Einfluss der Feuchtebeladung bei der Druckbeanspruchung von Granulaten

The material behavior of γ‐Al₂O₃‐, zeolite 4A‐ und sodium benzoate granules at compression has been experimentally studied. The material behavior has been found to be dominant elastic, elastic‐plastic and dominant plastic. Additionally, the influence of moisture content on the material behavior has been investigated. The force‐displacement curves have been approximated using suitable mechanical models.     

Selectively Promoting or Preventing Osteoblast Growth on Titanium Functionalized with Polyelectrolyte Multilayers

Titanium plays an important role in medical applications, such as hip joint implants or fixation plates. These implants must perform differently depending on their clinical application. In particular, the osseointegrative properties required of the implant vary with clinical application. The present work is aimed at the functionalization of titanium surface using polyelectrolyte multilayers consisting of natural biopolymers and testing their cell adhesive properties with respect to the osseointegration capacity. Multilayered coatings were created from chitosan (Chi), hyaluronic acid (HA), and gelatine (Gel) through layer‐by‐layer deposition. Cell adhesion, proliferation, and viability were tested in vitro with the human osteoblast cell line CAL‐72 at timescales up to 7 d. Two multilayer coatings consisting of alternated chitosan/gelatin or chitosan/hyaluronic acid layers with the outmost layer of gelatin (Chi/Gel) or hyaluronic acid (Chi/HA), respectively, were tested. The experimental results showed that surfaces functionalized with Chi/Gel and Chi/HA multilayers demonstrated a good initial adhesion of osteoblasts. After 4 d culturing, osteoblast cells were almost completely detached from the substrates functionalized with Chi/HA multilayers. In contrast to Chi/HA, the proliferation of osteoblasts on substrates with Chi/Gel multilayer coatings was statistically significantly higher compared to the control titanium. We have shown that the growth of osteoblasts can be enhanced or completely prevented on a titanium surface functionalized with polyelectrolyte multilayers consisting of natural biopolymers, as desired. Both multilayer coatings, Chi/Gel and Chi/HA, have potential for applications in the field of titanium implants, where rapid osseointegration is essential, and/or where no ingrowth of the implant is desired, respectively.     

Effect of Loading History on Stress Corrosion Cracking of 7075-T651 Aluminum Alloy in Saline Aqueous Environment

An experimental study of stress corrosion cracking (SCC) was conducted on 7075-T651 aluminum alloy in a chromate-inhibited, acidic 3.5 pct sodium chloride aqueous solution using compact tension specimens with a thickness of 3.8 mm under permanent immersion conditions. The effects of loading magnitude, overload, underload, and two-step high-low sequence loading on incubation time and crack growth behavior were investigated. The results show that the SCC process consists of three stages: incubation, transient crack growth, and stable crack growth. The incubation time is highly dependent on the load level. Tensile overload or compressive underload applied prior to SCC significantly altered the initiation time of corrosion cracking. Transition from a high to a low loading magnitude resulted in a second incubation but much shorter or disappearing transient stage. The stable crack growth rate is independent of stress intensity factor in the range of 10 to 22 MPa ?{textm} . sqrt {text{m}} .     

Energy absorption during compression and impact of dry elastic-plastic spherical granules

The discrete modelling and understanding of the particle dynamics in fluidized bed apparatuses, mixers, mills and others are based on the knowledge about the physical properties of particles and their mechanical behaviour during slow, fast and repeated stressing. In this paper model parameters (modulus of elasticity, stiffness, yield pressure, restitution coefficient and strength) of spherical granules (γ-Al₂O₃, zeolites 4A and 13X, sodium benzoate) with different mechanical behaviour have been measured by single particle compression and impact tests. Starting with the elastic compression behaviour of granules as described by Hertz theory, a new contact model was developed to describe the force-displacement behaviour of elastic-plastic granules. The aim of this work is to understand the energy absorption during compression (slow stressing velocity of 0.02 mm/s) and impact (the impact velocity of 0.5–4.5 m/s) of granules. For all examined granules the estimated energy absorption during the impact is found to be far lower than that during compression. Moreover, the measured restitution coefficient is independent of the impact velocity in the examined range and independent of the load intensity by compression (i.e. maximum compressive load). In the case of repeated loading with a constant load amplitude, the granules show cyclic hardening with increasing restitution coefficient up to a certain saturation in the plastic deformation. A model was proposed to describe the increase of the contact stiffness with the number of cycles. When the load amplitude is subsequently increased, further plastic deformation takes place and the restitution coefficient strongly decreases.     

