Thermal fingerprint of silica encapsulated phase change nanoparticles

This paper describes a new type of silica microspheres that contain a panel of phase change nanoparticles (Field's alloy, indium, tin or lead-tin eutectic alloy). The thermophysical properties of solid-liquid phase change nanoparticles, i.e., composition-dependent melting temperatures, sharp melting peaks, and large thermal scan range, allow construction of a large number of silica microspheres that have thermally distinguishable patterns of melting temperatures.     

Synthesis, conformation, and activity of human insulin-like peptide 5 (INSL5)

Insulin-like peptide 5 (INSL5) was first identified through searches of the expressed sequence tags (EST) databases. Primary sequence analysis showed it to be a prepropeptide that was predicted to be processed in vivo to yield a two-chain sequence (A and B) that contained the insulin-like disulfide cross-links. The high affinity interaction between INSL5 and the receptor RXFP4 (GPCR142) coupled with their apparent coevolution and partially overlapping tissue expression patterns strongly suggest that INSL5 is an endogenous ligand for RXFP4. Given that the primary function of the INSL5-RXFP4 pair remains unknown, an effective means of producing sufficient quantities of this peptide and its analogues is needed to systematically investigate its structural and biological properties. A combination of solid-phase peptide synthesis methods together with regioselective disulfide bond formation were used to obtain INSL5. Both chains were unusually resistant to standard synthesis protocols and required highly optimized conditions for their acquisition. In particular, the use of a strong tertiary amidine, DBU, as N(alpha)-deprotection base was required for the successful assembly of the B chain; this highlights the need to consider incomplete deprotection rather than acylation as a cause of failed synthesis. Following sequential disulfide bond formation and chain combination, the resulting synthetic INSL5, which was obtained in good overall yield, was shown to possess a similar secondary structure to human relaxin-3 (H3 relaxin). The peptide was able to inhibit cAMP activity in SK-N-MC cells that expressed the human RXFP4 receptor with a similar activity to H3 relaxin. In contrast, it had no activity on the human RXFP3 receptor. Synthetic INSL5 demonstrates equivalent activity to the recombinant-derived peptide, and will be an important tool for the determination of its biological function.     

Comparison of alkaline fuel cell membranes of random & block poly(arylene ether sulfone) copolymers containing tetra quaternary ammonium hydroxides

A series of modified anion conductive block poly(arylene ether sulfone) copolymer membranes containing a selective substituted unit, 15%, 20% and 25% 4,4′-(2,2-diphenylethenylidene) diphenol, were prepared for use in alkaline fuel cells. The anion exchange membranes were synthesized by first introducing chloromethyl groups. Quaternary ammonium groups could then be added to the tetra-phenyl ethylene units, followed by subsequent ion exchange. The tetra quaternary ammonium hydroxide polymers showed high molecular weights and exhibited high solubility in polar aprotic solvents. The block copolymer membrane showed higher ionic conductivity (21.37 mS cm⁻¹) than the random polymer membrane of similar composition (17.91 mS cm⁻¹). The membranes showed good chemical stability in 1.0 M KOH solution at 60 °C. They were characterized by ¹H NMR, FT-IR, TGA and measurements of ion exchange capacity, water uptake and ionic conductivity.     

A cost-effective approach for fast voltage recovery of power distribution networks with renewable energy

This paper presents a cost-effective reactive power planning for active distribution networks based on a new index called reactive power loadability (Q-loadability). The impact of high renewable energy penetration on the static voltage stability of the system is analysed. The effect of load models in distributed generation planning is also demonstrated through nonlinear simulations. In order to ensure fast voltage recovery after a sudden disturbance, compensating devices are located using Q-loadability to increase the system voltage stability limit. Both static and dynamic analyses are carried out to determine the size of distribution static synchronous compensator (D-STATCOM). The parameters of the controller are also tuned to reduce the rating of D-STATCOM. Simulation results show that the proposed approach can reduce the sizes of compensating devices required which, in turn, reduces costs. The effectiveness of the proposed algorithm is verified through several case studies.     

