Epoxy‐montmorillonite clay nanocomposites: Synthesis and characterization

Nanocomposites of epoxy resin with montmorillonite clay were synthesized by swelling of different proportions of the clay in a diglycidyl ether of bisphenol‐A followed by in situ polymerization with aromatic diamine as a curing agent. The montmorillonite was modified with octadecylamine and made organophilic. The organoclay was found to be intercalated easily by incorporation of the epoxy precursor and the clay galleries were simultaneously expanded. However, Na‐montmorillonite clay could not be intercalated during the mixing or through the curing process. Curing temperature was found to provide a balance between the reaction rate of the epoxy precursor and the diffusion rate of the curing agent into the clay galleries. The cure kinetics were studied by differential scanning calorimetry. The exfoliation behavior of the organoclay system was investigated by X‐ray diffraction. Thermogravimetric analysis was used to determine the thermal stability, which was correlated with the ionic exchange between the organic species and the silicate layers. The morphology of the nanocomposites was evaluated by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2201–2210, 2004     

Coupled effect of time and temperature on variations of yield value of highly flowable mortar

In order to enhance the performance of self-consolidating concrete, it is important to have a better understanding of the rheological behavior of the material. The initial rheological parameters and their variations with time are closely affected by material temperature, type and dosage of high range water-reducing admixture (HRWRA), and elapsed time. This paper presents the results of an investigation aimed at evaluating the coupled influence of time and temperature on the variations of yield value with time of mortars made with two types of HRWRA: polynaphtalene sulfonate and polycarboxylate polymer. Four mortars extracted from self-consolidating concrete mixtures proportioned with various binder types and with water-to-binder ratios of 0.42 and 0.53 were prepared at 10 to 30 °C.Test results show that the yield value varies linearly with the coupled effect of time and temperature during the dormant period for mixtures made with polynaphtalene sulfonate-based HRWRA. However, such changes are found to depend on the mixture temperature for mixtures made with polycarboxylate-based HRWRA, which can influence the dispersion efficiency of the polycarboxylate polymer. The threshold temperature of mixtures made with PCP-HRWRA is shown to vary with mixture composition. Below a given threshold temperature, the mortar exhibits a considerable degree of retention or even reduction in yield value over 30% of the dormant period. A sharp increase in yield value is observed beyond 30% of the dormant period. Above this threshold temperature, the yield value is shown to increase linearly with time.     

Lignan contents in sesame seeds and products

Sesame seed (Sesamum indicum L.) is a rich source of furofuran lignans with a wide range of potential biological activities. The major lignans in sesame seeds are the oil‐soluble sesamin and sesamolin, as well as glucosides of sesaminol and sesamolinol that reside in the defatted sesame flour. Upon refining of sesame oil, acid‐catalyzed transformation of sesamin to episesamin and of sesamolin to epimeric sesaminols takes place, making the profile of refined sesame oils different from that of virgin oils. In this study, the total lignan content of 14 sesame seeds ranged between 405 and 1178 mg/100 g and the total lignan content in 14 different products, including tahini, ranged between 11 and 763 mg/100 g. The content of sesamin and sesamolin in ten commercial virgin and roasted sesame oils was in the range of 444–1601 mg/100 g oil. In five refined sesame oils, sesamin ranged between 118 and 401 mg/100 g seed, episesamin between 12 and 206 mg/100 g seed, and the total contents of sesaminol epimers between 5 and 35 mg/100 g seed, and no sesamolin was found. Thus, there is a great variation in the types and amounts of lignans in sesame seeds, seed products and oils. This knowledge is important for nutritionists working on resolving the connection between diet and health. Since the consumption of sesame seed products is increasing steadily in Europe and USA, it is important to include sesame seed lignans in databases and studies pertinent to the nutritional significance of antioxidants and phytoestrogens. It is also important to differentiate between virgin, roasted and refined sesame oils.     

An overlapping domain decomposition dual reciprocity method

We present a domain decomposition boundary integral equation method for two-dimensional partial differential equations. The overlapping Schwarz method is employed to improve the dual reciprocity boundary element method. The resulting algorithm turns out to be more accurate than a non-overlapping approach previously proposed. Some numerical results showing the improved accuracy and efficiency of the methods are given.     

