Analysis of an Approximate Decorrelating Detector

In this paper an approximate decorrelating detector is analyzed on the basis of a first order approximation to the inverse crosscorrelation matrix of signature waveforms. The approximation is fairly accurate for systems with low crosscorrelations and is exact in the two-user synchronous case. We present an exact as well as approximate analysis of the bit-error-rate performance of this detector on a channel that is subject to flat fading, and also specifically for the case of random signature waveforms. The detector outperforms the conventional matched filter receiver in terms of BER. The approximate decorrelator (while not being near-far resistant like the decorrelating detector) is fairly robust to imperfections in power control. Power trade-off regions are identified which characterize the significant advantage that the approximate decorrelator provides over the matched filter receiver. The reduced complexity of the approximate decorrelator and performance gains over the conventional matched filter makes it a viable alternative for implementation in practical CDMA systems, in particular in those where the signature waveforms span many symbol intervals.     

Optimized Prototype Filter Based on the FRM Approach for Cosine-Modulated Filter Banks

A design procedure for frequency-response masking (FRM) prototype filters of cosine-modulated filter banks (CMFBs) is proposed. In the given method, we perform minimization of the maximum attenuation level in the filters stopband, subject to intersymbol interference (ISI) and intercarrier interference (ICI) constraints. For optimization, a quasi-Newton algorithm with line search is used, and we provide simplified analytical expressions to impose the interference constraints, which greatly reduce the computational complexity of the optimization procedure. The result is lower levels of ISI and ICI for a predetermined filter order, or a reduced filter complexity for given levels of interferences. It is then illustrated how the FRM-CMFB structure is suitable for implementing filter banks with a large number of bands, yielding sharp transition bands and small roll-off factors, which is an attractive feature for a wide range of practical applications.     

A linearized model for estimating the performance of submerged resonant wave energy converters

A realistic performance analysis of oscillating water column wave energy converters (WECs) addresses to a set of non-linear differential equations that need to be integrated in time, by using a stochastic approach, under the hypothesis of random wind-generated sea waves, for all the sea states which characterize the location of the system. Non-linearities of the differential equations have several origins:

• minor and major losses of the unsteady flow of water and air;

• compressibility of air and heat exchange with the walls of the air chamber;

• non-linear characteristics of the turbine.

Under the hypothesis of random sea waves with Gaussian distribution, the authors propose an original methodology for linearizing the differential equations that describe the flow motion inside a wholly submerged WEC. Under such hypothesis, the linearized model can be used for predicting the power output by means of the calculations in the frequency domain and for control design. The developed methodology has been applied to the estimation of the performance of the new “resonant sea wave energy converters”, called REWEC, patented by Boccotti in 1998, and consisting of several caissons, characterized by a structure similar to the caissons of the traditional breakwaters and placed on the seabed, close one to each other, to form a submerged breakwater. Each caisson is connected to a vertical duct wholly beneath the sea level, where a hydraulic Wells turbine is placed.The matching between turbine and resonance characteristic of the system is carefully analysed in order to maximize the energy conversion efficiency.Some results, given for a small installation in the Mediterranean sea, confirm that the REWEC system is able to absorb a large share of the incident wave energy due to a very simple regulation system which permits the tuning on sea states with different significant heights.     

A visible-light and infrared video database for performance evaluation of video/image fusion methods

Multidimensional Systems and Signal Processing - In general, the fusion of visible-light and infrared images produces a composite representation where both data are pictured in a single image. The...     

A dynamically reconfigurable monolithic CMOS pressure sensor for smart fabric

This paper presents a mixed-signal system-on-chip (SOC) for sensing capacitance variations, enabling the creation of pressure-sensitive fabric. The chip is designed to sit in the corner of a smart fabric such as elastic foam overlaid with a matrix of conductive threads. When pressure is applied to the matrix, an image is created from measuring the differences in capacitance among the rows and columns of fibers patterned on the two opposite sides of the elastic substrate. The SOC approach provides the flexibility to accommodate for different fabric sizes and to perform image enhancement and on-chip data processing. The chip has been designed in a 0.35-/spl mu/m five-metal one-poly CMOS process working up to 40 MHz at 3.3 V of power supply, in a fully reconfigurable arrangement of 128 I/O lines. The core area is 32 mm/sup 2/.     