Determining frustum depth of 304 stainless steel plates with various diameters and thicknesses by incremental forming

Nowadays incremental forming is more popular because of its flexibility and cost saving. However, no engineering data is available for manufacturers for forming simple shapes like a frustum by incremental forming, and either expensive experimental tests or finite element analysis (FEA) should be employed to determine the depth of a frustum considering: thickness, material, cone diameter, wall angle, feed rate, tool diameter, etc. In this study, finite element technique, confirmed by experimental study, was employed for developing applicable curves for determining the depth of frustums made from 304 stainless steel (SS304) sheet with various cone angles, thicknesses from 0.3 to 1 mm and major diameters from 50 to 200 mm using incremental forming. Using these curves, the frustum angle and its depth knowing its thickness and major diameter can be predicted. The effects of feed rate, vertical pitch and tool diameter on frustum depth and surface quality were also addressed in this study.     

Effect of preheating temperature on the microstructure of walleye pollack surimi gels under the inhibition of the polymerisation and degradation of myosin heavy chain

BACKGROUND: The physical attribute of heat‐induced gel texture is highly dependent on the microstructure of the gel. In this study the microstructures of walleye pollack surimi gels preheated at various temperatures with and without inhibitors (ethylenediamine‐N,N,N′,N′‐tetraacetic acid, iodoacetamide and leupeptin) were observed with a natural scanning electron microscope. RESULTS: Without inhibitors, gels preheated at 30 °C showed a fine and uniform network structure together with the highest polymerisation of myosin heavy chain (MHC) and the highest gel strength. At 60 °C, gels exhibited a broken, disrupted and loose cluster‐like structure together with the highest degradation of MHC and the lowest gel strength. Under the inhibition of polymerisation and degradation of MHC a fine network was observed up to 40 °C during preheating. However, after a second step of heating at 80 °C the microstructures were disrupted and resembled each other regardless of the preheating temperature. CONCLUSION: Heat‐induced gel formation is related to the polymerisation and degradation of MHC and the microstructure of the gel during preheating. Gelation occurred during setting even under the inhibitory condition, and the formation of covalent bonding by transglutaminase is not essential to the formation of a three‐dimensional network during setting but is essential to the gel strength enhancement effect of setting by subsequent heating at 80 °C. Copyright © 2010 Society of Chemical Industry     

Investigation of Structural Defects in CdZnTe Detector-Grade Crystals

We investigated structural defects in CdZnTe detector-grade crystals grown under different conditions. Here, we report our findings from high-resolution electron microscopy [transmission electron microscopy (TEM) and scanning TEM (STEM)] and scanning electron microscopy integrated with energy-dispersive x-ray spectroscopy to characterize the material’s structural and chemical composition. Combining these techniques gave us important information about the defects, their concentration, and the elemental composition of the CdZnTe crystals. Our experimental observations demonstrated some distinct nanostructural defects in the crystals that may play a major role in device performance.     

Development of Synthetic Food-Related Attractant for Carpophilus davidsoni and its Effectiveness in the Stone Fruit Orchards in Southern Australia

An effective synthetic attractant, based on host-related volatile compounds, was developed for the nitidulid beetle, Carpophilus davidsoni, as part of a program for managing this pest in Australian peach orchards. Fermenting peach juice and whole peaches and nectarines served as chemical models for the attractant, and synthetic formulations were sought that matched the natural sources, both with respect to emission rates of key chemicals (in ng/min) and attractiveness to flying beetles. All volatile sources were kept in airstreams during laboratory chemical measurements, and these airstreams were subsequently directed to the wind-tunnel behavioral assay, allowing the determined emission rates of compounds to be associated with particular levels of attractiveness. Chemical sampling of airstreams was by solid-phase microextraction, and analysis was by gas chromatography and mass spectrometry. A volatile delivery system was coupled to the wind tunnel and allowed facile manipulation of natural and synthetic scents. The final blend, modeled after fermenting peach juice, contained ethanol as the main constituent and 2-methyl-1-propanol, 2-methyl-1-butanol, 3-methyl-1-butanol, acetaldehyde, and ethyl acetate as minor constituents, all in water solution. Blend components were synergistic, and use of a mixture was essential for optimal attractiveness. The synthetic blend was highly effective in the field and is intended to replace fermenting peach juice and overripe peaches, which were previously used as synergists of the Carpophilus spp. aggregation pheromones in attract-and-kill stations.Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Improved microcirculatory effect of D-allose on hepatic ischemia reperfusion following partial hepatectomy in cirrhotic rat liver

D-allose, one of the rare sugars produced from D-psicose, has been shown to be effective against reperfusion injury after ischemia and partial hepatectomy in cirrhotic rat liver by improving remnant liver blood flow and survival rates, and decreasing liver enzyme levels and liver tissue injury levels. These findings demand further study of the clinical implications of this sugar in view to the advancing fields of liver surgery and transplantation.