Microwave Dielectrics in the (La1/2Na1/2)TiO3–Ca(Fe1/2Nb1/2)O3 System

Dielectric properties of the system (1 − x)(La_1/2Na_1/2)TiO₃– _x Ca(Fe_1/2Nb_1/2)O₃, where 0.4 # x # 0.6, have been investigated at microwave frequencies. The temperature coefficient of resonant frequency (τ_f), nearly 0 ppm/°C, was realized at x = 0.58. These ceramics had perovskite structure and showed relatively low dielectric losses. A new dielectric material applicable to microwave devices having Q · f of 12000–14000 GHz and a dielectric constant (ε_r) of 59–60 has been obtained at 1300–1350°C for 5–15 h sintering.     

Microwave Dielectric Properties of CaTiO3-Ca(Al1/2Ta1/2)O3 Ceramics

The microwave dielectric properties of CaTi_1-χ(Al_1/2Ta_1/2)_cHO₃ solid solutions (0.3 ≤χ≤ 0.5) have been investigated. The ceramic samples had perovskite structures similar to CaTiO₃. The partial substitution of Ti₄₊ by a coupled Al₃₊/Ta_s+ permitted improvement of the quality factor Q . The dielectric constant (τ_r) and temperature coefficient of resonant frequency (τ_r) decrease rapidly with an increase of χ. A new high-quality microwave dielectric material was found at χ= 0.46 with σ_r= 46.5, Q f = 27300 GHz, and π_f= 0 ppm/°C. The relationship between microstructures and dielectric properties is presented.     

Revisiting tetranitrophenolsulfonephthalein

Among the vast series of phenolsulfonephthalein dyes, the nitro derivatives and especially 3,3′,5,5′‐tetranitrophenolsulfonephthalein (nitrophenol crimson) remain practically unexplored, whereas the halogen and alkyl derivatives have been studied comprehensively. This striking difference is probably due to the enormous influence of the four NO₂ groups on the properties of the dye. As a result, the protolytic behaviour is unlike even that of tetrabromo phenolsulfonephthalein, and the recognised scheme of acid–base and tautomeric equilibrium of the sulfonephthaleins is unable to explain it. The molecular form H₂R was isolated as a sultonic tautomer, and an X‐ray crystal structure analysis was carried out. Our studies of the UV‐vis absorption spectra in water, methanol, dimethyl sulfoxide, acetonitrile, acetone, and dichloromethane, as well as in aqueous micellar solutions of surfactants, allowed us to evaluate the true molar absorptivity of the dianion R^2?, and to elucidate the enormous tendency to form yellow trianionic carbinol ROH^3?, even in the presence of traces of H₂O. Nuclear magnetic resonance and electrospray data confirm the proposed scheme of ionisation and tautomerism of nitrophenol crimson.     

Interdiffusion between silica thin films and soda-lime glass substrate during annealing at high temperature

We study the diffusive interaction between soda-lime glass substrates and sputtered aluminum-doped silica thin films at 650°C, the temperature of commercial soda-lime glass shaping or tempering. A first rapid migration of alkali ions from substrate to thin film has been described in a companion paper (J Am Ceram Soc. 2018;101:1516). Using the same samples as (J Am Ceram Soc. 2018;101:1516), we focus here on later interactions, when the layer is consumed by the substrate resulting from diffusive interactions. Using Secondary Ion Mass Spectroscopy profilometry, we show that the interdiffusion rate increases with the aluminum doping content of the layer. We show that the alkali uptake of silica layers accelerates diffusive exchanges with the substrate, consistently with a decrease of viscosity of the layer. Diffusion profiles of silicon are well reproduced when solving the diffusion equation for a diffusivity having an exponential dependence with silicon concentration. The diffusivity of aluminum is shown to be 10 times slower than the diffusion of silicon. Specific exchanges of the two network formers with network modifiers are deduced from the composition-space trajectories, providing evidence for multicomponent diffusive couplings between species.     

Phase diagram of the Li2SO4–Na2SO4 system

The thermal analysis and X-ray powder diffraction studies of the Li₂SO₄–Na₂SO₄ system, including the high-temperature X-ray diffraction technique, have elucidated four phases of variable composition: three solid solutions based on the α-Li₂SO₄, α-Na₂SO₄, and α-LiNaSO₄ high-temperature polymorphs, and a low-temperature β-LiNaSO₄ phase. α-Na₂SO₄-Base solid solution disintegrates into two phases via a monotectoid phase transformation. It is quite probable that the monotectoid process is related to the conversion of the second-order phase transition to the first-order phase transition.     

