Effect of process variables on product yield distribution in thermal catalytic cracking of naphtha to light olefins over Fe/HZSM-5

The effect of temperature, WHSV and Fe loading over HZSM-5 catalyst in thermal-catalytic cracking (TCC) of naphtha for the production of light olefins has been studied. The response surface defined by three most significant parameters is obtained from Box-Behnken design method and the optimal parameter set is found. The results show that ethylene increases with temperature, while propylene shows an optimum at 650 °C. Moderate WHSV is favorable for maximum production of light olefins. Addition of Fe to HZSM-5 has a favorable effect on the production of light olefins up to 6% of loading. Excess amount of loading decreases the conversion of naphtha, which leads to a drop in light olefin yields. The yield of light olefins (ethylene and propylene) at 670 °C, 44 hr⁻¹ and 6 wt% Fe has been increased to 5.43 wt% compared to the unmodified HZSM-5 and reaches to 42.47 wt%.     

Using weighted pseudo‐inverse method for reconstruction of reflectance spectra and analyzing the dataset in terms of normality

Most of spectral estimation methods are based on improving the learning‐based procedures which mainly modify the training sets used by the basic methods. In this article, a new method is developed for analyzing of superiority of these modified processes to the basic methods in terms of normality of datasets. Hence, two qualitative terms, named generality and similarity are introduced to interpret the recovery achievements of different databases and their roles as training and testing sets. Also, a simple technique based on dataset modification of pseudo‐inverse method is introduced for the recovery of reflectance spectra of samples from their corresponding colorimetric data. The method modifies the training dataset according to the color specifications of test sample. In fact, different weighting matrices are employed as dynamic modifiers to improve the pseudo‐inverse estimation as a simple recovery method. The employed datasets are examined in the self as well as cross test conditions and the results are spectrally and colorimetrically evaluated. The root mean square errors between the reconstructed and actual spectra along with the corresponding color difference values under different illuminants decrease by employing the suggested modification method in comparison to classical pseudo‐inverse technique as well as the recently improved version named optimized adaptive Wiener method. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

Detection of arsenic agents by polyhydroxamic acid

Arsenic agents are among the most destructive and fatal factors that exist in the environment, chemical agents, medicines, toxics, pesticides, etc., and working with these compounds is too limited and difficult due to their high toxicity. These deadly, dangerous, and weakening toxins are consumed for a large variety of purposes in the military industries. So measurement and identification of them are of great necessity. In this research work, acryl carbohydroxamic acid monomer was first prepared from acrylamide and then polymerized under radical conditions in the presence of azobisisobutyronitrile as an initiator. The produced polyhydroxamic acid (PHA) has antibacterial and anticancer properties as well as high complex‐forming properties with transition elements. By using the chelating properties of PHA, we took steps to identify arsenic agents such as trichloroarsine, dichloroethylarsine, and lewisites (I, II, III). This polymer, possessing unique properties, measures well the arsenic of low concentrations, lower than 10 ppm, existing in the samples within a very short time (a few seconds). We will also be able to perform qualitative assessments on it through instrumental methods or titration, if required. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Aliphatic polyurethane–montmorillonite nanocomposite coatings: Preparation,characterization, and anticorrosive properties

Polyurethane (PU)–clay nanocomposite coatings were prepared by a sonication method. The stability and morphology of these coatings was characterized by turbidometry, X‐ray diffraction, and transmission electron microscopy. The anticorrosive properties of these coatings were investigated by salt‐spray and electrochemical impedance spectroscopy methods. According to the results, dispersed nanoclay layers in the matrix of the nanocomposite coating compositions led to superior anticorrosive characteristics compared to those of pure PU coatings. The best results were obtained with coatings containing about 5 wt % clay. The resistance of the coating containing 5% clay was about 9.002 GΩ after 225 days of immersion in a 3.5 wt % NaCl solution, whereas it was only 97 kΩ for the pure PU coating. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of a Series of PEG-Based ABA Triblock Copolymers and Their Influence on Rheology of Cement Slurries

A series of water-soluble ABA triblock copolymers consisting of a polyethylene glycol central block joined to two blocks of six different homopolymers have been synthesized via simple solvent-free and ecofriendly routes and characterized by FTIR and ¹HNMR spectroscopy. Dispersing and slump-retaining abilities of the copolymers in cement slurries were evaluated by mini-slump spread method. Rheological measurements of samples with the best performance were carried out using a rate-controlled coaxial cylinder viscometer. The test results indicate that the dispersing power of the copolymers in cement pastes is strongly affected by the structure and degree of polymerization of the monomers.     

