Dielectric study of side-chain liquid crystalline polyazomethine/fullerene C<Subscript>60</Subscript> nanocomposite

For side-chain liquid crystalline polyazomethine/fullerene C₆₀ nanocomposite (C₆₀ loading is 0.25 wt%), both real and imaginary components of the dielectric permittivity were investigated in wide regions of temperature and frequency. Analysis of frequency dependent permittivity allowed finding three relaxations (α, β ₁ and β ₂) in the nanocomposite. They were attributed to specific modes of molecular mobility. β-relaxations were described with the Arrhenius equation, whereas α-relaxation was described with the Vogel-Fulcher-Tammann equation. Anti-plasticization effect of the C₆₀ doping was shown to be manifested as an increase of the glass transition temperature of the nanocomposite as compared with that of the neat polymer.     

Filler effect on formation and properties of interpenetrating polymer networks based on polyurethane and polyesteracrylate

The formation processes of unfilled and filled interpenetrating polymer networks (IPNs) and some of their physico-mechanical properties have been investigated. The IPN formation kinetics and the constituent network curing rates determine the rate and degree of microphase separation. This in turn determines the boundary layer composition and structure. Introduction of filler into the IPN during formation affects greatly the crosslinking reaction and the microphase segregation of homopolymers. It has been shown that the degree of phase segregation in filled IPNs differs from that in unfilled ones. All the fillers were found to shorten the time of internal stress appearance and to increase its value for IPNs with predominantly high-modulus component content. Some filled IPNs were shown to have greater thermodynamic stability than unfilled ones.     

Chitosan-based fiber-sponge materials as a promising tool for microalgae harvesting from Lake Baikal

Mass eutrophication of microalgae and cyanobacteria is observed in Lake Baikal in the past decade. In this paper, the concept of replaceable adsorption filter material based on chitosan flocculant filler and chlorinated polyvinyl chloride polymer nonwoven material are proposed. Functional and mechanical properties and morphology of the material are investigated depending on a packing density and a degree of chitosan filling. The introduction of 45% chitosan increases the Young's modulus up to 10 times, and it makes the material more rigid in 2.8 times. The high efficiency of sorption and growth inhibition of cumulative biomass culture was shown. The biomass source is taken from the coast of Barguzinsky Bay of Lake Baikal. Dominant species is microalgae of Scenedesmus genus.     

Improvements to Mixing of Natural Gas and Hot-Air Blast in the Air Tuyeres of Blast Furnaces with Thermal Insulation of the Blast Duct

Metallurgist - Using natural gas as an additional fuel in a blast furnace is known to reduce coke consumption during blast-furnace production. In a standard tuyere, the hot blast pushes the natural...     

Combined speciation analysis by X-ray absorption near-edge structure spectroscopy, ion chromatography, and solid-phase microextraction gas chromatography-mass spectrometry to evaluate biotreatment of concentrated selenium wastewaters

In this study we evaluate the potential of anaerobic granular sludge as an inoculum for the bioremediation of selenium-contaminated waters using species-specific analytical methods. Solid species formed by microbial reduction were investigated using X-ray absorption near-edge structure (XANES) spectroscopy at the selenium K-edge. Furthermore, dissolved selenium species were specifically determined by ion chromatography (IC) and solid-phase microextraction gas chromatography-mass spectrometry (SPME-GC-MS). Least-squares linear combination of the XANES spectra for samples incubated with the highest selenate/selenite concentrations (10(-3) M) show the predominance of elemental selenium and a Se(-I) selenide, such as ferroselite, the thermodynamically most stable iron selenide. In contrast, elemental selenium and Se(-II) selenides are the main species detected at the lower selenate/selenite concentrations. In each repeated fed batch incubation, most aqueous selenite anions were converted into solid selenium species, regardless of the type of electron donor used (acetate or H(2)/CO(2)) and the selenium concentration applied. On the other hand, at higher concentrations of selenate (10(-4) and 10(-3) M), significant amounts of the oxyanion remained unconverted after consecutive incubations. SPME-GC-MS demonstrated selenium alkylation with both electron donors investigated, as dimethyl selenide (DMSe) and dimethyl diselenide (DMDSe). Selenite was even more alkylated in the presence of H(2)/CO(2) (maximum 2156 μg of Se/L of DMSe + DMDSe) as compared to acetate (maximum 50 μg of Se/L). In contrast, selenate was less alkylated using both electron donors (maximum 166 and 3 μg of Se/L, respectively). The high alkylation potential for selenite limits its bioremediation in selenium laden waters involving H(2)/CO(2) as the electron donor despite the fact that nontoxic elemental selenium and thermodynamically stable metal selenide species are formed.     