A probability model of system downtime with implications for optimal warranty design

Traditional approaches toward modeling the availability of a system often do not formally take into account uncertainty over the parameter values of the model. Such models are then frequently criticized because the observed reliability of a system does not match that predicted by the model. This paper extends a recently published segregated failures model so that, rather than providing a single figure for the availability of a system, uncertainty over model parameter values is incorporated and a predictive probability distribution is given. This predictive distribution is generated in a practical way by displaying the uncertainties and dependencies of the parameters of the model through a Bayesian network (BN). Permitting uncertainty in the reliability model then allows the user to determine whether the predicted reliability was incorrect due to inherent variability in the system under study, or due to the use of an inappropriate model. Furthermore, it is demonstrated how the predictive distribution can be used when reliability predictions are employed within a formal decision‐theoretic framework. Use of the model is illustrated with the example of a high‐availability computer system with multiple recovery procedures. An BN is produced to display the relations between parameters of the model in this case and to generate a predictive probability distribution of the system's availability. This predictive distribution is then used to make two decisions under uncertainty concerning the offered warranty policies on the system: a qualitative decision and an optimization over a continuous decision space. Copyright © 2009 John Wiley & Sons, Ltd.     

The method of approximate fundamental solutions (MAFS) for Stefan problems

The paper presents a new meshless numerical technique for solving one and two-dimensional Stefan problems. The technique presented is based on the use of the delta-shaped functions and the method of approximate fundamental solutions (MAFS) first suggested for solving elliptic problems and heat equations in domains with fixed boundaries. The one-dimensional problems in the plane and cylindrical geometries are considered. The numerical examples are presented and the results are compared with the analytical solutions. The comparison shows that the method presented provides a very high precision in determining the position of the moving boundary even for degenerate and singular problems when a region initially has zero thickness. The same technique was developed for 2D Stefan problems with completely or partially unknown boundary.     

Characterization of high refractive index semiconductor films by surface plasmon resonance

Si-based surface plasmon resonance (SPR) in the Kretschmann-Raether geometry is considered as a platform for the optical measurement of high refractive index films. The implementation of the SPR effect becomes possible due to the relatively high index of refraction of Si compared to most materials. As examples we study the SPR responses for some important semiconductor-based films, including laser-ablated porous silicon and thin germanium films. Using SPR data, we determine the refractive indices of these films for different parameters (thickness and porosity) and ambiences. We also discuss novel SPR biosensor architectures with the use of these solid films.     

Toward Low-Cost,High-Energy Density,and High-Power Density Lithium-Ion Batteries

Reducing cost and increasing energy density are two barriers for widespread application of lithium-ion batteries in electric vehicles. Although the cost of electric vehicle batteries has been reduced by ~70% from 2008 to 2015, the current battery pack cost ($268/kWh in 2015) is still >2 times what the USABC targets ($125/kWh). Even though many advancements in cell chemistry have been realized since the lithium-ion battery was first commercialized in 1991, few major breakthroughs have occurred in the past decade. Therefore, future cost reduction will rely on cell manufacturing and broader market acceptance. This article discusses three major aspects for cost reduction: (1) quality control to minimize scrap rate in cell manufacturing; (2) novel electrode processing and engineering to reduce processing cost and increase energy density and throughputs; and (3) material development and optimization for lithium-ion batteries with high-energy density. Insights on increasing energy and power densities of lithium-ion batteries are also addressed.     

Characterization of low-flammability electrolytes for lithium-ion batteries

In an effort to develop low-flammability electrolytes for a new generation of Li-ion batteries, we have evaluated physical and electrochemical properties of electrolytes with two novel phosphazene additives. We have studied performance quantities including conductivity, viscosity, flash point, and electrochemical window of electrolytes as well as formation of solid electrolyte interphase (SEI) films. In the course of study, the necessity for a simple method of SEI characterization was realized. Therefore, a new method and new criteria were developed and validated on 10 variations of electrolyte/electrode substrates. Based on the summation of determined physical and electrochemical properties of phosphazene-based electrolytes, one structure of phosphazene compound was found better than the other. This capability helps to direct our further synthetic work in phosphazene chemistry.