Finite element computational modelling and experimental investigation of perforated NiTi plates under tension

This paper explores the pseudoelastic deformation behaviour of perforated near-equiatomic NiTi plates by means of finite element modelling and tensile experimentation. The numerical modelling is based on an elastohysteresis model, which takes into account the hysteretic and hyperelastic contributions of material response in the global deformation. The effects of hole size, shape and number on stress–strain behaviour are discussed. The numerical results are compared and validated with experimental data.     

Compositional changes during guava fruit ripening

Compositional changes of fruit pulp and peel during ripening of white- and pink-fleshed guava fruits were studied. The white and pink guava fruits exhibited a typical climacteric pattern of respiration. Fruit tissue firmness decreased progressively, in a similar manner, in both guava fruit types. Total soluble solids (TSS) and total sugars increased in pulp and peel of both guava types with decrease in flesh firmness. More increase in total sugars was observed after the climacteric peak of respiration. Reducing sugars and titratable acidity increased up to the full-ripe stage and then decreased. Ascorbic acid and phenolic compounds decreased continuously during ripening of the two types. The peel showed higher values of ascorbic acid, total protein and phenolic compounds than the plup. The white-fleshed guavas had higher levels of TSS, total sugars, reducing sugars. titratable acidity, phenolic compounds and ascorbic acid content then the pink-fleshed fruits.     

Simulations of microfluidic droplet formation using the two-phase level set method

Microdroplet formation is an emerging area of research due to its wide-ranging applications within microfluidic based lab-on-a-chip devices. Our goal is to understand the dynamics of droplet formation in a microfluidic T-junction in order to optimize the operation of the microfluidic device. Understanding of this process forms the basis of many potential applications: synthesis of new materials, formulation of products in pharmaceutical, cosmetics and food industries. The two-phase level set method, which is ideally suited for tracking the interfaces between two immiscible fluids, has been used to perform numerical simulations of droplet formation in a T-junction. Numerical predictions compare well with experimental observations. The influence of parameters such as flow rate ratio, capillary number, viscosity ratio and the interfacial tension between the two immiscible fluids is known to affect the physical processes of droplet generation. In this study the effects of surface wettability, which can be controlled by altering the contact angle, are investigated systematically. As competitive wetting between liquids in a two-phase flow can give rise to erratic flow patterns, it is often desirable to minimize this phenomenon as it can lead to a disruption of the regular production of uniform droplets. The numerical simulations predicted that wettability effects on droplet length are more prominent when the viscosity ratio λ (the quotient of the viscosity of the dispersed phase with the viscosity of the continuous phase) is O(1), compared to the situation when λ is O(0.1). The droplet size becomes independent of contact angle in the superhydrophobic regime for all capillary numbers. At a given value of interfacial tension, the droplet length is greater when λ is O(1) compared to the case when λ is O(0.1). The increase in droplet length with interfacial tension, σ, is a function of with the coefficients of the regression curves depending on the viscosity ratio.     

Microstructural and Hardness Studies of Cu-10wt.%Sn Alloy Under Different Aging Conditions

Microstructure of Cu-10wt.%Sn alloy, prepared by powder metallurgy technique and sintered at 900 °C for 120 min in hydrogen atmosphere, was studied by optical microscopy and XRD technique as a function of aging time. Isothermal aging of the alloy specimens was performed at 250 °C for a period of 30, 60, 120, 300, and 1440 min after solution treatment at 500 °C for 60 min. Rockwell hardness of aged specimens was also measured at room temperature as a function of aging time. It was observed that microstructure of the as-sintered specimens consists of the grains of alpha Cu-Sn solid solution. Moreover, solution treatment of the alloy specimens followed by quenching in water increased the hardness of the as-sintered alloy specimens from 35.5 to 59.8 HRF due to the residual stresses generated by fast cooling. Aging at 250 °C for 30, 60, and 120 min was found to cause a decrease in hardness from 59.8 to 45.1 HRF, whereas the specimens aged for 300 and 1440 min show an increase in hardness from 45.1 to 75.7 HRF. The values of porosity calculated from XRD patterns of the alloy specimens referred to show that porosity varies with aging time in a manner opposite to that of hardness, e.g., porosity is maximum for 120 min aging time where hardness is minimum.     

Determinants of rural household food security: a comparative analysis of African and Asian studies

This paper reviews the determinants of rural household food security in Africa and Asia where more than 88% of the world's undernourished people live. A conceptual model is proposed on the basis of the three widely known components of food security: food availability, accessibility and utilisation. This model is used to select a total of 40 peer‐reviewed studies carried out over the last decade (20 each from Africa and Asia). A meta‐analysis technique is then used to identify which determinants of food security have been highlighted and how well the causality is demonstrated. Food availability is the most studied component in both regions, followed by food accessibility, while food utilisation is the most neglected component in these studies. © 2013 Society of Chemical Industry     

Effect of cobalt-60 γ radiation on the physical and chemical properties of poly(ethylene terephthalate) polymer

The structural, optical, and morphological properties of Co⁶⁰ γ irradiation on poly(ethylene terephthalate) polymer samples were studied with X-ray diffraction (XRD), ultraviolet–visible spectroscopy, scanning electron microscopy (SEM), and Raman spectroscopy. The diffraction pattern of virgin sample showed that the polymer was semicrystalline in nature. However, because of irradiation, the crystallinity decreased up to a dose level of 110 kGy and increased up to 300 kGy. The crystallite size, strain, and dislocation were calculated from the XRD data, and the crystallite size decreased from 291.07 to 346.90 Å. The absorption edge shifted from 315 to 330 nm, and the band gap of the samples decreased from 3.79 to 3.66 eV. The SEM micrographs showed radial bulging along with inhomogeneous liner exfoliation, and also, a rocky shape pattern with different sizes was observed. A significant change was found in the Raman spectra of the γ-irradiated polymer at the highest dose. The results of the structural, optical, and morphological studies show recovery characteristics at the highest dose level of 300 kGy. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Measurements of crosspolarisation and gain reduction due to dust on a microwave reflector antenna

9 GHz measurements of effects of dust accretion on the surface of a reflector antenna confirm an earlier prediction of a larger gain reduction when the dust layer covers half the area. Crosspolarisation levels were higher than expected theoretically. Deposits on the primary feed also cause high crosspolarisation.     

Back-gated buried oxide MOSFETs in a high-voltage bipolartechnology for bonded oxide/SOI interface characterization

A novel back-gated P-MOSFET structure is fabricated in a high-voltage complementary bipolar technology using BESOI (bonded etch back SOI) substrates. The P+ buried layer regions, used for the PNP BJT are used as the source and drain regions, the N- epi as the channel region, the silicon handle wafer as the gate, and the BOX (buried oxide) as the gate oxide. The P-MOSFET was used to characterize the interface between the BOX and the SOI. The devices exhibit high sub-threshold slope which is attributed to a high interface state density of about 2×10¹²/cm² at the bonding interface. Bias-temperature stress measurements show an effective mobile charge density of 4×10¹⁰/cm² in the buried oxide     

Clozapine for the control of hemiballismus

Pharmacological agents used for the control of ballistic movements include chloral hydrate, barbiturates, paraldehyde, bromides, phenothiazines, progabide, haloperidol, pimozide, reserpine, tetrabenazine, sodium valproate, and dimethylaminoethanol. These agents are believed to act by different mechanisms, including modification of dopaminergic, GABAergic, or cholinergic mechanisms. We report a case where, after failure of haloperidol, phenobarbital, and pimozide, the hemiballistic movements were controlled with clozapine.