Novel Gas-Liquid-Solid Reactors

Multiphase reactors involving gas, liquid, and solid phases have several important applications in the chemical industry, particularly in catalytic processes. Some of the well-known examples are: hydrogenation and oxidation of organic compounds, hydro-processing coal-derived and petroleum oils, Fischer-Tropsch synthesis, and methanation reactions. Due to the presence of three phases, the problem of reactor design is often important to achieve effective mass and heat transfer as well as a mixing pattern favorable to the particular process. The reactors are mainly of two types: (a) solid catalyst is suspended either by mechanical agitation or gas-induced agitation and (b) solid catalyst is in a fixed bed with concurrent or countercurrent feed of gas and liquid re-actants. The reactor types conventionally used in industry are: (a) mechanically agitated or bubble column slurry reactors and (b) trickle-bed or packed-bed bubble reactor. The various design and modeling aspects of these reactors have been reviewed by Satterfield [1], Chaudhari and Ramachandran [2], Shah [3,4], Ramachandran and Chaudhari [5], Shah et al. [6], and Herskowitz and Smith [7]. In several industrial processes these reactor designs are modified to achieve a certain specific objective, such as better heat or mass transfer, higher catalyst efficiency, better reactor performance and selectivity, etc. Similarly, specially designed reactors are often used for laboratory kinetic studies or to understand a certain phenomenon. Thus, novel multiphase reactors are becoming important from both academic and industrial viewpoints. Some of the recently introduced novel gas-liquid-solid reactor types are: (a) loop recycle slurry reactors, (b) basket-type reactors, (c) ebullated-bed reactors, (d) internal or external recycle reactors, (e) multistage slurry or packed-bed reactors, (f) column reactors with sieve trays or multiple agitators, (g) gas-induced agitated reactors, and (h) horizontal-packed-bed reactors. are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed. These novel reactor designs are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed.     

Criteria for axial dispersion effects in adiabatic trickle bed hydroprocessing reactors

This paper first outlines an approximate solution to the governing equations for an adiabatic hydroprocessing trickle bed reactor operating in the presence of axial dispersion. The approximate solution agrees very well with the rigorous numerical solution for Peclet numbers greater than approximately three.Using the approximate solution, criteria for significant axial dispersion effect are obtained. These criteria indicate that at high conversions, an adiabatic operation produces a larger axial dispersion effect than the isothermal operation. At low conversions, opposite results are obtained.The derived criteria are used to evaluate the orders of magnitude of Peclet number required to avoid axial dispersion effect in pilot scale adiabatic reactors for (a) residual hydrodesulfurization (b) hydrocracking of gas oils and (c) denitrogenation of shale oils. The calculations indicate that the axial dispersion effect is of less importance in case (c) than in cases (a) and (b).Finally, the role of heat effects on the axial dispersion in a vapor phase fixed bed adiabatic reactor is evaluated.     

DPV: a taxonomy for utilizing deep learning as a prediction technique for various types of cancers detection

Multimedia Tools and Applications - Deep learning (DL) is a type of machine learning capable of processing large quantities of data to provide analytic results based on a particular...     

Generic Adaptive Sliding Mode Control for a Quadrotor UAV System Subject to Severe Parametric Uncertainties and Fully Unknown External Disturbance

International Journal of Control, Automation and Systems - This paper aims to provide a generic robust controller that is able to manipulate all kinds of quadrotor unmanned aerial vehicle (UAV)...     

A cross-layer approach for partition detection at overlay layer for structured P2P in MANETs

Due to limited radio range and mobility of nodes in mobile ad hoc networks (MANETs), the network partitioning and merging could occur frequently. When structured peer-to-peer (P2P) overlays are running over MANETs, then network partition in the physical network can also cause network partition at the overlay layer. Existing approaches for structured P2P overlay over MANETs do not detect network partition at the overlay layer. This paper proposes a cross-layer approach to detect network partition at the overlay layer for structured P2P overlay over MANETs. Simulation results show that the proposed approach is highly effective and efficient in terms of routing overhead, success ratio and false-negative ratio.     

