Investigation of breakage behavior of different mineralogical and morphological characteristic pumices

The objective of this study is to analyze dry grinding behavior of four different pumices in terms of Bond grindability value, selection and breakage parameters values. For this purpose, firstly, Bond grindability test were made for four pumices. Then, eight different mono-size fractions for each of pumices were carried out between 1.7 and 0.106 mm formed by a \({\surd 2}\) sieve series, and ground batch wise in a laboratory ball mill for determination of breakage parameters. Finally, S _i and B _i,j equations were determined from the size distributions at different grinding times, and the model parameters (S _i , a _T , α, γ, β and \({\phi_{j}}\)) were compared for four different pumice samples.     

Phase Identification of La-Doped Hard Magnetic Barium Ferrite Using Artificial Neural Network

A model based on an artificial neural network (ANN) was designed for the simulation and estimation of 2 theta and intensity values obtained by X-Ray Diffraction (XRD) of pure and La-doped barium ferrite powders which have been synthesized in ammonium nitrate melt. Its performance is evaluated by the influences of different La content, sintering temperature, Fe/Ba ratio, and washed in HCl (or not washed in HCl) samples. The XRD patterns of samples estimated by the ANN agree well with the experimental values, indicating that the model is reliable and adequate.     

Synergistic effects of sono-alkaline pretreatment on anaerobic biodegradability of waste activated sludge

The individual and combined effects of alkaline and ultrasonic pretreatment on both physical and chemical properties and anaerobic biodegradability of waste activated sludge (WAS) were investigated comprehensively in this study. The experimental results showed that both disintegration and anaerobic biodegradability of WAS were significantly improved by the combination of alkaline and ultrasonic (sono-alkaline) pretreatment. Besides, it was determined that the hydraulic retention time in anaerobic digester can be shortened by half using this combined pretreatment. However, it was also determined that sono-alkaline pretreatment was not feasible economically due to its high energy requirement.     

Photoinduced Electron Transfer Between Pyridine Coated Cadmium Selenide Quantum Dots and Single Sheet Graphene

Interest in graphene as a two‐dimensional quantum‐well material for energy applications and nanoelectronics has increased exponentially in the last few years. The recent advances in large‐area single‐sheet fabrication of pristine graphene have opened unexplored avenues for expanding from nano‐ to meso‐scale applications. The relatively low level of absorptivity and the short lifetimes of excitons of single‐sheet graphene suggest that it needs to be coupled with light sensitizers in order to explore its feasibility for photonic applications, such as solar‐energy conversion. Red‐emitting CdSe quantum dots are employed for photosensitizing single‐sheet graphene with areas of several square centimeters. Pyridine coating of the quantum dots not only enhances their adhesion to the graphene surface, but also provides good electronic coupling between the CdSe and the two‐dimensional carbon allotrope. Illumination of the quantum dots led to injection of n‐carrier in the graphene phase. Time‐resolved spectroscopy reveals three modes of photoinduced electron transfer between the quantum dots and the graphene occurring in the femtosecond and picosecond time‐domains. Transient absorption spectra provide evidence for photoinduced hole‐shift from the CdSe to the pyridine ligands, thereby polarizing the surface of the quantum dots. That is, photoinduced electrical polarization, which favors the simultaneous electron transfer from the CdSe to the graphene phase. These mechanistic insights into the photoinduced interfacial charge transfer have a promising potential to serve as guidelines for the design and development of composites of graphene and inorganic nanomaterials for solar‐energy conversion applications.     

