Mn/Ti-Zr复合氧化物催化苯甲酸甲酯选择性加氢

以硝酸锆和钛酸四丁酯为原料,采用共沉淀法制备Ti-Zr-O氧化物载体,采用浸渍法制备了Mn/Ti-Zr催化剂;采用XRD、N2物理吸附、H2-TPR、NH3-TPD和TG-DTA对Mn/Ti-Zr催化剂进行了表征,并考察了催化剂组成、结构和反应条件对苯甲酸甲酯（MB）加氢性能的影响,以及催化剂的长周期稳定性、失活和再生行为。结果表明：TiO2含量和Mn负载量分别为12% 和8% （二者均以Ti-Zr-O氧化物的质量为基准,下同）时制备的Mn/Ti-Zr催化剂性能最优,该催化剂在θ = 390 ℃, p = 1.0 MPa,n(H2)∶n(MB) = 9∶1和重时空速（WHSV）= 0.5 h-1的优化条件能够实现98.0% 的苯甲酸甲酯转化率和89.7%的苯甲醛和苯甲醇选择性;苯甲酸甲酯加氢反应的活性和选择性分别与Mn/Ti-Zr表面MnOx物种的氧化还原性和催化剂的酸性密切相关。此外,Mn/Ti-Zr催化剂具有良好的结构稳定性,在反应1000 h后仅因积碳而丧失11% 的活性,且轻微失活的催化剂可以通过焙烧恢复其初始活性和选择性。     

喷气燃料微生物ATP荧光检测酶反应体系研究

荧光素酶反应体系是利用ATP生物荧光法检测喷气燃料微生物污染的关键.为了获得最佳的酶反应体系,本研究以ATP标准物质为研究对象,考察了荧光素酶、荧光素和Mg2+的最佳使用量.结果表明:荧光素酶、荧光素和Mg2+的最佳使用量依次为0.05 mg·mL-1、0.08 mg·mL-1和5 mmol·L-1.通过考察Mg2+与ATP相互作用对荧光反应的影响发现,ATP在与荧光素酶之前预先与Mg2+结合,可以提高荧光反应的效率,使相对发光强度有所增加.相比于传统的培养法和HY-LITE JET A1燃料试验,优化的荧光素酶-荧光素反应体系提高了检测效率、大幅度降低了检测成本.     

20CrMnTi连铸瞬态与平均冷速条件下凝固原位观察

 宽淬透性带和大尺寸TiN析出物严重危害20CrMnTi齿轮钢的产品质量,其控制的关键基础是掌握连铸过程中凝固组织演变行为机理。传统高温激光共聚焦扫描显微镜(HT-CSLM)原位观察研究通常将糊状区冷却速率设定为固定值,这不能有效反映连铸凝固过程中冷却速率的变化。为此,以国内某钢厂20CrMnTi 160 mm×160 mm小方坯为研究对象,首先通过二维切片凝固传热计算,确定内弧表面下方20、40、60 mm位置处糊状区的热历程、瞬态与平均冷却速率,进而设计HT-CSLM试验升温与降温方案。然后,开展这些位置处糊状区瞬态与平均冷却速率条件下HT-CSLM试验,研究揭示不同冷却条件下20CrMnTi的凝固过程、δ晶粒生长动力学和包晶相变机制。最后,通过电子探针分析(EPMA),考察冷却条件对凝固组织尺寸的影响规律。结果表明,由于凝固潜热的补偿,内弧皮下20、40、60 mm位置处初始凝固阶段冷却速率较小,凝固中后期逐渐增大,且越深入方坯内部越显著。这些位置处的平均冷却速率分别为102.81、44.63和34.93 ℃/min。δ晶粒率先从钢液中析出,其平均生长速率随着冷却速率的提升而增大。在瞬态冷却速率条件下,随着凝固的进行,瞬时生长速率呈增大的趋势,但是在平均冷却速率条件下瞬时生长速率则略微降低。这是因为在瞬态冷却速率条件下,糊状区冷却速率由慢至快,不断补偿了凝固潜热,同时初始形核数量少,生长空间大,溶质过冷度的影响相对较弱。当熔体温度降低至包晶相变临界温度时,δ晶粒快速转变为γ晶粒,即发生块状转变,导致固相率迅速增加,且伴随有部分γ晶粒快速聚合。整体上讲,包晶相变临界温度随着冷却速率的增大而降低,但是也受溶质初始含量的影响。此后,剩余液相向γ相转变,直至完全凝固。晶粒半径随着冷却速率的提升而减小,且在平均冷却速率条件下比瞬态冷却速率条件更小,这取决于初始凝固阶段的形核数量。     

Ce对共晶Mg-Al合金组织的影响

模拟AZ9l镁合金半固态液相凝固后期的成分，分析了共晶成分镁铝合金添加不同含量的稀土元素Ce后，铸态显微结构的变化。结果表明：Ce的加入改变了合金的组织，增加了初晶α相的含量，细化了β相并减少了β相的含量。随着稀土Ce加入量的增加，在Ce的加入量为0．6％时，所得的组织最好；在Ce含量大于0．6％时，随着Ce加入量的增加，细化效果反而变差。     

