Electrooxidation of alcohols at a nickel oxide/multi-walled carbon nanotube-modified glassy carbon electrode

Electrocatalytic oxidation of methanol and some other primary alcohols on a glassy carbon electrode modified with multi-walled carbon nanotubes and nano-sized nickel oxide (GCE/MWNT/NiO) was investigated by cyclic voltammetry and chronoamperometry in alkaline medium. The results were compared with those obtained on a nickel oxide-modified glassy carbon electrode (GCE/NiO). Both the electrodes were conditioned by potential cycling in the range of 0.1–0.6 V versus Ag/AgCl in a 0.10 M NaOH solution. The effects of various parameters such as scan rate, alcohol concentration, thickness of NiO film, and real surface area of the modified electrodes were also investigated and compared. It was found that the GCE/MWNT/NiO-modified electrode possesses an improved electrochemical behavior over the GC/NiO-modified electrode for methanol oxidation.     

Accuracy enhancement of thermal dispersion model in prediction of convective heat transfer for nanofluids considering the effects of particle migration

A thermal dispersion model is utilized for simulation of convective heat transfer of water-TiO₂ nanofluid for laminar flow in circular tube. Concentration distribution at cross section of the tube was obtained considering the effects of particle migration, and this concentration distribution was applied in the numerical solution. Numerical solution was done at Reynolds numbers of 500 to 2000 and mean concentrations of 0.5 to 3%. Meanwhile, an experimental study was conducted to investigate the accuracy of the results obtained from the numerical solution. Non-uniformity of the concentration distribution increases with raising mean concentration and Reynolds number. Thereby, for mean concentration of 3%, at Reynolds numbers of 500 and 2000, the concentration from wall to center of the tube increases 2.6 and 30.9%, respectively. In the dispersion model, application of non-uniform concentration distribution improves the accuracy in prediction of the convective heat transfer coefficient in comparison with applying uniform concentration.     

Synthesis and characterization of modified ZSM-5 nanozeolite and their applications in adsorption of Acridine Orange dye from aqueous solution

In this research, a novel method was reported for the synthesis of ZSM-5 nanozeolite. The ZSM-5 nanozeolite was modified by transition metals such as nickel, copper and iron. These nanozeolites were characterized using X-ray diffraction, scanning electronic microscopy, Fourier transform infrared and Energy-dispersive X-ray techniques. The synthesized Fe-ZSM-5 nanozeolite has been smaller average particle size than the other nanozeolites. Adsorption behavior of Acridine Orange (AO) onto nanozeolites has been studied in an aqueous medium using UV–VIS technique. The modified nanozeolites have more adsorption efficiency compared to the unmodified ZSM-5 nanozeolite for AO removal. Also, Fe-ZSM-5 nanozeolite was shown higher adsorption efficiency of AO than the other synthesized nanozeolites. Adsorption isotherms were fitted with the Langmuir, Freundlich and D–R models. The kinetic data were investigated using pseudo-first order and pseudo-second order models. The adsorption kinetics of AO on Fe-ZSM-5 nanozeolitewell matched with pseudo-second order kinetic model.     

Morphology of polymer wear debris resulting from different contact conditions

An investigation into the wear process of five polymers tested under different contact conditions is presented. Polymer pin on metal plate and metal pin on polymer plate configurations were used. The metal pin on polymer plate configuration gave significantly lower wear rates compared to that observed for the polymer pin on metal plate configuration. The results are discussed in terms of morphology of wear debris generated.     

Controlled release of prednisolone acetate from molecularly imprinted hydrogel contact lenses

The aim of this work was to study the influence of methacrylic acid (MAA) as a comonomer and the application of a molecular imprinting technique on the loading and release properties of weakly crosslinked 2‐hydroxyethyl methacrylate (HEMA) hydrogels, with a view toward their use as reloadable soft contact lenses for the administration of prednisolone acetate (PA). The hydrogels were prepared with HEMA (95.90–98.30 mol %) as a backbone monomer, ethylene glycol dimethacrylate (140 mM) as a crosslinker, and MAA (0, 50, 100, or 200 mM) as a functional monomer. Different PA/MAA molar ratios (0, 1 : 8, 1 : 6, and 1 : 4) in the feed composition of the hydrogels were also applied to study the influence of the molecular imprinting technique on their binding properties. The hydrogels (0.4 mm thick) were synthesized by thermal polymerization at 60°C for 24 h in a polypropylene mold. The hydrogels were then characterized by the determination of their swelling and binding properties in water. Their loading and release properties were also studied in 0.9% NaCl and artificial lachrymal fluid. Increasing the MAA content of the hydrogel and applying the molecular imprinting technique led to an increase in the loading capacity of the hydrogel. The optimized imprinted hydrogel showed the highest affinity for PA and the greatest ability to control the release process, sustaining it for 48 h. The results obtained clearly indicate that the incorporation of MAA as a comonomer increased the PA loading capacity of hydrogel. Our data showed that the molecular imprinting technique also had a significant effect on the loading and release properties of the hydrogels. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Properties of PET/clay nanocomposite films

