with synthetic inorganic wastewater composed mainly of NH(4)(+)-N, and operated for 106 days. Stable nitrogen removal rates (NRR) of around 1.4 kg N m(-3) d(-1) were obtained at ambient temperature. Morphological characteristics and analysis of bacterial community confirmed the formation of functional outer aerobic and inner anaerobic granular sludge, providing evidence of stable nitrogen removal.     

Treatment of domestic sewage by a metal membrane bioreactor

A submerged flat metal MBR (membrane bioreactor) was used to treat synthetic domestic sewage in this study. The experiment was continued for 270 days and ran under two modes as AMBR (aerobic membrane bioreactor) and A/O-MBR (anoxic/aerobic membrane bioreactor) at a permeate flux of 0.4-1 m3/(m2 d). PVA (polyvinyl alcohol) gel beads were added to the aeration tank with a volume ratio of 10% at the end of the A/O-MBR mode. The mean COD and TN removal efficiencies achieved 96.69 and 32.12% under the AMBR mode, and those were 92.17 and 72.44% under the A/O-MBR mode, respectively. SND (simultaneous nitrification and denitrification) occurred at high MLSS (mixed liquor suspended solids) concentration. The metal membranes reduced effluent COD during filtration. The system ran stably for 115 days at a permeate flux of 0.8-1 m3/(m2 d) without changing membranes under the AMBR mode, but the membrane filterability decreased gradually under high MLSS or A/O-MBR mode, and the addition of PVA worsened the membrane filterability on the contrary. PSD (particle size distribution) and sludge fractions had evident influence on membrane fouling. The main fouling mechanism was cake formation under the AMBR mode, and that was pore blocking under the A/O-MBR mode.     

Size Distribution of Gold Nanoparticles Used by Small Angle X-ray Scattering

The size distribution of gold nanoparticles was estimated based on the scattering intensity data obtained from small angle X-ray scattering (SAXS) and compared with the result of micrographs by transmission electron microscopy. The slope of the Guinier plot was used to estimate the mean size assuming a narrow particle size distribution. When the size distribution is narrow, the mean size can be easily obtained from slope of a Guinier plot of scattering data within 10% error. Additionally, assuming a lognormal size distribution, the size distribution and the mean size can be calculated using the experimental SAXS data in the fitting analysis. The histogram method, which utilizes the coefficient matrix of scattering intensity, was also applied to the estimation of the size distribution, and this method could be useful for a rough estimate of the size distribution.     

Multistage bayesian autonomy for high‐precision operation in a large field

This paper presents a generalized multistage bayesian framework to enable an autonomous robot to complete high‐precision operations on a static target in a large field. The proposed framework consists of two multistage approaches, capable of dealing with the complexity of high‐precision operation in a large field to detect and localize the target. In the multistage localization, locations of the robot and the target are estimated sequentially when the target is far away from the robot, whereas these locations are estimated simultaneously when the target is close. A level of confidence (LOC) for each detection criterion of a sensor and the associated probability of detection (POD) of the sensor are defined to make the target detectable with different LOCs at varying distances. Differential entropies of the robot and target are used as a precision metric for evaluating the performance of the proposed approach. The proposed multistage observation and localization approaches were applied to scenarios using an unmanned ground vehicle (UGV) and an unmanned aerial vehicle (UAV). Results with the UGV in simulated environments and then real environments show the effectiveness of the proposed approaches to real‐world problems. A successful demonstration using the UAV is also presented.     

Selection of injection conditions for aluminum particles as a raw material by numerical analysis in the synthesis of ultrafine particles with transferred type arc plasma

We investigated by numerical analysis the dependence of vaporization behavior of aluminum particles injected into transferred type arc plasma on injection conditions in synthesis of aluminum nitride ultra fine particles. On the basis of calculation results, we chose one proper injection condition where aluminum particles vaporized more. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(2): 46–52, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20852     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Self‐Expansion Behavior of Silk Fibroin Film

Summary: Silk fibroin cast film was prepared using a ternary solvent system of CaCl₂/CH₃CH₂OH/H₂O (1/2/8 in mole ratio). A drying temperature at casting influenced crystal structure of fibroin. When a drying temperature was set lower than 9 °C, the cast film became amorphous. When a drying temperature was set higher than 40 °C, a fibroin film of silk‐II structure was obtained. In order to produce a fibroin film of silk‐I structure, a preferable temperature range was from 20 to 26 °C. The crystal transformation from random coil structure into silk‐I could be made through exposure of an amorphous film to water vapor. As for the crystal transformation from silk‐I into silk‐II, the treatment with a glycerin solution was effective. In the course of the treatment a film showed self‐thinning and self‐expanding. The expansion ratio exceeded 40% at maximum. The film produced accompanying self‐expansion was ductile in nature.

The apparent self‐expansion percentage as a function of initial thickness of the film. The ductility of the film was classified into four stages from the observation of recovery behavior after folding: ?, very soft; ?, soft; ?, middle; ?, hard (see Figure 5 ).     

Supplementation of the diet of dairy cows with trehalose results in milk with low lipid peroxide and high antioxidant content

The objective of this study was to investigate the effect of dietary supplementation with the disaccharides trehalose and cellobiose on antioxidant activity in rumen fluid, blood, and milk of dairy cows. Nine Holstein dairy cows housed in a free-stall barn were divided into 3 groups, with each group receiving a different dietary treatment (a control diet, a 1% trehalose-supplemented diet, or a 1% cellobiose-supplemented diet) following a 3 × 3 Latin square design. Feed intake and milk production increased in cows receiving the trehalose-supplemented diet compared with those receiving the control and cellobiose-supplemented diets. The total protozoa numbers in the rumen fluid of cows fed trehalose- or cellobiose-supplemented diets were greater than those of the control group. The C18:0 and C18:1 fatty acid content was increased in the milk of cows fed the trehalose-supplemented diet compared with that of the control group, and the C18:3n-3 fatty acid content in the milk of cows fed the cellobiose-supplemented diet was less than that of the control group. Plasma biochemical parameters were unchanged among the different treatments. In rumen fluid, 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity and superoxide dismutase activity were increased 2 h after feeding in cows receiving the cellobiose-supplemented diet compared with the control group, and the concentration of thiobarbituric acid reactive substances in the rumen fluid of cows fed the cellobiose-supplemented diet was decreased. In contrast, the values of these parameters measured in the milk of cows fed the cellobiose-supplemented diet were no different from those of control cows. Dietary supplementation with trehalose did, however, bring about an improvement of the oxidative status of milk and blood in these animals compared with controls. These results provide the first evidence supporting the use of dietary disaccharides to decrease lipid peroxide levels and increase the antioxidant content of dairy cow milk. The findings suggest that disaccharides, particularly trehalose, might be useful as supplements for reducing oxidative stress and improving the quality of milk for human consumption, as well as possibly impairing the processes that give rise to lipid oxidation odor in dairy cow milk.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.