稀土变质处理对低合金铸钢组织和性能的影响

变质处理对耐磨铸钢组织和性能有重要的影响,选择合理的变质处理工艺是提高低碳铸钢耐磨性能的重要手段。用稀土硅铁合金对低合金耐磨铸钢进行变质处理,研究了变质剂加入量对铸钢的硬度和冲击韧性的影响。结果表明：当1#稀土硅铁合金加入量为0.25%时,低合金钢的晶粒细化;在控制冷却的条件下,能稳定地得到上贝氏体＋下贝氏体＋马氏体的复合组织。适量稀土硅铁的加入可以有效地改善低合金铸钢的微观组织、提高低合金耐磨铸钢的力学性能,但稀土加入量不足或过量会使铸钢的性能降低。     

Quantum DCS系统及其应用体会

中国联合水泥公司3000t／d熟料生产线电气控制系统采用了法国施耐德公司的Quantum DCS系统，实现对全厂所有设备的工艺操作和控制。全面介绍了QuantumDCS系统的特点、功能系统构成网络，并详细总结了确保该系统稳定可靠运行的使用和维护的经验。     

朗盛:助力涂料行业客户提升竞争力——朗盛携高品质颜料和杀菌剂亮相2007中国国际涂料展

朗盛,作为全球领先的特殊化学品企业,每年以不同的形象亮相于中国国际涂料展。2007年,朗盛以一系列用于涂料行业的高品质颜料和杀菌剂亮相,以期助力中国涂料行业客户提升竞争力。期间,本刊特对朗盛无机颜料业务部亚太区负责人韩乐福博士及材料保护品大中华区负责人顾其峰就朗盛产品及市场方面进行了专访。     

A Simple D 2-Sampling Based PTAS for k-Means and Other Clustering Problems

Given a set of points \(P \subset\mathbb{R}^{d}\) , the k-means clustering problem is to find a set of k centers \(C = \{ c_{1},\ldots,c_{k}\}, c_{i} \in\mathbb{R}^{d}\) , such that the objective function ∑ _x∈P e(x,C)², where e(x,C) denotes the Euclidean distance between x and the closest center in C, is minimized. This is one of the most prominent objective functions that has been studied with respect to clustering. D ²-sampling (Arthur and Vassilvitskii, Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) is a simple non-uniform sampling technique for choosing points from a set of points. It works as follows: given a set of points \(P \subset\mathbb{R}^{d}\) , the first point is chosen uniformly at random from P. Subsequently, a point from P is chosen as the next sample with probability proportional to the square of the distance of this point to the nearest previously sampled point. D ²-sampling has been shown to have nice properties with respect to the k-means clustering problem. Arthur and Vassilvitskii (Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) show that k points chosen as centers from P using D ²-sampling give an O(logk) approximation in expectation. Ailon et al. (NIPS, pp. 10–18, 2009) and Aggarwal et al. (Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques, pp. 15–28, Springer, Berlin, 2009) extended results of Arthur and Vassilvitskii (Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) to show that O(k) points chosen as centers using D ²-sampling give an O(1) approximation to the k-means objective function with high probability. In this paper, we further demonstrate the power of D ²-sampling by giving a simple randomized (1+?)-approximation algorithm that uses the D ²-sampling in its core.     

FAIRIO: A Throughput-oriented Algorithm for Differentiated I/O Performance

Providing differentiated service in a consolidated storage environment is a challenging task. To address this problem, we introduce FAIRIO, a cycle-based I/O scheduling algorithm that provides differentiated service to workloads concurrently accessing a consolidated RAID storage system. FAIRIO enforces proportional sharing of I/O service through fair scheduling of disk time. During each cycle of the algorithm, I/O requests are scheduled according to workload weights and disk-time utilization history. Experiments, which were driven by the I/O request streams of real and synthetic I/O benchmarks and run on a modified version of DiskSim, provide evidence of FAIRIO’s effectiveness and demonstrate that fair scheduling of disk time is key to achieving differentiated service in a RAID storage system. In particular, the experimental results show that, for a broad range of workload request types, sizes, and access characteristics, the algorithm provides differentiated storage throughput that is within 10% of being perfectly proportional to workload weights; and, it achieves this with little or no degradation of aggregate throughput. The core design concepts of FAIRIO, including service-time allocation and history-driven compensation, potentially can be used to design I/O scheduling algorithms that provide workloads with differentiated service in storage systems comprised of RAIDs, multiple RAIDs, SANs, and hypervisors for Clouds.     

P450酶启发的染料后修饰铁卟啉MOF光催化氧化

受细胞色素P450酶氧化代谢的启发,将染料酸性红87（Acid Red 87）后修饰到金属有机框架PCN-222(Fe)中,构筑非均相拟酶光催化剂Acid Red 87@PCN-222(Fe),拉近染料与铁卟啉中心的距离,利用光致电子转移模拟P450的电子传递链。以1-(4-甲氧基苯基)乙醇为模板底物,对光催化氧化的条件如溶剂、电子牺牲剂、氧源等进行筛选,得到优化反应条件为高碘酸钠(53.5 mg, 0.25 mmol),2,6-二甲基吡啶三氟甲磺酸盐(64.3 mg, 0.25 mmol),Acid Red 87@PCN-222(Fe)(12.0 mg, 0.00625 mmol),乙腈(2 mL),530 nm波长LED光照反应24 h。催化剂重复使用3次后仍保持活性和晶态结构。该催化体系对苄基碳氢键氧化具有良好的底物适用范围,可应用于非甾体类抗炎药匹美诺芬的区位选择性氧化，产率为48%，该体系还可将芳基硫醚类化合物氧化至相应的亚砜，体现其在精细化工制药、工业脱硫领域的应用潜质。