卟啉类光电功能材料的研究进展

卟啉及其衍生物是一类具有优良的光电性能的有机半导体材料．引起人们广泛的关注。本文对卟啉类光电材料在模拟生物光合作用中心的光致电荷转移和能量转移，有机太阳能电池．分子光电器件。有机电致发光和光存储等领域的研究进展做一简要介绍。     

Effects of surface roughness of substrates on the c-axis preferred orientation of ZnO films deposited by r.f. magnetron sputtering

The c-axis preferred orientation of ZnO film is the most important factor for its successful application in piezoelectric devices. The effects of surface roughness of the substrate on the c-axis preferred orientation of ZnO thin films, deposited by radio frequency magnetron sputtering, were investigated. During sputtering, the oxygen content in the argon environment used was varied from 0 to 70% at a total sputtering pressure of 10 mTorr. Very smooth Si, smooth evaporated Au/Si, smooth evaporated-Al/Si, and rough sputtered-Al/Si were used as substrates. Their r.m.s. roughnesses, as measured by atomic force microscopy, were 1.27, 17.1, 21.1 and 65-118 Å, respectively. The crystalline structure and the angular spread of the (0 0* 2) plane normal to the ZnO films were determined using X-ray diffraction and X-ray rocking curves, respectively. The crystallinity and the preferred c-axis orientation of the ZnO films were strongly dependent on the surface roughness of the substrates rather than on the oxygen content of the working environment or on the chemical nature of the substrate.     

Simultaneous amplification by Er ions and SRS in an Er-doped germano-silica fiber

A flat signal gain over in the entire C- and L-bands by erbium (Er) ions' radiative transition and stimulated Raman scattering in an Er-doped germano-silica fiber can be obtained if proper values of the concentration of Er and background loss in a fiber core are obtained during the fiber fabrication process. The optimized conditions for the flat C- and L-band gain are analyzed as functions of Er concentrations. Even for a low-gain value provided by a germano-silica core fiber with a low Er concentration and an optimum fiber length, a relatively low pump is required to obtain the flat gain band.     

Inhibition effect of carbon dioxide on the oxidation of hydrogen over a platinum foil catalyst

This paper investigates the catalytic ignition of the H₂/O₂/CO₂ mixture on platinum in a stagnation flow at atmospheric pressure experimentally and numerically. We measure the ignition temperatures of the gas mixtures flowing towards resistively heated platinum with various composition ratios and various diluent gases of N₂, Ar and CO₂. Compared with N₂ or Ar, the CO₂ dilution shows higher ignition temperature by about 50 K, even at the same composition ratio. The ignition temperature increase is proportional to the dilution ratio. Through the numerical simulation, it is illustrated that higher ignition temperature is caused by the adsorption of CO₂ and following dissociation on platinum surface, which was to date considered negligible in catalytic combustion.     

Estimation of the Longitudinal Dispersion Coefficient Using the Velocity Profile in Natural Streams

In this study, a theoretical method for predicting the longitudinal dispersion coefficient is developed based on the transverse velocity distribution in natural streams. Equations of the transverse velocity profile for irregular cross sections of the natural streams are analyzed. Among the velocity profile equations tested in this study, the beta distribution equation, which is a probability density function, is considered to be the most appropriate model for explaining the complex behavior of the transverse velocity structure of irregular natural streams. The new equation for the longitudinal dispersion coefficient that is based on the beta function for the transverse velocity profile is developed. A comparison of the proposed equation with existing equations and the observed longitudinal dispersion coefficient reveals that the proposed equation shows better agreement with the observed data compared to other existing equations.     

智能光网络控制平面技术

光网络的智能化是下一代光网络发展的主要趋势,在对智能光网络发展背景进行分析的基础上,对光网络控制平面技术进行了讨论,重点分析了光网络控制平面的功能模型、主要功能、应用协议和控制平面的可靠性等问题。     

金属/Al2O3基纳米复合材料研究最新进展

金属／Al2O3纳米复合材料在保持原有金属的功能特性时，还可以获得 很好的力学性能，是有良好发展前景的一种纳米复合材料。本文回顾了近年来金属／Al2O3基纳米复合材料在制备工艺，微观结构和力学性能，增韧强化机理方面的最新进展，并指出了今后的研究方向。     

浅谈灭火器配置、管理和使用中存在的问题及整改措施

本文对落实《建筑灭火器配置设计规范》过程中存在的诸如灭火器配置的设计、选择 ,灭火器的维护检查以及使用等方面的问题作一探讨 ,并就这些问题提出相应的解决方法。     

高速光通信系统中的色散问题及其补偿研究

当光纤通信系统单信道速度升级到40Gbit/s及以上时，色度色散（CD）和偏振模色散（PMD）已经成为严重影响系统性能的主要因素。本文主要从补偿的必要性、关键技术、主要方法和解决方案等方面分别对CD和PMD及其补偿进行了较详细的研究。     

Recording of volume hologram using a beam pattern from taperedoptical fiber

A photorefractive volume hologram was recorded and probed using light diffracted from a tapered optical fiber as a reference beam. A single-mode fiber (SMF) was chemically etched and tapered to give a complicated beam pattern, and it is shown that the tapered optical fiber can be utilized to increase the storage density of the volume hologram. Spatial selectivity of the volume hologram with this method was increased by two times compared to the normal SMF referencing, which is due to the fact that the complicated beam pattern has little correlation with its shifted version