Polyethylene terephthalate (PET) nanocomposite films were prepared by cast extrusion followed by uniaxial stretching, using chill rolls. Transmission electron microscopy (TEM) and wide angle X‐ray diffraction (WAXD) showed that the clay layers were aligned in the machine direction (MD) in the PET/clay nanocomposite (PCN) films. Differential scanning calorimetry (DSC) showed that PCN films have higher crystallinity than the neat PET films, possibly due to the nucleating role of the silicate layers. The PCN films became hazier as the clay content increased, but the film transparency remained in the acceptable range. Oxygen permeability of the PCN films decreased by 23% compared to the neat PET film. This is comparable with predictions of models proposed in the literature. Silicate incorporation brought about 20% increase in the tensile modulus, while the puncture and tear propagation resistance were reduced, due to brittleness of the PCN films. The measured modulus (1.7 GPa) was somewhat smaller than the values predicted using the Pseudoinclusion model (2.1 GPa). POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Temperature/pH/magnetic triple‐sensitive nanogel–hydrogel nanocomposite for release of anticancer drug

Hydrogels, nanogels and nanocomposites show increasing potential for application in drug delivery systems due to their good chemical and physical properties. Therefore, we were encouraged to combine them to produce a new compound with unique properties for a long‐term drug release system. In this regard, the design and application of a nanocomposite hydrogel containing entrapped nanogel for drug delivery are demonstrated. To this aim, we first prepared an iron oxide nanocomposite nanogel based on poly(N‐isopropylacrylamide)‐co‐((2‐dimethylaminoethyl) methacrylate) (PNIPAM‐co‐PDMA) grafted onto sodium alginate (NaAlg) as a biocompatible polymer and iron oxide nanoparticles (ION) as nanometric base (PND/ION‐NG). This was then added into a solution of PDMA grafted onto NaAlg. Through dropwise addition of mixed aqueous solution of iron salts into the prepared polymeric solution, a novel hydrogel nanocomposite with excellent pH, thermal and magnetic responsivity was fabricated. The synthesized samples were fully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy with energy‐dispersive X‐ray analysis, vibrating sample magnetometry and atomic force microscopy. A mechanism for the formation of PNIPAM‐co‐PDMA/NaAlg‐ION nanogel–PDMA/NaAlg‐ION hydrogel and PND/ION nanogel is suggested. Swelling capacity was measured at various temperatures (25 to 45 °C), pH values (from 2 to 11) and magnetic field and under load (0.3 psi) and the dependence of swelling properties of the nanogel–hydrogel nanocomposite on these factors was well demonstrated. The release rate of doxorubicin hydrochloride (DOX) as an anticancer drug was studied at different pH values and temperatures in the presence and absence of a magnetic field. The results showed that these factors have a high impact on drug release from this nanocomposite. The result showed that DOX release could be sustained for up to 12.5 days from these nanocomposite hydrogels, significantly longer than that achievable using the constituent hydrogel or nanogel alone (<1 day). The results indicated that the nanogel–hydrogel nanocomposite can serve as a novel nanocarrier for anticancer drug delivery. © 2019 Society of Chemical Industry     

Mechanical and high velocity impact performance of a hybrid long carbon/glass fiber/polypropylene thermoplastic composite

This research explores mechanical and high velocity impact response of hybrid long carbon/glass fiber-reinforced polypropylene thermoplastic composites (HLFT) with different fiber lengths. The work examines three hybrid long fiber thermoplastic composites, i.e., 5, 10 and 20 mm. The HLFTs were prepared by a combination of extrusion and pultrusion processes and using a cross-head die. Tensile and Izod impact tests were carried out to evaluate the mechanical performance of each HLFT compound. A gas gun with a spherical projectile was used to conduct high velocity impact tests at three velocities of 144, 205 and 240 m/s. The results showed that internal mixing operation caused extensive reduction in fiber length of all three LFT lengths. Tensile strength, modulus and Izod impact test results were the indications of higher values with increase in HLFT length. Comparison of these results for the HLFT with that of corresponding glass/PP LFTs, adopted from earlier work by Shayan Asenjan et al. (J Compos Mater 53:353–360, 2019), showed better performance of HLFT. The high velocity impact results showed a steady higher impact performance with the increase in HFLT fiber length for all impact velocities tested. Comparison of HLFT high velocity impact performance revealed better results for all impact velocities tested with that of the corresponding glass/PP LFT composite.     

Microscopic and macroscopic atomization characteristics of a pressure-swirl atomizer,injecting a viscous fuel oil

Combustion of heavy fuels is one of the main sources of greenhouse gases, particulate emissions, ashes, NOxand SOx. Gasification is an advanced and environmentally friendly process that generates combustible and clean gas products such as hydrogen. Some entrained flow gasifiers operate with Heavy Fuel Oil(HFO) feedstock. In this application, HFO atomization is very important in determining the performance and efficiency of the gasifiers.The atomization characteristics of HFO(Mazut) discharging from a pressure-swirl atomizer(PSA) are studied for different pressures difference(Δp) and temperatures in the atmospheric ambient. The investigated parameters include atomizer mass flow rate( _m), discharge coefficient(CD), spray cone angle(θ), breakup length(Lb), the unstable wavelength of undulations on the liquid sheet(λs), global and local SMD(sauter mean diameter) and size distribution of droplets. The characteristics of Mazut sheet breakup are deduced from the shadowgraph technique. The experiments on Mazut film breakup were compared with the predictions obtained from the liquid film breakup model. Validity of the theory for predicting maximum unstable wavelength was investigated for HFO(as a highly viscous liquid). A modification on the formulation of maximum unstable wavelength was presented for HFO. SMD decreases by getting far from the atomizer. The measurement for SMD and θ were compared with the available correlations. The comparisons of the available correlations with the measurements of SMD andθ show a good agreement for Ballester and Varde correlations, respectively. The results show that the experimental sizing data could be presented by Rosin-Rammler distributions very well at different pressure difference and temperatures.