Potential and viability of grid-connected solar PV system in Bangladesh

The potential of grid-connected solar PV system in Bangladesh was estimated utilizing GeoSpatial toolkit, NASA SSE solar radiation data and HOMER optimization software. Financial viability of solar photovoltaic as an electricity generation source for Bangladesh was also assessed utilizing a proposed 1-MW grid-connected solar PV system using RETScreen simulation software for 14 widespread locations in Bangladesh. The technical potential of gird-connected solar PV in Bangladesh was calculated as about 50174 MW. The annual electricity generation of the proposed system varied depending on the location between 1653 MWh and 1854 MWh, with a mean value of 1729 MWh. Several different economic and financial indicators were calculated, such as the internal rate of return, net present value, benefit-cost ratio, cost of energy production and simple payback. All indicators – for all sites – showed favorable condition for development of the proposed solar PV system in Bangladesh. The results also showed that a minimum of 1423 tons of greenhouse gas emissions can be avoided annually utilizing the proposed system at any part of the country.     

Aloe vera gel: a new thickening agent for pigment printing

An attempt was made to print cotton fabric with pigments using a new thickening agent based on Aloe vera gel in combination with sodium alginate. The results were compared with the standard conventional printing recipe containing synthetic thickener, and a favourable effect of Aloe vera introduction was achieved. The results show that the properties of the printed fabric (sharpness, colour yield, overall fastness properties, softness, and water vapour transmission) are dependent on the percentage of Aloe vera gel in the thickener combination, the concentration of printing auxiliaries, and the curing conditions. Optimal printing properties were achieved by using a printing paste containing 80% Aloe vera/20% sodium alginate (700 g kg^?1), pigment (50 g kg^?1), binder (145 g kg^?1), fixer (10 g kg^?1), and ammonium sulfate (5 g kg^?1), followed by drying at 85 °C for 5 min and curing at 150 °C for 3 min. The sample printed with the new recipe showed superior rubbing fastness and handle properties, with a slightly lower colour yield, when compared with the sample printed with synthetic thickener. Finally, economic issues arising from synthetic thickener substitution are highlighted.     

Effect of different titania phases on the hydrogen gas sensing features of polyaniline/TiO2 nanocomposite

This paper presents a resistance-based hydrogen gas sensor using polyaniline (emeraldine)/TiO₂ nanocomposite (PT–NC) thin film. It is demonstrated that different gas sensing features can arise when various TiO₂ phases (anatase and rutile) are applied. The different wt% of TiO₂ phases were dispersed into an acidic solution of aniline monomers and PT–NCs were synthesized by an in-situ self-assembly chemical oxidative polymerization method of aniline. PT–NCs deposited on an epoxy glass substrate having Cu-interdigited electrodes for hydrogen gas sensing at air pressure and room temperature. Our results show that the better sensitivity of the sensor strongly depends on the sensor surface morphology and its components. Furthermore, hydrogen gas sensing mechanism of the sensor based contact areas between Pani chains and TiO₂ grains was studied.     

Faecal Composition and Nitrogen Excretion of Rats Fed on Diets Containing Sweet Lupin (Lupinus angustifoliusL) or its Fractions

Five N balance studies were conducted to determine the faecal composition and N excretion of feeding raw Lupinus angustifolius seed meal and its fractions for growing rats using a semi-synthetic lactalbumin-based diet as control. Diets were formulated to have equal amounts of energy. The protein was incorporated at the level of 10% bulk and contained unsupplemented lupin seed meal (LMU) and fully supplemented lupin seed meal (LMFS) at 360 g kg⁻¹ diet, aqueous extract non-dialysed (LPAND) at 196 g kg⁻¹ aqueous extract dialysed soluble at pH 7·0 (LPAD) at 148 g kg⁻¹ aqueous extract dialysed insoluble at pH 7·0 (LPADI) at 124 g kg⁻¹, buffer dialysed soluble at pH 7·0 (BUSOL) at 136 g kg⁻¹, buffer dialysed insoluble at pH 7·0 (BUDI) at 119 g kg⁻¹ and lupin meal residue after aqueous and buffer extraction (LMR) at 170 g kg⁻¹ diet. Rats were pair-fed for 10 days with all the above diets which had been supplemented with essential amino acids up to the target requirements for rats. Faecal wet and dry weight were increased in rats fed on LMU, LMPS and LMR diets compared to those obtained from the control diet based on lactalbumin (milk protein) LACT. The higher faecal weight was largely due to water content. The higher faecal N excretion observed in LMU, LMFS, LPAND, LPAD, BUSOL, BUDI and LMR compared to that of LACT diet was significantly lower and thus which was assumed not to be due to a decrease in the digestibility of the dietary protein, which was over 90% as compared to that in the control group. Analysis suggested that an increase in endogenous N excretion is involved in the rise of its excretion in the faeces, and indicates a long-term effect of this seed as a protein and or fibre source in monogastrics.     

Effect of tanniniferous Terminalia chebula extract on rumen biohydrogenation, ∆(9)-desaturase activity, CLA content and fatty acid composition in longissimus dorsi muscle of kids

Conjugated linoleic acid, a fatty acid found in milk fat and ruminant meat is one of the functional food components. Modifying fatty acid composition so as to increase CLA and other beneficial PUFA/MUFA level and reducing SFA levels might be a key to enhance the neutraceutical and therapeutic value of ruminant-derived food products. In the present experiment, the effect of supplementation of polyphenol rich Terminalia chebula plant extract at different concentrations (1.06 g/kg and 3.18 g/kg of body weight in T1 and T2 groups, respectively) was investigated on fatty acid composition of rumen fluid, plasma, intramuscular fat and Δ9-desaturase activity in longissimus dorsi muscle of crossbred kids. Total MUFA and PUFA content in muscle were enhanced by 25 and 35%, respectively, whereas SFA was reduced by 20% thereby improving the desaturation index. Δ9-desaturase activity also increased by 47% resulting in an enhancement of total CLA content (58.73%) in muscle.     

