计及三相短路故障的MMC光伏并网系统电压补偿方法

模块化多电平变流器(mudular multilevel converter,MMC)在主电路结构中可以有效提高光伏并网系统的光能利用率。提出了一种光伏电站直流并网方案,通过大功率高变比的有源箝位Boost全桥隔离变换器串联升压,然后经MMC实现光伏高压直流并网。针对光伏并网后交流侧电压的稳定性,提出了基于电压前馈的双闭环控制策略。在MATLAB/Simulink中搭建串联型光伏电站经MMC并网模型,并应用基于电压前馈的双闭环控制策略,验证所提拓扑方案的正确性以及控制策略的可行性。结果表明,控制策略可以在发生三相短路故障时及时补偿电压,提高交流系统侧的可靠性。     

Automated sampling decision scheme for the AVM system

Reducing the sampling rate to as low as possible is a high priority for many factories to reduce production cost. Automatic virtual metrology based intelligent sampling decision (ISD) scheme had been previously developed for reducing the sampling rate and sustaining the virtual metrology (VM) accuracy. However, the desired sampling rate of the ISD scheme is fixed and set manually. Hence, whenever the VM accuracy gets worse, it cannot adaptively increase the default sampling rate in the ISD scheme. As a consequence, it would take more time to collect enough samples for improving the VM accuracy. Moreover, when the VM accuracy performs well all the time, it cannot automatically decrease the default sampling rate in ISD, which may result in unnecessary waste. Accordingly, this paper proposes an automated sampling decision (ASD) scheme to adaptively and automatically modify the sampling rate online and in real time for continuous improvement. The ASD scheme can monitor the VM accuracy online as well as update the VM models in real time for maintaining the VM accuracy when the VM accuracy becomes poor. Also, the ASD scheme can automatically reduce the sampling rate while the VM accuracy performs well.     

石墨烯透明导电薄膜可控制备及实用性研究

新型二维材料石墨烯,因其优异特性被认为是众多领域的理想新型功能材料,其产业化应用是当前及未来的重要研究课题之一。综述了针对性提高石墨烯导电薄膜透光率和导电性能的可控制备的最新研究进展,包括可控制备大尺寸、大面积石墨烯,以及通过掺杂或与其他材料形成复合材料等方法有效提高石墨烯薄膜的光电性能,并对石墨烯透明导电薄膜电极在触摸屏、显示屏等的实用化应用进行了探讨和展望。     

Synthesis of Pt nanocrystals with different shapes using the same protocol to optimize their catalytic activity toward oxygen reduction

Engineering the shape and thus surface structure of Pt nanocrystals is an effective strategy for optimizing their catalytic activities toward various reactions. However, different protocols are typically used to produce Pt nanocrystals with distinctive shapes, making it difficult to directly compare their catalytic activities owing to the complication of surface contamination. Here we demonstrate that Pt nanocrystals with a variety of shapes, including those enclosed with low- or high-index facets, can be synthesized using the same protocol by simply adjusting the concentration of reducing agent and/or the reaction time. Specifically, when the reducing agent was used at a relatively low concentration, Pt truncated cubes, cuboctahedrons, truncated octahedrons, and octahedrons were produced sequentially upon the increase in reaction time. When 67% more reducing agent was used, Pt cubes and concave cubes were obtained consecutively as the reaction time was prolonged. Our quantitative analysis suggests that the diversity of shape and difference in size can be resulted from the difference in reduction kinetics. In evaluating their structure–activity relationship for oxygen reduction, it was established that the high-index facets on Pt concave cubes possessed a specific activity of 6.3 and 1.3 times greater than those of Pt cubes and octahedrons exposed by {1?0?0} and {1?1?1} facets, respectively. This work not only offers a general method for the synthesis of Pt nanocrystals having diverse shapes and thus different types of facets but also highlights the significance of reduction kinetics in controlling the structure evolution of other metal nanocrystals.     

Structure and BIBO stability of a three-dimensional fuzzy two-term control system

A novel three-dimensional fuzzy logic controller (3D FLC) was developed recently for spatially distributed systems. In this study, the inherent spatial structure feature of a 3D FLC with two spatial inputs (also called as 3D two-term FLC) is first exposed via an analytical model. Then, the global bounded-input/bounded-output (BIBO) stability of the 3D fuzzy two-term control system is discussed. A sufficient condition is derived and provided as a useful criterion for the controller design of the 3D two-term FLC. Finally, a catalytic packed-bed reactor is presented as an example of spatially distributed process to demonstrate the effectiveness of the controller.     