Evidence for the Band‐Edge Exciton of CuInS2 Nanocrystals Enables Record Efficient Large‐Area Luminescent Solar Concentrators

Ternary I‐III‐VI₂ nanocrystals (NCs), such as CuInS₂, are receiving attention as heavy‐metals‐free materials for solar cells, luminescent solar concentrators (LSCs), LEDs, and bio‐imaging. The origin of the optical properties of CuInS₂ NCs are however not fully understood. A recent theoretical model suggests that their characteristic Stokes‐shifted and long‐lived luminescence arises from the structure of the valence band (VB) and predicts distinctive optical behaviours in defect‐free NCs: the quadratic dependence of the radiative decay rate and the Stokes shift on the NC radius. If confirmed, this would have crucial implications for LSCs as the solar spectral coverage ensured by low‐bandgap NCs would be accompanied by increased re‐absorption losses. Here, by studying stoichiometric CuInS₂ NCs, it is revealed for the first time the spectroscopic signatures predicted for the free band‐edge exciton, thus supporting the VB‐structure model. At very low temperatures, the NCs also show dark‐state emission likely originating from enhanced electron‐hole spin interaction. The impact of the observed optical behaviours on LSCs is evaluated by Monte Carlo ray‐tracing simulations. Based on the emerging device design guidelines, optical‐grade large‐area (30×30 cm²) LSCs with optical power efficiency (OPE) as high as 6.8% are fabricated, corresponding to the highest value reported to date for large‐area devices.     

Material requirements for the adoption of unconventional silicon crystal and wafer growth techniques for high‐efficiency solar cells

Silicon wafers comprise approximately 40% of crystalline silicon module cost and represent an area of great technological innovation potential. Paradoxically, unconventional wafer‐growth techniques have thus far failed to displace multicrystalline and Czochralski silicon, despite four decades of innovation. One of the shortcomings of most unconventional materials has been a persistent carrier lifetime deficit in comparison to established wafer technologies, which limits the device efficiency potential. In this perspective article, we review a defect‐management framework that has proven successful in enabling millisecond lifetimes in kerfless and cast materials. Control of dislocations and slowly diffusing metal point defects during growth, coupled to effective control of fast‐diffusing species during cell processing, is critical to enable high cell efficiencies. To accelerate the pace of novel wafer development, we discuss approaches to rapidly evaluate the device efficiency potential of unconventional wafers from injection‐dependent lifetime measurements. Copyright © 2015 John Wiley & Sons, Ltd.     

0.75 V supply nanowatt resistorless sub-bandgap curvature-compensated CMOS voltage reference

This work presents a resistorless self-biased and small area sub-bandgap voltage reference that works in the nano-ampere consumption range with 0.75 V of power supply. The circuit applies a curvature compensation technique that allows an extended temperature range without compromising the temperature stability. The behavior of the circuit is analytically described, and a design methodology is proposed which allows the separate adjustment of the bipolar junction transistor bias current and its curvature compensation. Simulation results are presented for a 180 nm CMOS process, where a reference voltage of 469 mV is designed, with a temperature coefficient of 5 ppm/°C for the ?40 to 125 °C extended temperature range. The power consumption of the whole circuit is 16.3 nW under a 0.75 V power supply at 27 °C. The estimated silicon area is 0.0053 mm².     

Transmission line routing for reduced external field disturbance

When immersed in a disturbing electromagnetic field, electronic systems are subject to interference due to the energy injected by the external field into the system through the electronic units and, especially, through the transmission lines connecting units one another. The issue of reducing the unwanted energy injection through connecting transmission lines is addressed in this contribution from the point of view of the routing, i.e. of the disposition of the connecting lines that minimizes the injection. The problem is formulated as an optimization problem, dealt with by the simulated annealing minimization technique combined with an efficient way of computing the field coupling to the lines. Results are reported for various cases, and the relation between the characteristics of the interfering field and the efficiency of the reduction is discussed.