Adhesively bonded joints are increasingly being used in joining various structural components. Adequate understanding of the behaviour of adhesively bonded joints is necessary to ensure efficiency, safety and reliability of such joints. While several joint configurations, such as the single- and double-lap joints have received considerable consideration, the single-strap joint configuration has received little attention, partly because earlier studies have shown it to be the least efficient.
One of the objectives of this paper is to demonstrate that strap joints can be as efficient as lap joints, as long as they are properly designed. This will be done through a detailed analytical investigation into influence of the parameters that govern peak stresses in the adhesive. The next objective is to produce simple equations by which the design of strap joint could be facilitated in an effective manner. For this, the developed analytical expressions are simplified and shown to provide accurate results. The derived solutions provide better insight into understanding the parameters that most influence the edge forces. 相似文献
This study investigated the biological denitrification method which is a treatment method able to reduce inorganic nitrate compounds to harmless nitrogen gas. Autohydrogenotrophic denitrifying bacteria were used in this study to prevent any problematic outcomes associated with heterotrophic microorganisms. An upflow bio-electrochemical reactor (UBER) was used to accommodate hydrogenotrophic denitrifying bacteria employing palm shell granular activated carbon (GAC) as the biocarrier and cathode material. Bicarbonate as the external inorganic carbon source was fed to the reactor and hydrogen as the electron donor was generated in situ through electrolysis of water. Central composite design (CCD) and response surface methodology (RSM) were applied to investigate the effects of two operating parameters, namely electric current (I) and hydraulic retention time (HRT), on performance of the UBER. Electric current range of 0-20 mA and HRT range of 6-36 h were examined and results showed that nitrate can be entirely reduced within application of a wide operational range of electric current (10-16 mA) as well as HRT (13.5-30 h). However, increase of pH at cathode zone up to 10.5 inhibited nitrite reduction, and it was not reduced to the satisfactory level. 相似文献
Pure geometric isomers of conjugated linoleic acid were prepared from castor oil as the primary starting material. Methyl
octadeca-9Z, 11E-dienoate (2) and methyl octadeca-9Z, 11Z-dienoate (4) were obtained by zinc reduction of methyl santalbate (1, methyl octadec-11E-en-9-ynoate) and methyl octadec-11 Z-en-9-ynoate (3), respectively, as the key intermediates. Methyl octadeca-9E, 11E-dienoate (8) and methyl octadeca-9E, 11Z-dienoate (9) were prepared by demesylation of the mesyloxy derivative of methyl ricinelaidate (6, methyl 12-hydroxy-octadec-9 E-enoate). A study of the nuclear magnetic resonance spectral properties was carried out and the shifts of the olefinic carbon
atoms of 18:2(9Z, 11E) (2) and 18:2(9E, 11Z) (9) were readily identified by a combination of incredible natural abundance double quantum transfer experiment, heteronuclear
multiple bond correlation, and 1H−13C correlation spectroscopy correlation techniques. Doubts remain in the absolute identification of the individual olefinic
carbon atoms of the 18:2(9Z, 11Z) (4) and 18:2(9E, 11E) (8), except the fact that the shifts of the “inner” (C-10 and C-11) and “outer” (C-9 and C-12) positioned olefinic carbon atoms
of the conjugated diene system are distinguishable. 相似文献
In this paper, two Zigler-Natta catalysts (ZNCs) were used to synthesize a commercially available linear low-density polyethylene (LLDPE), widely used in the packaging industry, on an industrial scale. The catalysts differ only in their ability to distribute comonomers between short and long chains. Both catalysts were fully characterized in the first section, and two similar ethylene/1-butene copolymers were made using them. Afterward, the produced copolymers were fully characterized using different techniques; namely, differential scanning calorimetry (DSC), successive self-nucleation and annealing (SSA), oxygen induction time (OIT), melt flow index (MFI), rheometric mechanical spectroscopy (RMS), and a wide range of mechanical experiments. It was revealed that while the presence of comonomers in short chains can reduce their resistance against oxidation (by more than 30%) and can cause a dramatic change in friction coefficients (by more than 20%), some of the other main mechanical properties of the made copolymers were independent of comonomer distribution between long and short chains. In addition, it was shown that ethylenic copolymers' strain hardening modulus (SHM) takes advantage of the homogenous distribution. 相似文献
