Competitive Cr3+ occupation in persistent phosphors toward tunable traps distribution for dynamic anti-counterfeiting

Red/near infrared (NIR) long persistent phosphors have received extensive attentions in biomedical, food inspection, iris recognition, biological imaging, etc. Herein, a new phosphor, Li₂ZnGe₃O₈:Cr³⁺, is reported with deep red persistent luminescence peaking at 708 nm. By adjusting the Cr³⁺ doping concentration, the competitive site occupation at [ZnO6] and [GeO6] polyhedral enables different traps behaviors including trap types, trap concentration and trap depth, which in turn leads to different afterglow duration time from 2 to 20 h. The persistent luminescence mechanisms originated from different trap models have been discussed, and it is found that they can cooperate or inhibit each other, enabling different luminescence depending on time. The dynamic anti-counterfeiting applications have been demonstrated, which provides a new way to rationally designing for multi-functional luminescent materials.     

UV‐initiated copolymerization route for facile fabrication of epoxy‐functionalized micro‐zone plates

Bisphenol A‐based epoxy acrylate (BABEA), a commercial ultraviolet (UV)‐curable material, was introduced as a new manufacturing material for facile fabrication of epoxy‐functionalized micro‐zone plates through UV‐initiated copolymerization using glycidyl methacrylate (GMA) as the functional monomer. The poly (BABEA‐co‐GMA) was highly transparent in visible range while highly opaque when the wavelength is less than 295 nm, and of high replication fidelity. X‐ray photoelectron spectroscope (XPS) results indicated the existence of epoxy groups on the surface of the poly (BABEA‐co‐GMA), which allowed for binding protein through an epoxy‐amino group reaction. A fabrication procedure was proposed for manufacturing BABEA based epoxy‐functionalized micro‐zone plates. The fabrication procedure was very simple; obviating the need of micromachining equipments, wet etching or imprinting techniques. To evaluate the BABEA‐based epoxy‐functionalized micro‐zone plates, α‐fetoprotein (AFP) was immobilized onto the capture zone for chemiluminescent (CL) detection in a noncompetitive immune response format. The proposed AFP immunoaffinity micro‐zone plate was demonstrated as a low cost, flexible, homogeneous, and stable assay for α‐fetoprotein (AFP). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39787.     

沟槽机筒单螺杆挤出机固体输送产量的粒径模型研究

在分析机筒衬套沟槽槽深、螺杆螺槽槽深和加工物料粒径关系的基础上,建立了沟槽机筒单螺杆挤出机3种常见的固体输送段产量粒径模型,该模型可用于研究机筒衬套沟槽槽深、螺杆螺槽槽深和颗粒物料粒径对固体输送机理的影响并定量计算沟槽机筒单螺杆挤出机固体输送段产量。此外,通过不同的机筒和螺杆组合及不同粒径的原料在自制的在线模拟试验机上对该模型进行了验证和试验分析。     

TPEX材料的制备及性能研究

选取高密度聚乙烯（PE-HD）和耐热聚乙烯（PERT）共混体系进行交联改性得到一种新型的热塑性交联聚乙烯（TPEX）材料,使其即保留PERT的热塑性又因为部分交联提高了其耐热性和抗蠕变性［交联聚乙烯（PEX）］;对TPEX材料进行了拉伸、弯曲、冲击等力学性能的测试;采用定伸热强度和动态热力学分析仪来表征材料的热强度和拉伸蠕变性能。结果表明,当熔体质量流动速率为1~2 g/10 min（21.6 kg）时,其交联度为(2±1) %,TPEX的综合性能较好,可以满足材料加工应用;维卡软化点温度达到126.1 ℃,具有良好的耐热性能; TPEX的定伸热强度大于PERT与PEX,动态热力学分析仪拉伸蠕变测试TPEX与PEX接近,能够满足工程需要。     

浅谈Excel在水泥质量管理中的应用

压力机、全自动水泥氯离子测定仪等仪器导出的文本数据,引入Excel文档中进行检验数据的提取记录与统计分析;物检及分析人员通过共享设置功能实行多人同时编辑台账,实现数据的实时更新;依据不断更新的台账,运用"LOOKUP"函数开具检验报告,效率及准确性大幅度提高。     