Laminar flame speeds and extinction limits of conventional and alternative jet fuels

Experimental results of laminar flame speeds and extinction stretch rates for the conventional (Jet-A) and alternative (S-8) jet fuels are acquired and compared to the results from our earlier studies for neat hydrocarbon surrogate components, including n-decane and n-dodecane. Specifically, atmospheric pressure laminar flame speeds are measured using a counterflow twin-flame configuration for Jet-A/O₂/N₂ and S-8/O₂/N₂ mixtures at preheat temperatures of 400, 450, and 470 K and equivalence ratios ranging from 0.7 to 1.4. The flow field is recorded using digital particle image velocimetry. Linear extrapolation is then applied to determine the unstretched laminar flame speed. Experimental data for the extinction stretch rates of the nitrogen diluted jet fuel/oxidizer mixtures as a function of equivalence ratio are also obtained. In addition, the experimental data of Jet-A are compared to the computed values using a chemical kinetic mechanism for a kerosene surrogate reported in literature. A sensitivity analysis is further performed to identify the key reactions affecting the laminar flame speed and extinction stretch rate for this kerosene surrogate.     

Possible origin of ferromagnetism in antiferromagnetic orthorhombic-YFeO3: A first-principles study

Rare-earth orthoferrites (RFeO₃) are well-known for the antiferromagnetic ground state. However, some of the recent experimental results suggest that the few members of RFeO₃ family possess ferromagnetism. In the present investigation we report the possible origin of ferromagnetism in antiferromagnetic YFeO₃ using density functional theory. For this purpose, we have considered pure as well as self-doping in YFeO₃ i.e. by considering the point defect at Y, Fe and O sites. Our finding suggests that the point defects in YFeO₃ results in the mixed-valence state of Fe, which may result in ferromagnetism through Zener double exchange mechanism.     

Morphological modeling of polymer solidification

A physical model of semicrystalline polymer solidification is proposed, along with an outline of general theoretical aspects of morphological modeling. Computational modeling, based on the proposed envelop evolution equation associated with a primary nucleation model and the elastic energy equation of the lamellae director field, predicts the nucleation‐growth processes, domain patterns and internal lamellae organization of spherulitic structures in semicrystalline polymer solidification. Results of computer simulation are reported and compared with experimental observations.     

Multiaxial fatigue life modelling using hybrid approach of critical plane and genetic algorithm

This paper presents a new hybrid approach for multiaxial fatigue life estimation, based on continuum damage mechanics theory and a genetic algorithm with critical plane model formulation. The hybrid model employs a genetic algorithm based setup for calibration with standard proportional and non‐proportional profiles to predict fatigue life for complex loading profiles. The model is evaluated using experimental fatigue life data for SS304 steel. Calibration using simplified profiles is in agreement with the requirement for cost‐effective experimental fatigue life testing. In‐phase and out‐of‐phase loads are used for calibration, and fatigue life is predicted for more complicated profiles. The results show good agreement between the estimated and experimental fatigue life, and calibration through simple loading histories to predict fatigue life for complex histories appears to be an effective solution using the proposed model. A brief comparison is presented with fatigue life estimation performance of the proposed model with models available in commercial codes. Proposed model found to be more consistent in fatigue life prediction against various loading conditions.     

A novel ratiometric fluorescent Yb3+ sensor based on a N′-(1-oxoacenaphthylen-2(1H)-ylidene)furan-2-carbohydrazide as a suitable fluorophore

N′-(1-oxoacenaphthylen-2(1H)-ylidene)furan-2-carbohydrazide (L) was synthesized for the first time and used as a ratiometric fluorescent chemosensor for high selective recognition of Yb³⁺ ions in acetonitrile (MeCN) solution. The L–Yb³⁺ complexation quench the fluorescence of L at 420 nm and induces new fluorescent enhancement at 516 nm. Due to the formation of a 2:1 metal ligand complex in acetonitrile solution, the red shift of fluorescent emission spectrum occurred. The sensor shows a linear response toward Yb³⁺ ion concentration in the range of 3.3 × 10^? 7 M to 1.0 × 10^? 4 M with detection limit of 1.2 × 10^? 7 M. The fluorescent probe exhibits high selectivity for Yb³⁺ ion over the other common mono-, di-, and trivalent cations.