高炉用氮化硅结合碳化硅制品化学分析方法的研究

确定了高氧化铝含量（０．５％－２０％）的高炉用氮化硅结合碳化硅制品中Ｓｉ３Ｎ４、ＳｉＣ、ｆＳｉ、ＳｉＯ２、Ｆｅ２Ｏ３、Ａｌ２Ｏ３六种化学成分的化学分析方法试验条件．并按条件试验选择了分析方法，进行了精密度、准确度和实际工作的考核，证明了本分析方法可靠、切实可行，能满足科研工作和生产的要求。     

一种基于过零点的时延测量方法

信号传输时间（时延）的测量,是雷达、声纳系统的关键技术之一。本文研究了一种基于过零点的时延测量方法,在建立过零点搜索模型的基础上推导得出时延测量的测量结果表达式;定量分析了高斯白噪声条件下过零点时延测量的测量精度,得到测量误差的理论表达式。仿真与实验表明,过零点时延测量精度与信号频率、过零点数目、信噪比密切相关,当信噪比较高时,其测量精度与经典FFT法相当,而优势在于过零点时延测量的算法简单、计算量小,适用于对实时性要求较高的测量场合。     

网络化雷达协同抗欺骗式干扰技术研究进展

网络化雷达在战场上可以构成全方位、立体化、多层次的战斗体系,因 此对欺骗式干扰对抗具有很大的优越性。本文首先简要介绍了网络化雷达概念,并分析了其 抗干扰优势。根据网络化雷达融合结构不同,将现有协同抗干扰方法分为数据级融合抗欺骗 式干扰和信号级融合抗欺骗式干扰两大类,其中,数据级融合方法进一步分类为点迹关联和 航迹关联两类。本文对各类方法进行了详细介绍,在此基础上,比较分析了数据级融合和信 号级融合两类方法的抗干扰性能及算法复杂度,为抗干扰措施的选择提供依据。最后,针对 现有方法中存在的问题,对网络化雷达协同抗欺骗式干扰的发展趋势进行展望,指出下一步 的研究方向。     

年产200吨4，4’-二氟二苯甲酮（DFBP）的工业化设计及可行性研究

本文在大量实验数据基础上，对4，4’-二氟二苯甲酮(DFBP)进行了年产200吨规模的工业化设计，从技术关键、工艺流程、设备选材、三废治理及成本核算等方面对DFBP工业化设计的可行性进行了评价，该设计有如下特点：工艺简单、合理，操作稳定、安全，三废治理有效，原材料及设备投资少，见效快，适合工业化大生产。     

Catalytic coal partial gasification in an atmospheric fluidized bed

The coal partial gasification catalyzed by limestone, sodium carbonate and dolomite was studied using a bench-scale atmospheric fluidized bed in the presence of air and steam at 900 °C. The effects of limestone, sodium carbonate and dolomite on composition, heating value, gas yield of product gas and carbon conversion in the catalytic coal partial gasification have been examined. The experimental results show that the catalysts can effectively improve the gas quality, the heating value and the gas yield of product gas and carbon conversion. The catalytic effect of sodium carbonate is better than that of limestone and dolomite. The increase of limestone loading can enhance the quality of product gas, such as the content of combustible gas, the high heating value and the gas yield, during coal partial gasification. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

微孔发泡过程中聚合物/超临界CO2均相体系形成的研究

阐述以超临界CO2为发泡剂的微孔发泡中均相体系的形成过程，研究聚合物熔体和气体的混合机理，并分析影响均相体系形成过程的因素。结果表明，聚合物和气体本身的结构和性质、工艺条件、加工设备、外力场等均影响均相体系的形成，振动力场的引入可以提高多相体系的混合程度，在聚合物／气体均相体系的形成过程中引入振动力场是一个全新的研究方向。     

取代2-四氢萘酮的一步合成新方法研究

本文介绍了一步法制备取代2-四氢萘酮的新方法,与常规合成方法相比,该法具有明显的优点:不需要先将羧酸转化成酰氯,避免了三氯化铝以及含氯溶剂的应用,并使催化剂得以循环利用。因此,该方法安全、环保,有望取代常规的付-克反应在工业上的应用。     

改性胶粉/SBR共混胶料的结构性能研究

研究了硫黄、促进剂、改性胶粉用量对胶粉／ＳＢＲ共混胶料性能的影响。结果表明；改性胶粉用量在１０－３５份的范围内．对共混胶料的静态力学性能影响不大：在１０－２２份的范围内对动态压缩疲劳生热影响不大．适当调整基质胶中硫黄、促进剂的用量．有利于降低胶料的动态压缩疲劳生热。扫描电子能谱微区分析的研究表明：由于硫黄的迁移形成了具有特殊结构的界面过渡层．该过渡层是降低动态压缩疲劳生热的关键。     

“中山舰”防腐保护研究

本文叙述了一种互穿网络防腐蚀涂料的性能,根据其试验结果,认为它适宜于作“中山舰”的防腐蚀和保护涂料。     

Influence of epoxy resin on the morphological and rheological properties of PBT/ABS blends compatibilized by ASMA

Polybutylene terephthalate (PBT)/acrylonitrile–butadiene–styrene (ABS) copolymer blends compatibilized by a mixture of styrene–acrylonitrile–maleic anhydride (ASMA) copolymers and epoxy resin (EP) were prepared through melt reactive extrusion. The morphological, rheological, and mechanical properties of these blends were studied. The epoxy functional groups of EP can react with anhydride groups of ASMA and the PBT terminal groups (? OH and ? COOH) simultaneously, leading to the formation of ASMA–EP–PBT graft copolymers. Because of the effective compatibilization of these copolymers at the interface, finer dispersed phase morphologies were obtained. Compared with PBT/ABS/ASMA blends, the addition of EP induced a more stable molten phase structure, with increases of storage moduli, loss moduli, and dynamic viscosities. Results indicated that 1.5 wt% of the EP in the blends was most suited for the compatibilization. Impact properties of these blends were also investigated. POLYM. ENG. SCI., 47:1943–1950, 2007. © 2007 Society of Plastics Engineers