基于蓝牙的家居网关数据采集处理系统的设计与实现

介绍了一种基于蓝牙技术的智能家居网关中数据采集处理系统的实现方案,该系统以ARM-Linux嵌入式系统为开发平台;首先讨论了USB蓝牙驱动在ARM9(S3C2410)上的实现和蓝牙协议栈BlueZ的移植;针对家庭环境数据流量较小的特点,采用蓝牙串口操作模式(SPP)建立无线虚拟串口,实现了家庭网关与家居设备之间的无线通信,应用多线程技术实现了家居网关对多个节点设备的实时监控;最后,详细介绍了一种数据包优先级处理算法,实现了对数据包的有效处理,提高了对家居设备监控的效率。     

Geostatistical downscaling of AMSR2 precipitation with COMS infrared observations

This article presents a geostatistical approach for downscaling precipitation products from passive microwave satellites with geostationary Meteorological Satellite observations. More precisely, the Advanced Microwave Scanning Radiometer 2 (AMSR2) precipitation (daily level 3 product) with 0.25° spatial resolution and the Communication, Ocean and Meteorological Satellite (COMS) infrared (IR) data with 5 km spatial resolution were used for the downscaling experiment over the Korean peninsula. Brightness temperature data observed at COMS IR 1 and water vapour channels were incorporated for downscaling via area-to-point residual Kriging with non-linear regression. The evaluation results with densely sampled Automatic Weather Station data revealed that incorporating the COMS IR observations with the AMSR2 precipitation showed similar error statistics to those of the AMSR2 precipitation because of the limitations of IR observations themselves and the inherent errors of the AMSR2 precipitation product over land. However, the area-based evaluation using information entropy indicated that incorporating the COMS observations resulted in more detailed spatial variation in the final product than direct downscaling of the AMSR2 precipitation. In addition, local precipitation patterns could be captured when there were regions with missing precipitation values in the AMSR2 product. Consequently, the downscaling result is useful for understanding the local precipitation patterns with an accuracy similar to that provided by microwave satellite observations. It is also suggested that the spatial variability in the downscaling result and errors in input low-resolution data should be considered when downscaling coarse resolution data using fine resolution auxiliary variables.     

目标提取与哈希机制的多标签图像检索

目的 哈希是大规模图像检索的有效方法。为提高检索精度,哈希码应保留语义信息。图像之间越相似,其哈希码也应越接近。现有方法首先提取描述图像整体的特征,然后生成哈希码。这种方法不能精确地描述图像包含的多个目标,限制了多标签图像检索的精度。为此提出一种基于卷积神经网络和目标提取的哈希生成方法。方法 首先提取图像中可能包含目标的一系列区域,然后用深度卷积神经网络提取每个区域的特征并进行融合,通过生成一组特征来刻画图像中的每个目标,最后再产生整幅图像的哈希码。采用Triplet Loss的训练方法,使得哈希码尽可能保留语义信息。结果 在VOC2012、Flickr25K和NUSWIDE数据集上进行多标签图像检索。在NDCG(normalized discounted cumulative gain)性能指标上,当返回图像数量为 1 000时,对于VOC2012,本文方法相对于DSRH(deep semantic ranking hashing)方法提高24个百分点,相对于ITQ-CCA(iterative quantization-canonical correlation analysis)方法能提高36个百分点;对于Flickr25,本文方法比DSRH方法能提高2个左右的百分点;对于NUSWIDE,本文方法相对于DSRH方法能提高4个左右的百分点。对于平均检索准确度,本文方法在NUSWIDE和Flickr25上能提高25个百分点。根据多项评价指标可以看出,本文方法能以更细粒度来精确地描述图像,显著提高了多标签图像检索的性能。结论 本文新的特征学习模型,对图像进行细粒度特征编码是一种可行的方法,能够有效提高数据集的检索性能。     

An Empirical Study on the Interaction Capability of Arm Stretching

Body-based motion gestures have been gaining popularity in designing interactive systems. However, theories and design guidelines on the use of body movement in design have not been fully evaluated. This article investigates human ability to perform discrete target selection tasks using stretching action through two controlled experiments. The experimental results indicate that: (1) the range of the discrete levels of depth that users can easily discriminate with arm stretching is up to 16 with full visual feedback, but is down to 4 without the feedback; (2) dwelling, a gesture with keeping a hand motionless and the cursor within a target area for a certain amount of time, may be the best gesture for confirmation command; (3) full visual feedback can improve the user performance; and (4) arm stretching action can be modeled using Fitts’ law. We also discuss the design potentials for Stretch Widgets based on these results.