Investigation of texture effect on visual colour difference evaluation

The texture effect on visual colour difference evaluation was investigated in this study. Five colour centers were selected and textured colour pairs were generated using scanned textile woven fabrics and colour‐mapping technique. The textured and solid colour pairs were then displayed on a characterized cathode ray tube (CRT) monitor for colour difference evaluation. The colour difference values for the pairs with texture patterns are equal to 5.0 CIELAB units in lightness direction. The texture level was represented by the half‐width of histogram, which is called texture strength in this study. High correlation was found between texture strength and visual colour difference for textured colour pairs, which indicates that an increasing of 10 units of texture strength in luminance would cause a decreasing of 0.25 units visual difference for the five colour centers. The ratio of visual difference between textured and solid colour pairs also indicates a high parametric effect of texture. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 341–347, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

Glauconite Materials from Belarus and Their Application Prospects

An integrated study of glauconite-bearing rocks of the Republic of Belarus has been performed and their main application directions have been identified. The chemical, mineral, and granulometric compositions of these rocks are studied and some of their physicochemical and technological properties are analyzed. __________ Translated from Steklo i Keramika, No. 6, pp. 7 – 9, June, 2005.     

Application of Direct Ignition Technology with Minimum Gasified Oil in Lignite-Fired Boiler

The firing is in the stable condition and the rate of oil saving comes up to 64%, after Fularji Power Plant adopted the technology of minimum gasified oil igniting pulverized lignite directly and the technology of multistage coal combustion with energy amplified stage by stage.     

卵巢也会提前退休

缘何出现卵巢早衰 生活越来越富足的今天，女人为何会遭遇卵巢早衰呢？它的发生与精神压力过大有关吗？也许问题并不是我们想象的那么简单，因为迄今为止，卵巢早衰的病因及发病机理尚不十分清楚，多数学者认为主要有以下几方面原因。     

基于IPC的直流电机控制实验装置设计

介绍了工业控制计算机（IPC）在工业自动化领域中对直流机控制的应用，以工控机作为实验平台。设计了IPC测控系统之一的直流机测控子系统的实验装置，叙述了如何用IPC进行直流机转速的脉冲调宽式（PWM）控制，并通过软件实现在多任务实时操作系统（MROS）申直流机的速度测控和速度曲线绘制。     

吹填粉细砂筑堤实践与研究

岳阳长江干堤是我国第一大河重要堤防,具有重要的战略地位。江南垸堤段每到汛期,堤身散浸,堤后管涌、海底浸不断,根据各方面比选决定采用吹填粉细砂筑堤进行治理。文章对大堤设计断面及排水方案进行拟定并对渗流稳定、堤坡稳定及地震反应进行分析,认为所拟定的加固断面可行,投资省。     

压裂泵往复密封性能及机理研究

根据流体动压润滑理论，对压裂泵柱塞密封摩擦副的润滑机理进行了理论分析。在排出和吸入行程，柱塞密封摩擦副均能满足流体动压润滑的条件，即在柱塞与密封界面上能形成并保持一定厚度的油膜润滑密封，从而达到减小摩擦提高寿命的目的；建立了摩擦界面油膜厚度和泄漏量的计算公式。利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。对往复密封圈沿轴向压力分布、泄漏量随压力变化进行了测试；试验结果表明，建立的计算模型具有较高的计算精度，揭示了压裂泵的密封机理。     

Testing multi-characteristic product capability indices

Recently, studies associated with testing the quality and performance of each process for a product with multi-characteristics are proposed more often. However, most studies are limited to discussing one single type of quality characteristic. Practically, a multi-characteristic product is potentially composed of three types: smaller-the-better, larger-the-better, and nominal-the-best. In this paper, we propose an integrated product capability index which considers these three different types of quality characteristics. According to the theory of testing hypothesis, we develop a testing procedure for the product capability index to judge whether the process capabilities of total quality characteristics meet the customers’ demands. In addition, the relationship between the product capability index and the yield of the entire product will be introduced. Finally, an example is provided as a practical application.     

Automatic ultrastructure segmentation of reconstructed cryoEM maps of icosahedral viruses.

We present an automatic algorithm to segment all the local and global asymmetric units of a three-dimensional density map of icosahedral viruses. This approach is readily applicable to the structural analysis of a broad range of virus structures that are reconstructed using cryo-electron microscopy (cryo-EM) technique. Our algorithm includes three major steps operating on the three dimensional density map: the detection of critical points of the volumetric density function, the detection of global and local symmetry axes, and, finally, the boundary segmentation of all the asymmetric units. We demonstrate the efficacy of our algorithm and report our results on several experimental volumetric datasets, consisting of both reconstructed cryo-EM molecular density maps taken from the European Bioinformatics Institute archive, as well our own synthetically generated (blurred) maps calculated from X-ray resolution molecular structural data taken from the Protein Data Bank.