Effects of oxidation and particle shape on critical volume fractions of silver‐coated copper powders in conductive adhesives for microelectronic applications

The effects of oxidation and particle shape on critical volume fractions of silver‐coated copper powders in conductive adhesives are investigated. Silver‐coated copper powders with spherical and flake‐shaped particles were oxidized at temperatures of 30°C, 175°C and 240°C for two hours and dispersed in an epoxy matrix. As silver‐coated copper powders are oxidized at 30°C and 175°C, the critical volume fractions of the conductive adhesives are slightly affected by oxidation and particle shape at these temperatures. As the oxidation temperature approaches 240°C, the critical volume fractions of the conductive adhesives are strongly affected by oxidation temperature and particle shape, owing to the formation of oxides such as Cu₂O on the surface of silver‐coated copper powder—Cu diffuses from the interior to the surface of silver‐coated copper powder and reacts with the oxygen in the air. Silver‐coated copper powder with flake‐shaped particles shows lower critical volume fractions in conductive adhesives than silver‐coated copper powder with spherically shaped particles. Polym. Eng. Sci. 44:2075–2082, 2004. © 2004 Society of Plastics Engineers.     

Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002     

The use of wood pulp and radiation‐modified starch in wastewater treatment

Radiation‐induced graft copolymerization of maize starch/acrylic acid has been performed. Also, natural byproduct wood pulp was used after chemical treatment for the removal of metal ions from the investigated wastewater. The surface and structure morphology of the wood pulp and starch/acrylic acid were investigated by scanning electron microscopy and infrared spectroscopy. The physical parameters, such as swelling, gel percentage, and grafting efficiency (%) of starch/acrylic acid copolymer, were studied. The factors affecting the abilities of the prepared materials for removing heavy metal ions and dyes from aqueous solutions were studied. It was found that the maximum metal uptake is in the following sequence: Fe³⁺ > Cr³⁺ > Pb²⁺ > Cd²⁺. The adsorption capacity of such investigated metal ions increases with the increase of pH values. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

以客户需求为导向的定制终端潜在客户挖掘模型研究

本文设计了以客户需求为导向的定制终端潜在客户挖掘模型,不仅要有效地挖掘出有换机需求的潜在客户,同时根据各类用户的特征,为其匹配相应价位的终端,并通过市场部门在第一时间向用户开展主动营销,提升终端销量及用户消费能力。     

Time optimization of ultraviolet–ozone pretreatment for improving wool fabrics properties

Wool fabrics were exposed to ultraviolet (UV)–ozone treatment for different periods. After exposure, the fabrics were analyzed by Fourior transform infrared spectroscopy (FTIR). Also, the crystallinity and amorphousity regions were followed by an X‐ray diffraction technique. The results were correlated by mechanical properties measurements. After a certain period of exposure, the dyeability and printability were improved because these abilities are strongly related to the percentage ratio of crystallinity regions to amorphousity regions in wool fabrics. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1469–1476, 2002     

Crystallization behavior of starch‐filled polypropylene

Starches of different granule sizes, including corn, rice, and amaranth starches, were used to prepare starch‐filled polypropylene (PP) and the effect of starch granule size on crystallization behavior PP was investigated. Differential scanning calorimetry and scanning electron microscopy were used to monitor the energy changes of the crystallization of the melt and to characterize the morphology of PP/starch composites, respectively. Little interaction was observed between starch and PP despite the difference in starch granule size. The crystallization temperature of PP decreased with the addition of starch and this decrease became more apparent with increasing starch granule size. During nonisothermal crystallization, the dependency of the relative degree of crystallinity on time was described by the Avrami equation. The addition of starch decreased the overall crystallization rate of PP, which was attributed to an increase in the activation energy of crystallization under nonisothermal conditions according to the Kissinger equation. An increase in starch granule size of starch would increase the crystallization activation energy of PP and consequently decrease its crystallization rate. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 484–492, 2004     

乳胶制品生产的工序能力分析及质量控制

本文分析了乳胶制品的生产过程，并对工序能力指数进行了分析，从而推断出产品的质量。     

Thermogravimetric analysis of methyl methacrylate‐graft‐natural rubber

The thermal degradations of methyl methacrylate‐graft‐natural rubber (MG) at different heating rates (B) in nitrogen were studied by thermogravimetric analysis. The results indicate that the thermal degradation of MG in nitrogen is a one‐step reaction. The degradation temperatures increase along with the increment of heating rates. The temperature of initial degradation (T₀) is 0.448B + 362.4°C, the temperature at maximum degradation rate, that is, the peak temperature on a differential thermogravimetric curve (T_p) is 0.545B + 380.7°C, and the temperature of final degradation (T_f) is 0.476B + 409.4°C. The degradation rate at T_p is not affected by B, and its average value is 48.9%; the degradation rate at T_f is not affected by B either, and its average value is 99.3%. The reaction order (n) is 2.1 and is not affected by B. The reaction activation energy (E) and the frequency factor (A) increase along with B, and the apparent reaction activation energy (E₀) is 254.6 kJ/mol. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2952–2955, 2002     

Foams based on low density polyethylene/hectorite nanocomposites: Thermal stability and thermo‐mechanical properties

Novel polymer nanocomposite foams made by a two step compression molding method are analyzed in this article. Nanocomposites of low density polyethylene and an organo‐modified hectorite were first melt compounded and then foamed using a compression molding method. To study the influence of the presence and the amount of hectorite in both mechanical and thermal properties, samples with 3% and 7% content of hectorite were prepared. Polyethylene crystalline characteristics and thermal stability of the samples were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Mechanical properties of foams and solid nanocomposites were analyzed by using dynamical mechanical analysis (DMA). Thermal expansion of the samples was analyzed by thermomechanical analysis. The results indicate that the exfoliation of hectorite platelets was achieved after the foaming process, but not during the melt mixing step. Foams with hectorite nanoparticles exhibit improved thermal stability and mechanical properties when compared with neat polymeric foams. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006