Formation of chromium nitride layers on AISI 1010 steel by nitro-chromizing treatment

In this study, chromium nitride coating was realized on AISI 1010 steels by nitro-chromizing treatment. Steel samples were tufftrided at 575 °C for 2 h in the first step of the coating process, and then chromized by pack method in the powder mixture consisting of ferro-chromium, ammonium chloride and alumina at 1000 °C for 1-4 h. Samples were characterized by scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy, X-ray diffraction (XRD) analysis and Vickers micro-hardness tests. Coating layer formed on the steel samples is smooth and compact and well bonded to the steel matrix. The thickness of chromium nitride layer formed on the steel samples ranged from 5.16±1.48 to 13.45±1.73 μm, depending on the treatment time. The average micro-hardness value of the layer was 1789±59 HV_0.05. The layer consisted of Cr₂N and (Cr,Fe)₂N_(1−x) phases, according to XRD. EDS results showed that coating layer includes chromium and nitrogen.     

A design method for substrate integrated waveguide electromagnetic bandgap (SIW-EBG) filters

An efficient design method for substrate integrated waveguide electromagnetic bandgap (SIW-EBG) filters is proposed which provides direct dimensional synthesis approach for desired filter objectives without using network representations. The method is applied to the design of an X band SIW-EBG filter and its response is compared with HFSS (high frequency structure simulator) simulations for validation purposes. Fairly good agreement between the results shows the applicability of the proposed method for SIW-EBG filter design.     

A highly selective and sensitive benzothiazole‐based ‘turn‐on’ fluorescent sensor for Hg2+ ion

A simple benzothiazole‐based fluorescent probe (TDA) for the determination of Hg²⁺ ion in aqueous solutions was synthesised in one step and characterised by ¹H NMR, ¹³C NMR, APT, COSY, FTIR, and elemental analysis. TDA shows a significant fluorescence change upon the interaction of Hg²⁺ ion in DMF–water (v/v = 1/1), while only minor changes in fluorescence intensity are observed with 18 other metal ions. Fluorescence enhancement by a factor of 15 is achieved upon selective interaction with Hg²⁺ ion. The Hg²⁺ ion detection process is found to be pH dependent; therefore, TDA could be feasible within a pH range of 4.0–7.0.     

Heterogeneous integration through electrokinetic migration

We apply basic electrophoretic motion to semiconductor materials engineering for development of the next level of heterogeneous integration technology. Furthermore, we demonstrate the utility of these tools in integration of inorganic devices with biological species in order to explore the utility of these tools in biotechnological applications.Electrical and optical addressing techniques are shown to allow for more rapid and parallel patterning of biological species and inorganic objects     

DESORPTION OF ETHYL ACETATE-WATER MIXTURE BY USING CROSS-LINKED POLY(VINYLALCOHOL) MEMBRANE AND COMPARISON OF RESULTS WITH PERVAPORATION

In this study using poly(vinylalcohol) (PVOH) membranes cross-linked with tartaric acid (Tac) desorption experiments were performed for selected concentrations of binary ethyl acetate (EtAc)-water mixture at temperatures of 30°, 40°, and 50°C to determine sorption of components. Sorption values measured were compared with those estimated by the Flory-Huggins approach. Additionally, desorption results were compared with pervaporation results of another study in terms of solution-diffusion theory, and the effect of thermodynamic interactions on selective transport of the binary mixture and membrane system was investigated. The results obtained show that selective transport of EtAc-water mixture was influenced by increasing temperature and water content in the feed. It is shown that preferential sorption is more effective for pervaporation selectivity than diffusion selectivity.     

Physical and mechanical properties of Gokceada: Imbros (NE Aegean Sea) Island andesites

The physical and mechanical properties of the andesite forming much of the island of Gökçeada (Imbros), Turkey, were investigated using 54 mm samples cores from 12 blocks obtained from a quarry. The results were evaluated using regression analysis and good empirical relationships were obtained.     

Cost assessment of concrete and steel types for office buildings: An exploratory study

This paper presents a set of regression models which incorporates concrete and steel types in modeling the costs of office buildings. To these ends, three typical office buildings with seven and 15 stories have been designed by the help of a commercial software taking into account the Turkish practice. In each project C-16, C-20, C-25, C-30 and C-35 concrete classes and S-220 and S-420 steel types were used for dimensioning purposes. Rough construction costs were then calculated for different combinations of concrete classes and steel types. The findings of the study revealed that column dimensions decrease following an increase in a particular concrete class. However, this decrease stops after C-30. Furthermore, an average cost difference of 16% was observed between the steel types S-220 and S-420.     

Efficient multiframe Wiener restoration of blurred and noisy imagesequences

Computationally efficient multiframe Wiener filtering algorithms that account for both intraframe (spatial) and interframe (temporal) correlations are proposed for restoring image sequences that are degraded by both blur and noise. One is a general computationally efficient multiframe filter, the cross-correlated multiframe (CCMF) Wiener filter, which directly utilizes the power and cross power spectra of only NxN matrices, where N is the number of frames used in the restoration. In certain special cases the CCMF lends itself to a closed-form solution that does not involve any matrix inversion. A special case is the motion-compensated multiframe (MCMF) filter, where each frame is assumed to be a globally shifted version of the previous frame. In this case, the interframe correlations can be implicitly accounted for using the estimated motion information. Thus the MCMF filter requires neither explicit estimation of cross correlations among the frames nor matrix inversion. Performance and robustness results are given.     

Cost effect of earthquake region and soil type for office buildings in Turkey

In this study, the change in the load-bearing system cost of a reinforced concrete office building has been investigated in relation to the earthquake regions and soil types. Three different office projects each with five stories were investigated. The structural design calculations have been made according to four different soil types and four different earthquake regions. According to each combination, concrete, steel and formwork adopted approximations were calculated to reach the rough cost of each office building. The changes in the cost of projects according to the soil type and earthquake region were examined with multiple regression analysis and analysis of variance. In general, the change in cost has been observed around 22% between first and fourth soil type and 14% between first and fourth earthquake region.