Advanced photospacers with elastic recovery

A new series of photospacers has been prepared with different types of crosslinkers to improve elastic recovery. Afunctional crosslinker with six reactive groups demonstrates the best elastic recovery. As the quantity of crosslinker is increased, the elastic recovery also increases, probably due to an increase in the crosslinking density. The use of ADMS EPS® results in high resolution, good uniformity, and high production yield in the liquid‐crystal‐display (LCD) process. Especially, EPS® improves and solves problems such as viewing angle, crosstalk, and dark spots.     

Preliminary announcement of an 85 percent efficient reflector antenna

This communication is our preliminary announcement and claim for achievement of 85 percent aperture efficiency using a dual reflector antenna. We are aware of no other reflector antenna having such aperture efficiency, and we invite the antenna community to comment, critique, or inform us of equal or better claims. A full report will be forthcoming; this brief note will supply only pertinent highlights.     

Optical implementation of the hopfield neural network with matrix gratings

We propose a new method for the optical implementation of the Hopfield neural network with a universal tool. The tool is a matrix grating constituted with a group of element gratings. The algorithms for designing a matrix grating are proposed, and a matrix grating is created to execute recognition experiments by use of the Hopfield neural network. The experimental results demonstrate that the proposed method performs well. The stability of the light efficiencies of different optical components used in optical networks is also considered.     

A fracture criterion for three-dimensional crack problems

A criterion for predicting the growth of three-dimensional cracks is developed on the basis of the strain energy density concept which has been used successfully for treating two-dimensional crack problems. Fracture is assumed to initiate from the nearest neighbor element located by a set of spherical coordinates (r, θ, φ) attached to the crack border. The new fracture surface is described by a locus of these elements whose locations correspond to the strain energy function, dW/dV, being a minimum. The function dW/dV is found to be singular of the type 1/r and is of quadratic form in the three stress intensity factors k₁, k₂ and k₃ expressed through the strain energy density factor S. It is postulated that unstable crack propagation initiates from a region where S reaches a critical value S_cr = r₀(dW/dV)_cr. The locations of failure lying on the fracture surface is determined by holding (dW/dV)_cr = S_min/r₀ constant. The quantity S_min stands for the value of S minimized with respect to θ and φ and r₀ is a radial distance measured from the crack border.

An example of failure prediction for an embedded elliptical crack subjected to both normal and shear loads is presented. According to the S-criterion, fracture initiation takes place at the ends of the minor axis. An unexpected result is that for a narrow elliptical crack and Poisson's ratio of 1/3 the lowest failure load occurs when the uniaxial tensile load makes an angle of approximately 60° with the crack surface and is in the plane of the major axis. This is in contrast to the expectation that the lowest critical load occurs when the uniaxial tension is perpendicular to the crack surface. In the limit as the elliptical crack becomes increasingly narrower, the result reduces to the two dimensional line crack case of Mode I and III loading. The S-criterion is also applied to the failure prediction of three dimensional cracks under compressive loads.     

A 2.4-GHz Low-Power Low-IF Receiver and Direct-Conversion Transmitter in 0.18-μm CMOS for IEEE 802.15.4 WPAN Applications

In this paper, a low-power low-IF receiver and a direct-conversion transmitter (DCT) suitable for the IEEE standard 802.15.4 radio system at the 2.4-GHz band are presented in 0.18-mum deep n-well CMOS technology. By using vertical NPN (V-NPN) bipolar junction transistors in the baseband analog circuits of the low-IF receiver, the image rejection performance is improved and the power consumption is reduced. In addition, by applying the V-NPN current mirrored technique in a DCT, the carrier leakage is reduced and the linearity performance is improved. The receiver has 10 dB of noise figure, -15 dBm of third-order input intercept point, and 35 dBc of image rejection. The transmitter has more than -2 dBm of transmit output power, -35 dBc of local oscillator leakage, and -46 dBc of the transmit third harmonic component. The receiver and transmitter dissipate 6 and 9 mA from a 1.8-V supply, respectively     

Optimized microwave dielectric properties of Co- and Ca-substituted Mg0.6Zn0.4TiO3

The system of (1 − y)(Mg_0.6Zn_0.4)_1−xCo_xTiO₃-yCaTiO₃ was investigated to optimize its microwave dielectric properties by adopting appropriate contents of Co and Ca and by controlling sintering conditions. The effect of Co substitution was to enhance densification and Qf value, while the addition of CaTiO₃ resulted in increases of dielectric constant and TCF. As an optimal compositions, 0.93(Mg_0.6Zn_0.4)_0.95Co_0.05TiO₃-0.07CaTiO₃ successfully demonstrated a dielectric constant of 23.04, a Qf of 79,460 GHz and a TCF value of +1.4 ppm/°C after firing at a relatively lower sintering temperature of 1200 °C. The increase of sintering temperature beyond 1200 °C tended to degrade overall microwave dielectric properties presumably due to Zn volatilization as evidenced by the presence of a Zn-deficient phase (MgTi₂O₅) at 1400 °C. An attempt to establish the correlation between microstructure characteristics and dielectric properties was made in this dielectric system where the extensive range of firing temperature up to 1400 °C was evaluated.     

Embracing transformational leadership: Team values and the impact of leader behavior on team performance.

The authors investigated the relationship between transformational leadership behavior and group performance in 218 financial services teams that were branches of a bank in Hong Kong and the United States. Transformational leadership influenced team performance through the mediating effect of team potency. The effect of transformational leadership on team potency was moderated by team power distance and team collectivism, such that higher power distance teams and more collectivistic teams exhibited stronger positive effects of transformational leadership on team potency. The model was supported by data in both Hong Kong and the United States, which suggests a convergence in how teams function in the East and West and highlights the importance of team values. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

The organization and animal-vegetal asymmetry of cytokeratin filaments in stage VI Xenopus oocytes is dependent upon F-actin and microtubules

Confocal immunofluorescence microscopy with anti-cytokeratin antibodies revealed a continuous and polarized network of cytokeratin (CK) filaments in the cortex of stage VI Xenopus oocytes. In the animal cortex, CK filaments formed a dense meshwork that both was thicker and exhibited a finer mesh than the network of CK filaments previously observed in the vegetal cortex (Klymkowsky et al., 1987). CK filaments first appeared in association with germinal vesicle (GV) and mitochondrial mass (MM) of oocytes in early mid stage I, indicating that CK filaments are the last of the three cytoskeletal networks to be assembled. By late stage I, CK filaments formed complex networks surrounding the GV, surrounding and penetrating the MM, and linking these networks to a meshwork of CK filaments in the oocyte cortex. During stage III-early IV, CK filaments formed a highly interconnected, apparently unpolarized, radial array linking the perinuclear and cortical CK filament networks. Polarization of the CK filament network was observed during mid stage IV-stage V, as first the animal, then the vegetal CK filament networks adopted the organization characteristic of stage VI oocytes. Treatment of stage VI oocytes with cytochalasin B disrupted the organization of both cortical and cytoplasmic CK filaments, releasing CK filaments from the oocyte cortex and inducing formation of numerous cytoplasmic CK filament aggregates. CB also disrupted the organization of cytoplasmic microtubules (MTs) in stage VI oocytes. Disassembly of oocyte MTs with nocodazole resulted in loss of the characteristic A-V polarity of the cortical CK filament network. In contrast, disruption of cytoplasmic CK filaments by microinjection of anti-CK antibodies had no apparent effect on cytoplasmic or MT organization. We propose a model in which the organization and polarization of the cortical network of CK filaments in stage VI Xenopus oocytes are dependent upon a hierarchy of interactions with actin filaments and microtubules.