Model development for multicomponent mass transfer with rapid chemical reactions in a small drop

Multicomponent mass transfer accompanied by instantaneous chemical reactions in a small drop has been modeled and simulated for the case where two different solutes diffuse from a continuous phase into the drop and react rapidly with a third reactant in the drop. The computational results obtained by Galerkin’s finite element method are reported in terms of concentration profiles, the locations of reaction front, the cumulative mass flux, and the enhancement factor. The effects of physical parameters, such as diffusivities of the solutes and the reactant, the interfacial concentration of solutes, and the relative amount of the reactant, on the calculated quantities are discussed.     

核测井仪器中的磁屏蔽研究

核测井仪器受套管剩磁的影响比较严重，常常用在探测器的周围缠绕多层坡莫合金带的方法进行磁屏蔽，由于缠绕的坡莫合金圆筒不能闭合，加上缠绕过程中坡莫合金带的形变造成材料本身磁导率的下降，传统的磁屏蔽方法的效果不好。本文介绍一种简单易行、磁屏蔽效果较好的方法，实验的结果说明用电工纯铁做探测器的外壳可以达到令人满意的效果。     

Adaptive weighted outer-product learning associative memory

Associative-memory neural networks with adaptive weighted outer-product learning are proposed in this paper. For the correct recall of a fundamental memory (FM), a corresponding learning weight is attached and a parameter called signal-to-noise-ratio-gain (SNRG) is devised. The sufficient conditions for the learning weights and the SNRG's are derived. It is found both empirically and theoretically that the SNRG's have their own threshold values for correct recalls of the corresponding FM's. Based on the gradient-descent approach, several algorithms are constructed to adaptively find the optimal learning weights with reference to global- or local-error measure.     

应用图论及广义简约梯度法进行压力管网优化设计

广义简约梯度法(GRG)是非线性规划算法中最有效的算法之一，本文把图论应用于广义简约梯度法优化的过程中，使输入简便，计算简化，应用GRG算法对武汉市的汉阳管网进行了模拟优化设计，并对管段的计算管径用线性规划法进行标准化，取得了满意的结果     

静压滑环及其应用研究

 介绍了静压滑环的结构特点及其应用． 通过比较静压轴承、配流盘和静压滑环三者之间的不同点，得出静压滑环在结构上是一个自平衡元件，在功能上类似于电刷滑环，因此在固定件和旋转件之间进行流体动力传输时，静压滑环是理想的选择．     

AutoCAD二次开发及在包装机械中的应用

针对包装机械的特点，从二次开发的定义出发，分析比较了AutoCAD二次开发的各种手段形式，给出了应用实例。     

包气带中不同示踪源层条件下核素迁移对比试验

为研究不同示踪源层材料对水份运移和核素迁移的影响，开展了以石英砂和黄土分别为示踪源层载体时Sr、Nd、Ce在包气带中迁移的对比试验。试验历时470d，在两种源层条件下各取土芯样4次。试验结果表明：在喷淋强度为5mm/h、3h/d条件下，Nd和Ce无论在石英砂示踪源层还是黄土示踪源层中浓度峰位均没有明显向下迁移；对于Sr，在黄土示踪源层中，470d后其峰位向下迁移约15cm(按质心计算为10cm左右)，而从石英砂示踪源层中向下迁移不明显（按质心计算，迁移约2.7cm），只是峰位有些展宽。上述结果表明，极薄（7mm）的细石英砂层也能对非饱和入渗水产生明显屏流作用，使得核素从石英砂示踪源层中向下迁移速度减慢。     

Interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd0.96Zn0.04 Te (211)B substrates by molecular beam epitaxy

Double-crystal x-ray rocking curve (DCRC) and secondary-ion mass-spectroscopy (SIMS) measurements have been performed to investigate the effect of rapid thermal annealing on the interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd_0.96Zn_0.04Te (211)B substrates by molecular beam epitaxy. The sharp satellite peaks of the DCRC measurements on a 100-period HgTe/CdTe (100Å/100Å) superlattice show a periodic arrangement of the superlattice with high-quality interfaces. The negative direction of the entropy change obtained from the diffusion coefficients as a function of the reciprocal of the temperature after RTA indicates that the Hg diffusion for the annealed HgTe/CdTe superlattice is caused by an interstitial mechanism. The Cd and the Hg concentration profiles near the annealed HgTe/CdTe superlattice interfaces, as measured by SIMS, show a nonlinear behavior for Hg, originating from the interstitial diffusion mechanism of the Hg composition. These results indicate that a nonlinear interdiffusion behavior is dominant for HgTe/CdTe superlattices annealed at 190°C and that the rectangular shape of HgTe/CdTe superlattices may change to a parabolic shape because of the intermixing of Hg and Cd due to the thermal treatment.     

Effects of a Nd—Fe—B magnetic filler on the crystallization of poly(phenylene sulfide)

The crystallization of poly(phenylene sulfide) (PPS) in a polymer–magnetic Nd—Fe—B powder suspension was studied. Isothermal crystallization behavior was analyzed by way of differential scanning calorimetry, and the kinetics were described via the Avrami equation. The Avrami parameters and the crystallization times were strongly affected by both the particle size and the presence of a coupling agent coated on the filler particles. The small Nd—Fe—B particles exhibited long induction and half‐times, whereas the large particles tended to have short crystallization times. Particles ranging from 38 to 150 μ appeared to have similar crystallization times and to have no significant change in the value of Avrami index with melt crystallization temperature. As a result of these analyses, the dynamic mechanical properties were determined to correlate the fundamental polymer crystallization characteristics and the physical properties of the PPS binder. The enhancement of the wetting of the filler to the binder was promoted through the coupling agent, as confirmed by dynamic mechanical testing performed on the samples. The storage modulus typically decreased because of the presence of the uncoated small particles. Conversely, the loss modulus was enhanced because of the presence of the coated small particles in the PPS binder. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1091–1102, 2002