Detection of endogenous Snf1 and its activation state: application to Saccharomyces and Candida species

The stress-response Snf1 protein kinase of Saccharomyces cerevisiae serves as a powerful model for studies of the eukaryotic Snf1/AMP-activated protein kinase (AMPK) family. Central to studies of Snf1 are methods that determine its activation state under various physiological and genetic conditions. Here, we have developed a convenient and sensitive method for immunoblot analysis of endogenous yeast Snf1 and its activation-loop threonine (Thr210) phosphorylation. The method employs readily obtainable reagents and yields results that faithfully reflect the environmental and genetic conditions tested. Using our method, we have obtained evidence that Snf1 remains stress-regulated in reg1 Delta cells, revealing the existence of a Snf1 signalling mechanism(s) that is independent of Reg1-PP1 phosphatase. In addition to strains of common laboratory S. cerevisiae backgrounds, we have applied the method to two pathogenic Candida species, C. glabrata and C. albicans. We have detected proteins whose gel mobilities, immune properties and regulation patterns are consistent with those expected for the corresponding Snf1 homologues. Because Snf1 activation is a sensitive marker of several types of stress, including artifactual stresses associated with common cell harvesting and protein extraction procedures, the convenient and efficient protein extraction method described here should be advantageous for SDS-PAGE and immunoblot analyses of stress-regulated and other proteins from various yeast species.     

Drosophila as a Model System for Studying of the Evolution and Functional Specialization of the Y Chromosome

The Y chromosome is one of the sex chromosomes found in males of animals of different taxa, including insects and mammals. Among all chromosomes, the Y chromosome is characterized by a unique chromatin landscape undergoing dynamic evolutionary change. Being entirely heterochromatic, the Y chromosome as a rule preserves few functional genes, but is enriched in tandem repeats and transposons. Due to difficulties in the assembly of the highly repetitive Y chromosome sequence, deep analyses of Y chromosome evolution, structure, and functions are limited to a few species, one of them being Drosophila melanogaster. Despite Y chromosomes exhibiting high structural divergence between even closely related species, Y-linked genes have evolved convergently and are mainly associated with spermatogenesis-related activities. This indicates that male-specific selection is a dominant force shaping evolution of Y chromosomes across species. This review presents our analysis of current knowledge concerning Y chromosome functions, focusing on recent findings in Drosophila. Here we dissect the experimental and bioinformatics data about the Y chromosome accumulated to date in Drosophila species, providing comparative analysis with mammals, and discussing the relevance of our analysis to a wide range of eukaryotic organisms, including humans.     

Combustion behavior of a Ti + TiC mixture in a nitrogen coflow

Combustion of powder and granular mixtures of TiC + Ti in a quartz tube purged with nitrogen was studied. Mixtures based on fine and coarse-grained TiC were used. It is found that purging of a powder mixture of bulk density with fine titanium carbide with nitrogen coflow does not lead to the spread of the flame front, whereas granular mixtures burn at the same pressure difference. Mixtures based on coarse-grained titanium carbide powder burn in both powder and granular form. The burning rate of a granular mixture of TiC + Ti with coarse-grained titanium carbide is significantly higher than when using fine titanium carbide. It is shown that in the case of a coarse-grained TiC, granulation of the mixture of TiC + Ti significantly improves the degree of nitriding of the synthesis products compared to the powder mixture. During combustion of granular mixtures of TiC + Ti, in contrast to powder mixtures of the same composition, a singlephase product of approximate composition TiC_0.5N_0.44 is formed as a result of synthesis.     

TNT和有机染料废水的光催化氧化动力学特性

利用光催化氧化技术能有效处理各类有机废水,具有高效、低选择性和不产生二次污染的特点,探讨了循环式浆态光催化反应器中有机染料和TNT模拟生产废水的光催化氧化特性以及光催化氧化动力学。基于羟基自由基生成、扩散以及羟基自由基与污染物分子的反应,建立了相应的光催化氧化动力学模型。结果表明,采用光催化氧化技术去除有机染料和TNT效果明显。光照时间为6h时,在一定的初始TNT浓度下,模拟红水中TNT去除率达90％以上。对不同染料和TNT不同初始浓度下的光催化氧化反应动力学研究表明,此过程符合拟一级动力学。所提出的光催化氧化动力学模型能够很好地描述有机染料和TNT的光催化氧化过程。