The effects of spray‐drying air temperature, aspirator rate (drying air mass flow rate), peristaltic pump rate (feed mass flow rate) and spraying air mass flow rate on microencapsulation properties of fish oil including moisture content, particle size, bulk density, encapsulation efficiency and peroxide were investigated. The process was carried out on a mini spray dryer, and skim milk powder was used as the encapsulating wall material. Results indicated that increasing inlet air temperature increased the particle size, encapsulation efficiency and peroxide value but decreased the bulk density and moisture content of product. Increasing aspirator rate resulted in increased particle size and peroxide value but decreased the moisture content and bulk density. Increase in feed mass flow rate increased the moisture content, particle size, bulk density and peroxide value but decreased the encapsulation efficiency of microcapsules. The encapsulation efficiency and bulk density increased with the increasing aspirator rate but moisture content, particle size and peroxide value decreased. 相似文献
In this research, a completely new and accurate method has been presented for detecting periodic activities with the help of machine vision. The proposed method is independent of motion tracking complex algorithms unlike the previous strategies and it is fully independent of contents and types of activities by performing low level calculation. Not using of heavy computations while improving the ability of periodicity detection is regarded as the unique feature of this method. The use of general and flexible framework in this method causes to facilitate the machine vision periodic activities identification process. 相似文献
Renal tubular dysgenesis (RTD) is a very rare malformation, only 24 cases having been described. We present the case of twins born after 28 weeks gestation to a newly-arrived Ethiopian immigrant in whom oligohydramnios was diagnosed when she was admitted. 1 twin had developed polyhydramnios, died before birth and was born with hydrops fetalis. The other newborn suffered from pulmonary distress and anuria, and died 2 days after birth. At autopsy there were no apparent changes in the kidneys or urinary tract, but histological examination showed absence of proximal convoluted tubules. This was attributed to RTD and confirmed by histochemical examination. 相似文献
Studies of the mechanical and optical properties of undrawn polypropylene fibres by annealing and drawing were performed. The optical properties and strain produced in polypropylene fibres at different conditions were measured interferometrically at room temperature. It was found that as the draw ratio of the fibre increased, its birefringence, Δna, increased at a constant rate, and then nearly levelled off. The refractive index, n∥, and polarizability, p∥, increased with different draw ratios; but for fibres annealed at 70 and 100°C, there were no acceptable variations. For fibres annealed at 130°C, n∥ and p∥ increased compared to those fibres annealed at 70 and 100°C. An empirical formula has been suggested to explain the relationship between the cross-sectional area of polypropylene fibres with the draw ratio, and the constants of this formula have been determined. The effect of annealing on the refractive index profile of undrawn polypropylene fibres, before and after thermal treatment, was studied. The strain optical coefficient and the Poisson's ratio were calculated over different draw ratios. The results obtained clarify the effect of annealing time and temperature with different draw ratios on the optical behaviour of polypropylene fibres. Microinterferograms are given for illustration. 相似文献
Aframework for understanding source monitoring and relevant empirical evidence is described, and several related phenomena are discussed: old–new recognition, indirect tests, eyewitness testimony, misattributed familiarity, cryptomnesia, and incorporation of fiction into fact. Disruptions in source monitoring (e.g., from confabulation, amnesia, and aging) and the brain regions that are involved are also considered, and source monitoring within a general memory architecture is discussed. It is argued that source monitoring is based on qualities of experience resulting from combinations of perceptual and reflective processes, usually requires relatively differentiated phenomenal experience, and involves attributions varying in deliberateness. These judgments evaluate information according to flexible criteria and are subject to error and disruption. Furthermore, diencephalic and temporal regions may play different roles in source monitoring than do frontal regions of the brain. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献