Synergistic fire-retardancy properties of melamine coated ammonium poly(phosphate) in combination with rod-like mineral filler attapulgite for polymer-modified bitumen roofing membranes

A novel intumescent (carbonization, acid donor and foaming) fire retardant that mimics carbon nanotubes was introduced into bitumen roofing and characterized using cone calorimetry as the main analytical tool. The experimental results indicate that 18% (by mass) attapulgite mineral (ATTP) mixed with base bitumen decreased the peak heat release rate per unit area (pHRRPUA) by 10%. Further, incorporation of melamine coated ammonium polyphosphate (MAPP) decreased the pHRRPUA by 52% and a mixture of these (3:1, ATTP:MAPP) decreased the pHRRPUA by 25% as compared to adding CaCO₃ as a filler. The residual mass loss after the cone test was also improved with up to 3%. The indication of a positive synergistic flame retardant effect of the ATTP-MAPP mixture is supported by thermogravimetric analysis. The addition of this rod-like mineral improved the general fire retardant properties of the base bitumen and increased the viscosity. Therefore, the polymer-modified bitumen with both fire retardant and rheological properties (providing mechanical strength) is a promising novel approach in the design of bitumen roofing membranes.     

Developmental and Reproductive Effects of Iron Oxide Nanoparticles in Arabidopsis thaliana

Increasing use of iron oxide nanoparticles in medicine and environmental remediation has led to concerns regarding exposure of these nanoparticles to the public. However, limited studies are available to evaluate their effects on the environment, in particular on plants and food crops. Here, we investigated the effects of positive (PC) and negative (NC) charged iron oxide (Fe₂O₃) nanoparticles (IONPs) on the physiology and reproductive capacity of Arabidopsis thaliana at concentrations of 3 and 25 mg/L. The 3 mg/L treated plants did not show evident effects on seeding and root length. However, the 25 mg/L treatment resulted in reduced seedling (positive-20% and negative-3.6%) and root (positive-48% and negative-negligible) length. Interestingly, treatment with polyethylenimine (PEI; IONP-PC coating) also resulted in reduced root length (39%) but no change was observed with polyacrylic acid (PAA; IONP-NC coating) treatment alone. However, treatment with IONPs at 3 mg/L did lead to an almost 5% increase in aborted pollen, a 2%–6% reduction in pollen viability and up to an 11% reduction in seed yield depending on the number of treatments. Interestingly, the treated plants did not show any observable phenotypic changes in overall size or general plant structure, indicating that environmental nanoparticle contamination could go dangerously unnoticed.     

Structure and Thermal Expansion of YSZ and La2Zr2O7 Above 1500°C from Neutron Diffraction on Levitated Samples

High‐temperature time‐of‐flight neutron diffraction experiments were performed on cubic yttria‐stabilized zirconia (YSZ, 10 mol% YO_1.5) and lanthanum zirconate (LZ) prepared by laser melting. Three spheroids of each composition were aerodynamically levitated and rotated in argon flow and heated with a CO₂ laser. Unit cell, positional and atomic displacement parameters were obtained by Rietveld analysis. Below ~1650°C the mean thermal expansion coefficient (TEC) for YSZ is higher than for LZ (13 ± 1 vs. 10.3 ± 0.6) × 10^?6/K. From ~1650°C to the onset of melting of LZ at ~2250°C, TEC for YSZ and LZ are similar and within (7 ± 2) × 10^?6/K. LZ retains the pyrochlore structure up to the melting temperature with Zr coordination becoming closer to perfectly octahedral. Congruently melting LZ is La deficient. The occurrence of thermal disordering of oxygen sublattice (Bredig transition) in defect fluorite structure was deduced from the rise in YSZ TEC to ~25 × 10^?6/K at 2350°C–2550°C with oxygen displacement parameters (U_iso) reaching 0.1 Å², similar to behavior observed in UO₂. Acquisition of powder‐like high‐temperature neutron diffraction data from solid‐levitated samples is feasible and possible improvements are outlined. This methodology should be applicable to a wide range of materials for high‐temperature applications.     

磁控溅射法镀制氮化铝薄膜特性研究

氮化铝薄膜具有高折射率,良好的化学稳定性,耐磨摩、高电阻等特性在微电子器件和光学薄膜中有着广泛地应用.本文研究了反应式磁控溅射方法利用Ar/N2混合气体镀制氮化铝薄膜的工艺过程,实验表明在高真空和高泵浦速率条件下,放电电压直接依赖于反应气体珠浓度.薄膜的折射率,消光系数和薄膜硬度都依赖于氮气浓度的比例.通过工艺研究,找到了氮气在不同浓度下对氮化铝薄膜的折射率,消光系数以及薄膜硬度的影响,找出了镀制氮化镀制氮化铝薄膜的最佳工艺参数.在Ar/N2工作气体中氮气含量保持在40%条件下,用反应式磁控溅射方法,可以精确镀制出良好的氮化铝薄膜,其中折射率范围在2.25~2.4之间,消光系数为10-3,薄膜显微硬度大于20GPa.该薄膜可以广泛应用于微电子器件和光电器件上.