DeepClassRooms: a deep learning based digital twin framework for on-campus class rooms

Neural Computing and Applications - A lot of different methods are being opted for improving the educational standards through monitoring of the classrooms. The developed world uses Smart...     

Challenges in Liquid‐Phase Exfoliation,Processing, and Assembly of Pristine Graphene

Recent developments in the exfoliation, dispersion, and processing of pristine graphene (i.e., non‐oxidized graphene) are described. General metrics are outlined that can be used to assess the quality and processability of various “graphene” products, as well as metrics that determine the potential for industrial scale‐up. The pristine graphene production process is categorized from a chemical engineering point of view with three key steps: i) pretreatment, ii) exfoliation, and iii) separation. How pristine graphene colloidal stability is distinct from the exfoliation step and is dependent upon graphene interactions with solvents and dispersants are extensively reviewed. Finally, the challenges and opportunities of using pristine graphene as nanofillers in polymer composites, as well as as building blocks for macrostructure assemblies are summarized in the context of large‐scale production.     

Effects of metal-contaminated soils on the growth, sexual development, and early cocoon production of the earthworm Eisenia fetida, with particular reference to zinc

Juvenile Eisenia fetida (Savigny) were exposed for 20 weeks to an uncontaminated soil and to soils contaminated with cadmium, copper, lead, and zinc collected from seven sites at different distances from a smelting works at Avonmouth, southwest England. The survival, growth (= weight after 5 weeks exposure), time to sexual maturation (= percentages of adults present after 8 weeks), and reproduction (= number of cocoons produced by the worms) were compared with soil metal concentrations. Of the parameters measured, growth and sexual maturation time had the lowest EC50 values. The effects of metal-contaminated soils could be attributed both to the direct toxicity of the metals and to changes in the "scope for growth" of the exposed worms. A comparison of the results with those of an earlier toxicity test conducted with adult worms indicated that juveniles are more sensitive to metals than adults. Significant toxic effects on the growth and sexual maturation times of juveniles were detected in soils from sites for which no significant effects on the cocoon production of adults could be detected. The greater sensitivity of juvenile worms indicates the importance of considering effects on a variety of life history stages when conducting a risk assessment of the effects of pollutants in soils. Although E. fetida does not occur naturally in soils at Avonmouth, the present study provides evidence to support the suggestion that pollution from the smelter is responsible for the absence of worms within 2 km of the factory. Results presented in this paper, and from previous studies, suggest the observed absence is due to the effects of zinc on the growth and maturation of juveniles and the cocoon production rate of adult worms.     

Development into blastocysts of bovine oocytes cryopreserved by ultra-rapid cooling

The objective of the research described was to devise an efficient procedure to cryopreserve in vitro-matured bovine oocytes, using in vitro fertilization (IVF) and development of resultant zygotes into blastocysts as criteria of oocyte survival. Oocytes at metaphase II were found to be extremely sensitive to chilling. Cooling them to O degrees C for as little as 5 sec significantly decreased their capability to cleave and develop further after IVF; after 80 sec at 0 degrees C, only approximately 10% of chilled oocytes developed into blastocysts. Oocytes were also adversely affected by brief exposures to 4 M and 5.5 M ethylene glycol (EG) solutions supplemented with sucrose; after being suspended in either of these EG solutions in plastic straws and plunged directly into liquid nitrogen (LN2), few of the oocytes were fertilized and developed. To "outrace" chilling injury, oocytes contained in < 1 microliter of EG solution were placed onto electron microscope grids and plunged directly into N2 slush or LN2. After such ultra-rapidly cooled oocytes were warmed, 30% of them cleaved after IVF, and half of these developed into blastocysts-- survival rates equivalent to those for oocytes that had been exposed to EG without any cooling. This method offers promise as a novel way to cryopreserve bovine oocytes.