Human peripheral eosinophils express functional interferon-gamma receptors (IFN-gammaR)

In order to determine whether or not IFN-gammaR is associated with regulatory mechanisms on human eosinophil function, we examined the expression of functional IFN-gammaR on human peripheral eosinophils. In this study, peripheral blood eosinophils were obtained from seven normal controls and 12 patients (bronchial asthma, n = 9, and hypereosinophilic syndrome (HES), n = 3), and the purity of eosinophils was 97.11 +/- 2.31%, n = 19. We first showed that anti-IFN-gammaR alpha-chain MoAb reacted with all tested eosinophils of both normal controls and patients by flow cytometry analysis. We also showed expression of mRNA for the alpha-chain of IFN-gammaR in all purified eosinophils of six individuals. Further, to characterize IFN-gammaR on eosinophils, we did binding experiments with 125I-IFN-gamma on purified peripheral eosinophils. The linear Scatchard plot indicated a single type of high-affinity binding sites (dissociation constant (Kd) = 3.89-4.95 x 10(-10) M, numbers of binding sites = 183-233/cell, n = 3). To determine whether IFN-gammaR on eosinophils is functional, we examined surface eosinophilic cationic protein (ECP) and CD69 induction after IFN-gammaR ligation with recombinant human IFN-gamma (rhIFN-gamma) on eosinophils by flow cytometry. rhIFN-gamma stimulation significantly induced both ECP and CD69 expression on the 2-18 h-cultured eosinophils in a dose-dependent manner. Further, the effects of rhIFN-gamma stimulation were significantly blocked by both a neutralizing anti-IFN-gamma MoAb and a blocking anti-IFN-gammaR MoAb. These results suggest that human peripheral eosinophils express functional IFN-gammaR.     

Pentacene-based organic thin-film transistors

Organic thin-film transistors using the fused-ring polycyclic aromatic hydrocarbon pentacene as the active electronic material have shown mobility as large as 0.7 cm²/V-s and on/off current ratio larger than 10⁸; both values are comparable to hydrogenated amorphous silicon devices. On the other hand, these and most other organic TFT's have an undesirably large subthreshold slope. We show here that the large subthreshold slope typically observed is not an intrinsic property of the organic semiconducting material and that devices with subthreshold slope similar to amorphous silicon devices are possible     

Features of ultrasonic wave propagation to identify defects in composite materials modelled by finite element method

A two-dimensional plane strain finite element model with absorbing boundary condition has been developed to investigate the ultrasonic wave propagation in isotropic and orthotropic media. It is capable of simulating the experimental pulse echo technique to obtain A-scan data, when a short duration pulse is transmitted into a domain with or without a flaw. The flaw can either be a crack or an inclusion of different material such as a Teflon insert or a resin rich zone. After performing FFT on the A-scan data, frequency domain feature analysis is done. The study provides a guideline regarding the suitability of certain harmonics sensitive to certain types of flaw. The simulation shows other important artifacts of wave propagation such as mode conversion and scattering due to the presence of flaws.     

Hinokitiol induces differentiation of teratocarcinoma F9 cells

Hinokitiol, a constituent of the wood of Chamaecyparis taiwanensis, was found to induce differentiation of teratocarcinoma F9 cells. When examined by the agar-overlay method, in which expression of plasminogen activator as a differentiation marker protein was detected, this compound exhibited a dose- and time-dependent induction. Induction of differentiation by hinokitiol occurred irreversibly and required its addition for more than 12h. Among its structure-related compounds tested, tropolone and two colchicine-related compounds exerted potent activities comparable to that of hinokitiol. These findings indicate that free tropolone structure in the molecules plays an essential role in inducing differentiation of F9 cells. Hinokitiol showed a strong inhibitory effect of DNA synthesis in very early stages of culture, suggesting that this effect may be responsible for triggering differentiation of F9 cells.     

A method for system identification using the optimality criteria optimization approach

An algorithm similar to the optimality criteria approach used in structural optimization is presented for identifying stiffnesses of structural members by using vibration test data. A set of equivalent static inertia forces are obtained from the vibration analysis using d'Alembert's principle and are used to solve the multiple displacement constraint problem. The displacement constraint values are specified based on the measured experimental modal displacement data at critical locations. The algorithm is used to find the changes needed in the stiffnesses of the elements and the distribution of nonstructural mass of the nominal analytical model to correlate the analytical and experimental data. The algorithm alternates between the vibration analysis and static analysis to find the equivalent load vector and modify the stiffnesses. The identified stiffness properties of the structural elements can be used to control and study the dynamic response of the structure.     