Thin-film nanofiltration membrane with monomers of 1,2,4,5-benzene tetracarbonyl chloride and ethylene diamine on electrospun support: preparation,morphology and chlorine resistance properties

Polymer Bulletin - Novel polyimide nanofiltration membranes were prepared by interfacial polymerization using 1,2,4,5-benzene tetracarbonyl chloride (BTC) and trimesoyl chloride solution in...     

Synthesis of biocompatible and degradable microspheres based on 2‐hydroxyethyl methacrylate via microfluidic method

Monodisperse poly(2‐hydroxyethyl methacrylate), p‐HEMA, microspheres in size ranging from 16 to 340 (μm) were synthesized by in situ emulsion photopolymerization of HEMA monomer with polyethylene glycol diacrylate (p‐EGDA) by means of a three‐dimensional microfluidic flow‐focusing device. An aqueous solution of HEMA, p‐EGDA as chain extender and UV‐photoinitiator serving as dispersed phase formed microdroplets in a continuous oil phase mainly consisting of n‐heptane. A downward coaxial orifices design in the device led to confinement of the reaction admixtures thread to central axis of the microchannels. This design strategy could solve the wetting problem of dispersed phase with the microchannels leading to a successful production of monodisperse microspheres with size variation of less than 4%. The effects of concentration of p‐EGDA, surfactant, and flow rate ratios on microsphere size were examined. It was observed that increasing the concentration of p‐EGDA slightly increases the size whereas increasing the flow rate ratios of continuous to dispersed phase effectively decreases the size of microspheres. The rapid continuous synthesis of p‐HEMA based microspheres via the microfluidic route with reliable control over size, size distribution, and composition opens new doors for mass production of biocompatible and degradable polymeric microspheres for enormous biotechnological applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40925.     

Mortality response of folate receptor-activated,PEG–functionalized TiO2 nanoparticles for doxorubicin loading with and without ultraviolet irradiation

TiO₂ nanoparticles (NPs) were synthesized by hydrothermal assisted sol–gel technique. In the next step, as-synthesized NPs were modified by poly ethylene glycol (PEG). Then, folic acid (FA) was conjugated to TiO₂–PEG. Finally, Doxorubicin (Dox) as an anticancer drug was loaded on as-prepared TiO₂–PEG–FA nanocarrier. The optimization of TiO₂ and FA concentration and the influence of ultraviolet (UV) irradiation on photocatalytic activity of nanocarrier and Dox loaded carrier were assessed by utilizing the 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT)-assay method.     

Influence of Ni/Co binders and Mo2C on the microstructure evolution and mechanical properties of (Ti0.93W0.07)C–based cermets

In this research, solid–solution powder of (Ti_0.93W_0.07)C was synthesized by high–energy ball mill method followed by carbothermal reduction process. Subsequently, the acquired powder was blended with Ni/Co and Mo₂C secondary carbide, and sintered under the optimized temperature (1510?°C) for 1?h to produce the modulated cermets. A typical core–rim structure formation with solid–solution phases was confirmed by backscattered electrons studies using a Field Emission electron scanning microscope. The hardness of the synthesized cermets was enhanced by increasing the specific amount of Mo₂C. The acquired results demonstrate that the binder type has a prominent influence on the microstructure and hardness of the prepared cermets. The hardness of (Ti_0.93W_0.07)C–xMo₂C–Ni cermet increased ~ 9%, when nickel was partially substituted by cobalt.