Investigation of the Reduction/Oxidation Behavior of Cobalt Supported on Nano-ceria

The oxidation and reduction behavior of cobalt catalysts supported on nano-ceria (5–8 nm) was investigated under hydrogen, oxygen and water atmospheres. A novel quantitative isothermal reduction (QIR) technique was introduced to analyze the kinetics and activation barrier of Co reduction. CoO to Co reduction was found to be of first order in the 250–350 °C temperature range. Temperature programmed reduction and oxidation experiments were conducted and the Kissinger method was used to obtain apparent activation energies for reduction and oxidation with O₂. The apparent activation energy for CoO reduction was found to agree with that obtained from the QIR technique. Re-oxidation of Co metal was found to have a slightly lower activation energy barrier than the reduction. The reduction and oxidation behavior was further investigated with in situ XANES where the reaction order for reduction was observed to change at 450 °C. The pre-reduced samples were seen to re-oxidize under a water atmosphere, where the oxidation followed first order kinetics. Re-oxidation by water yielded a higher activation energy when compared to re-oxidation under oxygen.     

A comparative study of AISC-360 and EC3 strength limit states

A study has been undertaken to evaluate the similarities and differences between the steel building design specifications used in the United States and Europe. Expressions for nominal strength presented in the AISC-360 Specification and the Eurocode 3 Specification were compared for fundamental limit states. In particular, rules for cross-section classification, tension members, compression members, I-shaped members subjected to flexure, I-shaped members subjected to shear, and fasteners were studied. Results of the investigation revealed that, in general, both specifications provide nominal capacities that are close to each other. Significant differences were reported for some limit states such as flexure in I-shaped members with non-compact flanges, shear and lateral torsional buckling in I-shaped members, and bearing strength at bolt holes. In this paper, the details of the comparative study are presented along with observations that are useful for practicing engineers.     

Electrokinetic and antibacterial properties of needle like‐TiO2/polyrhodanine core/shell hybrid nanostructures

The aim of this study was to fabricate needle like‐TiO₂/polyrhodanine nanostructures by polymerizing rhodanine monomer on the TiO₂ nanoparticles' surfaces and investigate their antibacterial activities. The structural, thermal, morphological, surface and electrical properties of non‐covalently functionalized nanoparticles were characterized by using FTIR, XPS, elemental analysis, TGA, XRD, SEM‐EDX, TEM, contact angle, and conductivity measurements. Characterization results confirmed the formation of needle like‐TiO₂/polyrhodanine (PRh) core/shell hybrid nanostructures. Alterations on the surface and electrokinetic properties of the materials were characterized by zeta (ζ)‐potential measurements with the presence of various salts and surfactants. The ζ‐potential of needle like‐TiO₂ was observed to increase from ?7.6 mV to +28.4 mV after forming a core/shell needle like‐TiO₂/PRh nanocomposite structure and with the presence of cetyltrimethyl ammonium bromide (CTAB) surfactant. Thereby colloidally more stable dispersions were formed. Antibacterial properties of needle like‐TiO₂/PRh were also tested against Staphylococcus aureus, Klebsiella pneumoniae, and Escherichia coli by various methods and they showed good antibacterial activity. The highest killing efficiency was determined for needle like‐TiO₂/PRh against E. coli by colony‐counting method as 0.95. TEM experiments also showed the immobilizations of the nanoparticles on E. coli and revealed the interactions between E. coli and the nanoparticles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41554.     

Effects and modelling of ultrasonic waste‐activated sludge disintegration

Sonication is a well‐known sludge pretreatment technique with the advantages of simple operation and high efficiency. However, it is an energy‐intensive process. Hence, it is very important to predetermine its sludge disintegration efficiency at varying pretreatment conditions in order to minimize the ultrasonic energy consumption. In this study, it was found that the ultrasonic sludge disintegration occurred in two stages: rapid and subsequent slow disintegration stages. For this reason, it was aimed to develop a simple and accurate mathematical model to describe the two‐stage sludge disintegration as a function of pretreatment conditions. Sludge concentration and ultrasonic density along with sonication period were involved in this model as independent variables. It was determined that the mathematical model can predict accurately the degree of sludge disintegration. Thus, the proposed model was seen to be very useful for evaluating the disintegration efficiency and/or for process design using the operating parameters under different conditions.     

k‐strong privacy for radio frequency identification authentication protocols based on physically unclonable functions

This paper examines Vaudenay's privacy model, which is one of the first and most complete privacy models that featured the notion of different privacy classes. We enhance this model by introducing two new generic adversary classes, k‐strong and k‐forward adversaries where the adversary is allowed to corrupt a tag at most k times. Moreover, we introduce an extended privacy definition that also covers all privacy classes of Vaudenay's model. In order to achieve highest privacy level, we study low cost primitives such as physically unclonable functions (PUFs). The common assumption of PUFs is that their physical structure is destroyed once tampered. This is an ideal assumption because the tamper resistance depends on the ability of the attacker and the quality of the PUF circuits. In this paper, we have weakened this assumption by introducing a new definition k‐resistant PUFs. k‐PUFs are tamper resistant against at most k attacks; that is, their physical structure remains still functional and correct until at most k^th physical attack. Furthermore, we prove that strong privacy can be achieved without public‐key cryptography using k PUF‐based authentication. We finally prove that our extended proposal achieves both reader authentication and k‐strong privacy. Copyright © 2014 John Wiley & Sons, Ltd.     

Flocculation of coal suspension with mono/dual polymer systems and contribution of Ca(II)/Mg(II) ions

In the experimental study carried out on mono-flocculation, anionic and especially non-ionic polymers strongly flocculated the coal suspension than cationic polymer. The dual-flocculation of the coal suspension with cationic and anionic polymer combination was also studied and the high performances of flocculation were also reached with dual-polymer approach. Furthermore, dual-polymer system required lower concentrations for the successful flocculation of coal particles. On the other hand, the pre-destabilization of the coal suspension with calcium and magnesium ions at particular pH and concentrations highly improved the flocculation of fine coal particles with these polymers.     

Effective electrodeposition of poly(3,4-ethylenedioxythiophene)-based organic coating on metallic food packaging for active corrosion protection

Journal of Applied Electrochemistry - Modern technologies continuously need special materials with specific properties to adopt the desired application. Recently, numerous researches have been...