Content of carbohydrates and trace elements in a group of non-alcoholic drinks

BACKGROUND: In order to elaborate recommendations for the dietetic care of diabetic patients and other clinical disorders we have measured the concentration of carbohydrates and trace elements in a group of non alcoholic refreshments of current use in Spain. MATERIAL AND METHODS: Thirty refreshments were classified into 10 groups. Glucose and phosphate were measured by hexokinase and reduction of phospho-molybdate methods respectively in an autoanalyzer Dax-72. Glucose and fructose were analyzed by cellulose thin-layer chromatography; glucose, fructose and sucrose by gas chromatographys. Sodium and potassium by emission spectrophotometry and calcium, magnesium, iron, copper and zinc by atomic absorption spectrophotometry. RESULTS: Light refreshments and soft drinks have no carbohydrates. Isotonic beverages, fruit juices, cool tea and non alcoholic beers had less than 10 g/dl. Tonic waters, Fanta, different coles, non alcoholic bitter and others had more than 10 g/dl. Sodium levels between 15-20 mEq/l were found in the isotonic beverages and 7-Up and levels of 7 mEq/l in the others. Potassium values between 15-40 mEq/l were found in the fruit juices, 3-4 mEq/l in Gatorade and less than 1 mEq/l in the others. CONCLUSIONS: Light refreshments and soft drinks contain low concentrations of carbohydrates and sodium. Fruit juices have high potassium concentration. Such information can be especially useful for dietetic care of diabetic patients.     

Condensation polymerization of pyrogallol and benzaldehyde

Novolac-type polycondensation of benzaldehyde (B) and pyrogallol (P) has been carried out at 60°C, 75°C and 90°C and at B/P mole ratios of 1.5 and 3.0 using phosphoric acid as catalyst. The reaction follows a 2nd order rate law. By using GC consumption data of benzaldehyde and pyrogallol, kinetic parameters such as the overall rate constants, activation energies (E_a) and logA values are investigated. The activation energies for 1.5 and 3.0 B/P mole ratios are found as 62.3 kJ mol^?1 and 56.4 kJ mol^?1, respectively. The molecular weights of the resins determined by measuring intrinsic viscosities (25°C, THF) are in the range of 0.03 to 0.07 dL g^?1 at various temperatures and B/P mole ratios.     

Deep levels,electrical and optical characteristics in SnTe-Doped GaSb Schottky Diodes

The GaSb layers investigated were grown directly on GaAs substrates by molecular beam epitaxy (MBE) using SnTe source as the n-type dopant. By using admittance spectroscopy, a dominant deep level with the activation energy of 0.23-0.26 eV was observed and its concentration was affected by the Sb₄/Ga flux ratio in the MBE growth. A lowest deep-level concentration together with a highest mobility was obtained for GaSb grown at 550°C under a Sb₄/Ga beam equivalent pressure (BEP) ratio around 7, which should correspond to the lowest ratio to maintain a Sb-stabilized surface reconstruction. In the Hall measurement, an analysis of the temperature-dependent mobility shows that the ionized impurity concentration increases proportionally with the sample’s donor concentration, suggesting that the ionized impurity was introduced by an SnTe source. In addition, optical properties of an undoped p-, a lightly and heavily SnTe-doped GaSb layers were studied by comparing their photoluminescence spectra at 4.5K.     

Uniaxial tensile response of microfibre reinforced cement composites

Microfibre reinforced cement composites reinforced with high volume fractions of carbon, steel and polypropylene fibres were tested in uniaxial tension. Composites investigated included those with only one type of fibre (mono-fibre composites) and those with two or more types of fibres (hybrid-fibre composites) in the same mix. Considerable strengthening, toughening and stiffening of the host matrix due to microfibre reinforcement were observed. In the hybrid-fibre composites, different fibres appear to act as additive phases; i.e., they maintain their individual reinforcing capabilities. The composites were also impact tested in uniaxial tension using a newly designed instrumented impact machine. When compared with static test results, considerable sensitivity to stress rate was noted; composites were found to be stronger and tougher under impact and the improvements were more pronounced at higher fibre volume fractions. The potential of these composites for use in thin sheet products and other similar applications is recognized, and the need for continued research is stressed.