Three dimensional stress analysis of solid oxide fuel cell anode micro structure

One of the most common problems in solid oxide fuel cells (SOFCs) is the delamination and thus the degradation of electrode/electrolyte interface which occurs in the consequences of the stresses generated within the different layers of the cell. Nowadays, the modeling of this problem under certain conditions is one of the main issues for the researchers. The structural and thermo-physical properties of the cell materials (i.e. porosity, density, Young's modulus etc.) are usually assumed to be homogenous in the mathematical modeling of solid oxide fuel cells at macro-scale. However, during the real operation, the stresses created in the multiphase porous layers might be very different than those at macro-scale. Therefore, micro-level modeling is required for an accurate estimation of the real stresses and the performance of SOFCs. This study presents a microstructural characterization and a finite element analysis of the delamination and the degradation of porous solid oxide fuel cell anode and electrode/electrolyte interface under various operating temperatures, compressing forces and material compositions by using the synthetically generated microstructures. A multi physics computational package (COMSOL) is employed to calculate the Von Misses stresses in the anode microstructures. The maximum thermal stress in the electrode/electrolyte interface and three phase boundaries is found to exceed the yield strength at 900 °C while 800 °C is estimated as a critical temperature for the delamination and micro cracks due to thermal stress generated. The thermal stress decreases in the grain boundaries with increasing content of one of the phases (either Ni or YSZ) and the porosity of the electrode. A clamping load higher than 5 kg cm⁻² is also found to exceed the shear stress limit.     

Long‐term oropharyngeal colonization by C. albicans in children with cystic fibrosis

This longitudinal prospective study aimed to determine the prevalence of oropharyngeal colonization by C. albicans in children with cystic fibrosis (CF), and observe the continuity of candidal colonization and the changes in production of virulence factors, susceptibility to antifungal agents and RAPD patterns of the isolates. Thirty‐seven children with CF were followed‐up for oropharyngeal C. albicans colonization for 18 months. The colonization rate was detected in 54%. All isolates were susceptible to amphotericin B, but those isolated from one patient were resistant to fluconazole. Biofilm production, secretory acid proteinase, phospholipase and esterase activity rates were 30%, 60%, 75% and 80%, respectively. RAPD analysis with the primers OPE‐03 and OPE‐18 was performed for genotyping. RAPD patterns of the strains isolated from the same patient were related to each other, whereas they were not related with other strains isolated from different patients. Two C. albicans strains isolated from the same patient were found to be unrelated to one another. As a result, long‐lasting colonization of the oropharyngeal mucosa of children with CF by endogenous C. albicans isolates having the same RAPD pattern was demonstrated. Colonization prevalance and development of resistance to antifungal agents and the increased production of virulence factors were not correlated. Copyright © 2013 John Wiley & Sons, Ltd.     

Comparative Study of Bioactive Constituents in Turkish Olive Oils by LC-ESI/MS/MS

The purpose of this research was to evaluate and compare the differences in the phenolic composition, antioxidant properties, and fatty acids of virgin olive oils from the Ayvalik, Gemlik, and Memecik olive varieties cultivated in their respective growing areas over two harvest years. The phenolic composition of olive oils was carried out by liquid chromatography coupled with diode array detection and electrospray ionization mass spectrometry analysis and the fatty acid composition was determined by gas chromatography analysis. Fourteen phenolic compounds were identified and, among these, the most dominant were elenolic acid, tyrosol, and hydroxytyrosol. For olives from both years, the highest total phenolic content was determined in Memecik followed by Ayvalik and Gemlik. 2,2-diphenyl-1-picryl hydrazyl and 2,2′-azino-bis- (3-ethyl-benzothiazoline-6-sulphonic acid) methods were used to determine the antioxidant capacity of the olive oil extracts. In both methods, the antioxidant capacity values were higher for oil from cv. Ayvalik. Thirteen fatty acids were identified and quantified in all samples. Oleic acid was the highest concentration and this acid was more dominant in Gemlik oils.     

New current–mode special function continuous-time active filters employing only OTAs and OPAMPs

This paper reports three current mode second order filters, each of which realizes a specific function without any external passive elements. These filters realize low-pass notch (LPN), high-pass notch (HPN) and all-pass (AP) functions. Two OPAMPs, a double output OTA and a single output OTA are employed for each circuit. The filter structures can be easily cascaded since they have high output impedances. This property is especially useful for achieving high-order filters using these LPN and HPN filters as building blocks. The presented theory is verified with macro models in SPICE simulations and, using the SPICE parameters of the layout technology, post layout simulations are carried out, with parasitics extracted from the layouts of the filter chips.