Novel multiplex PCR-RFLP assay discriminates bovine,porcine and fish gelatin substitution in Asian pharmaceuticals capsule shells

Gelatin is widely used in pharmaceuticals as a protective coating, such as soft and hard capsule shells. However, the animal source of gelatin is a sensitive issue because certain gelatins such as porcine and bovine gelatins are not welcome in Halal, Kosher and Hindus’ consumer goods. Recently, we have documented DNA barcoding and multiplex PCR platforms for discriminating porcine, bovine and fish gelatins in various fish and confectionary products; but those assays were not self-authenticating and also not tested in highly refined pharmaceutical products. To address this knowledge gap, here we report a self-authenticating multiplex PCR-restriction fragment length polymorphism (RFLP) assay to identify animal sources of various gelatin in pharmaceutical capsules. Three different restriction enzymes, BsaAI, Hpy188I and BcoDI were used to yield distinctive RFLP patterns for gelatin-based bovine (26, 94 bp), fish (97, 198 bp) and porcine (17, 70 bp) DNA in control experiments. The specificity was cross-tested against 16 non-target species and the optimised assay was used to screen gelatin sources in 30 halal-branded pharmaceuticals capsule shells. Bovine and porcine DNA was found in 27 and 3 of the 30 different capsules products. The assay was suitable for detecting 0.1 to 0.01 ng total DNA extracted from pure and mixed gelatins. The study might be useful to authenticate and monitor halal, kosher, vegetarian and Hindu compliant pharmaceuticals, foods and cosmetics.     

Synthesis,Characterization and Catalytic Activities of Palladium(II) Nitroaryl Complexes

Two palladium(II) nitroaryl complexes trans-[bromo(p-nitrophenyl)bis(triphenylphosphine)palladium(II)] 1 and trans-[bromo(2,4-dinitrophenyl)bis(triphenylphosphine)palladium(II)] 2 have been synthesized. The complexes were characterized by FTIR and NMR (¹H, ¹³C and ³¹P) spectroscopy and elemental analysis. The molecular structure of complex 2, as confirmed by X-ray crystallography, reveals that the Pd atom and its neighboring groups (two PPh₃, Br and phenylene group) lie in a slightly distorted square plane. In the UV–Vis spectra of the complexes 1 and 2, the palladium to aryl charge transfer bands were observed. The emission peaks from the singlet excited states (S₁ → S₀) were observed in the photoluminescence spectra of the complexes. The thermal stability of the complexes has been studied by thermal gravimetric analysis (TGA). TGA data showed that both complexes are thermally stable up to 200 °C, and complex 1 is more stable than 2. The catalytic efficiency of the new palladium(II) complexes was studied as demonstrated using the Sonogashira coupling reactions with good yields. The experimental results suggest that the Sonogashira coupling reactions can be performed at moderate temperature (50 °C) using these new palladium(II) complexes as catalysts.     

Network coding for unicast in a WiFi hotspot: Promises,challenges, and testbed implementation

In offices and residential buildings, WiFi networks have become a primary means for providing Internet access to wireless devices whose dominant traffic pattern is unicast. In the meantime, the emergence of network coding has brought about great promises for multicast in communication networks where intermediate nodes are allowed to process independent incoming information flows. Little is known about network coding for unicast, however. The objective of this paper is thus to depart from multicast scenarios and shed light on several possible unicast scenarios to which network coding may be applied in a WiFi hotspot in order to obtain communication benefits such as throughput gain, fairness, and reduced protocol complexity. We identify five representative scenarios in which network coding may be used to benefit unicasting in a WiFi hotspot. Several open research issues and practical challenges related to each scenario are discussed individually. To illustrate the benefits of network coding for unicast in a WiFi hotspot, we propose and implement iCORE: The interface COoperation Repeater-aided network coding Engine. iCORE is a practical system in which multi-channel multi-radio repeaters are used to relay unicast traffic for those terminals sitting far away from an access point and suffering from weak signals at a WiFi hotspot. It is based on our last scenario which illustrates the synergy among network coding, opportunistic routing, and interface management. Utilizing idle wireless interfaces and listening to traffic opportunistically, iCORE allows packets to move across the interfaces and to be coded across flows whenever it sees more transmission opportunities. We evaluate iCORE on a four-node chain-like topology testbed implemented using IEEE 802.11b/g radios and compare it to MORE – the state-of-art intra-flow network coding implementation based on opportunistic routing. Our experimental results reveal promising gains in terms of throughput over MORE.     

Approximate methods in Bayesian point process spatial models

A range of point process models which are commonly used in spatial epidemiology applications for the increased incidence of disease are compared. The models considered vary from approximate methods to an exact method. The approximate methods include the Poisson process model and methods that are based on discretization of the study window. The exact method includes a marked point process model, i.e., the conditional logistic model. Apart from analyzing a real dataset (Lancashire larynx cancer data), a small simulation study is also carried out to examine the ability of these methods to recover known parameter values. The main results are as follows. In estimating the distance effect of larynx cancer incidences from the incinerator, the conditional logistic model and the binomial model for the discretized window perform relatively well. In explaining the spatial heterogeneity, the Poisson model (or the log Gaussian Cox process model) for the discretized window produces the best estimate.