分子筛酸性对异丁烷/丁烯烷基化反应性能的影响研究进展

概述分子筛的酸性特点,介绍固体酸催化的异丁烷/丁烯烷基化反应机理,并对已用于异丁烷/丁烯烷基化反应的分子筛情况进行总结,重点阐述分子筛的酸性对烷基化反应性能的影响。结果表明,分子筛应有合适的酸强度,综合来看,中强B酸更有利于反应。今后的机理研究中应当关注L酸及酸位空间分布对烷基化反应的影响。     

Deep Sequencing Analysis of miRNA Expression in Breast Muscle of Fast-Growing and Slow-Growing Broilers

Growth performance is an important economic trait in chicken. MicroRNAs (miRNAs) have been shown to play important roles in various biological processes, but their functions in chicken growth are not yet clear. To investigate the function of miRNAs in chicken growth, breast muscle tissues of the two-tail samples (highest and lowest body weight) from Recessive White Rock (WRR) and Xinghua Chickens (XH) were performed on high throughput small RNA deep sequencing. In this study, a total of 921 miRNAs were identified, including 733 known mature miRNAs and 188 novel miRNAs. There were 200, 279, 257 and 297 differentially expressed miRNAs in the comparisons of WRRh vs. WRRl, WRRh vs. XHh, WRRl vs. XHl, and XHh vs. XHl group, respectively. A total of 22 highly differentially expressed miRNAs (fold change > 2 or < 0.5; p-value < 0.05; q-value < 0.01), which also have abundant expression (read counts > 1000) were found in our comparisons. As far as two analyses (WRRh vs. WRRl, and XHh vs. XHl) are concerned, we found 80 common differentially expressed miRNAs, while 110 miRNAs were found in WRRh vs. XHh and WRRl vs. XHl. Furthermore, 26 common miRNAs were identified among all four comparisons. Four differentially expressed miRNAs (miR-223, miR-16, miR-205a and miR-222b-5p) were validated by quantitative real-time RT-PCR (qRT-PCR). Regulatory networks of interactions among miRNAs and their targets were constructed using integrative miRNA target-prediction and network-analysis. Growth hormone receptor (GHR) was confirmed as a target of miR-146b-3p by dual-luciferase assay and qPCR, indicating that miR-34c, miR-223, miR-146b-3p, miR-21 and miR-205a are key growth-related target genes in the network. These miRNAs are proposed as candidate miRNAs for future studies concerning miRNA-target function on regulation of chicken growth.     

Auxiliary error and probability density function based neuro-fuzzy model and its application in batch processes

This paper focuses on resolving the identification problemof a neuro-fuzzymodel (NFM) applied in batch processes. A hybrid learning algorithm is introduced to identify the proposed NFM with the idea of auxiliary error model and the identification principle based on the probability density function (PDF). The main contribution is that the NFM parameter updating approach is transformed into the shape control for the PDF ofmodeling error.More specifically, a virtual adaptive control systemis constructed with the aid of the auxiliary errormodel and then the PDF shape control idea is used to tune NFM parameters so that the PDF of modeling error is controlled to follow a targeted PDF, which is in Gaussian or uniform distribution. Examples are used to validate the applicability of the proposed method and comparisons are made with the minimum mean square error based approaches.     

软化+微滤膜工艺处理填埋场渗滤液的中试研究

以阜阳市某生活垃圾填埋场渗滤液为研究对象,针对渗滤液高硬度、低碱度的特点,考查软化+微滤膜中试工艺对填埋场总硬度的处理效能,分析微滤膜运行参数对膜通量和产水流量的影响.中试结果表明:软化+微滤膜工艺可有效去除水源中钙镁离子污染问题,控制软化装置的反应池pH在11.5,总硬度(以CaCO3计)的去除率在94％以上,出水总硬度(以CaCO3计)稳定<100 mg/L.软化微滤工艺对渗滤液中COD的平均去除率为16.2％.单支微滤膜正常运行,反洗频率30 min时,可将膜通量恢复至初始通量的90％以上.由中试可知,微滤膜具有良好的抗污染性能,在进膜污泥浓度为4.97 g/L及以上时,初始膜通量仍能保持较高值.