Discovery and characterization of tyrosinases from sea anemone pedal disc

Abstract

The formation of underwater adhesion is a complicated physiological process and many different types of enzymes are found to be essential apart from structural proteins. Previous studies have shown that various tyrosinases were present in marine adhesives, but little information is available about the over-expression and enzymatic characterization of these enzymes. Specifically, this study first identified four significantly up-regulated tyrosinases in the pedal disc of Haliplanella luciae by means of multi-omics technology, and made preliminary bioinformatics predictions. Sequence alignment showed that the Tyr1_Hl contained six conserved His residues that bind to copper ions, of which a tyrosinase with diphenolase activity named as Tyr1_Hl^Δ, was expressed in Escherichia coli BL21 (DE3) cells and purified by affinity chromatography. Enzymatic characterization showed that the activity of Tyr1_Hl^Δ was Cu²⁺ dependent and maximum catalytic activities were in 20?mM Tris–HCl (pH 8.0) at 37?°C. In summary, we identified novel tyrosinases in the pedal disks of sea anemone for the first time and the Tyr1_Hl^Δ was successfully recombinant expressed. Our study will provide basis for future exploration of bio-adhesion mechanism and design of bio-adhesives derived from sea anemones.     

某含锌锡多金属硫化矿石锌浮选试验研究

某含锌锡多金属硫化矿石Zn、Sn、Fe、S含量分别为6.04%、1.05%、29.33%、19.08%,锌主要以铁闪锌矿、闪锌矿的形式存在,锡主要以锡石的形式存在,铁主要以黄铁矿、磁黄铁矿等形式存在,其中的金属矿物共生关系密切,相互包裹现象普遍。为确保不影响后续选锡,对锌浮选流程进行了试验研究。结果表明：矿石在磨矿细度为-0.074 mm占80%的情况下,采用预先脱硫—锌硫混浮再分离流程处理,在选择硫酸铜为锌矿物活化剂、丁基黄药为捕收剂、松醇油为起泡剂、石灰为黄铁矿抑制剂的情况下,经1段脱硫、2粗1扫锌硫混浮、1粗2精锌硫分离,锌硫分离精选尾矿与锌硫混浮扫选精矿2次精选后锌硫分离,最终获得锌精矿Zn品位47.06%、回收率90.76%,试验指标良好。     

GA-BP的铁钢界面铁水温度预测

铁钢界面铁水温度对炼钢生产的控制与优化具有重要意义.因此,为了更加准确地获取铁钢界面铁水温度,本文采用较大样本构建了基于遗传算法(GA)优化的BP神经网络铁水温度预测模型.对影响铁钢界面铁水温度的因素分析,选取了出铁时间、预处理时间、重罐时间、空罐时间、出铁铁水温度、预处理后铁水温度、铁水质量7个关键因素作为模型的输入...     

浅析英法哥特建筑的发展

哥特式建筑于11世纪开始登上历史舞台,它在这个舞台上闪耀了8个世纪,也影响了整个欧洲乃至全世界的建筑风格。文章就英法两国哥特式建筑风格在不同历史背景下的发展和形成原因进行对比分析,并挖掘其历史成因和文化内涵。     

2014年我国热固性工程塑料进展

根据2014年国内公开发表的文献,综述了我国热固性树脂及其塑料的开发研究状况。2014年我国热固性工程塑料的研究开发集中在环氧树脂、聚氨酯和酚醛树脂等大品种树脂的增强增韧及功能化上。利用各种新型树脂或固化剂、无机纳米粒子或功能型助剂等对传统热固性工程塑料的改性取得了较多的成果。     

约束优化控制的约束调整与目标协调及在重油分离器过程中的作用

In this paper, the feasibility and objectives coordination of real-time optimization (RTO) are systemically investigated under soft constraints. The reason for requiring soft constraints adjustment and objective relaxation simultaneously is that the result is not satisfactory when the feasible region is apart from the desired working point or the optimization problem is infeasible. The mixed logic method is introduced to describe the priority of the constraints and objectives, thereby the soft constraints adjustment and objectives coordination are solved together in RTO. A case study on the Shell heavy oil fractionators benchmark problem illustrating the method is finally presented.     

A Wear Detection Parameter for the Wheel–Rail Contact Based on Emitted Noise

This article describes how a wheel–rail wear detection parameter based on noise was developed by running a rapid transit train instrumented with microphones in a depot with a small curve radius. This full-scale test made use of previous knowledge gained from lab-scale tests. The lab- and full-scale tests showed that noise could be used as an indicator of wear transition, when normal wear turns into severe or catastrophic wear. This transition was accompanied by a significant increase in sound pressure and a broader sound pressure amplitude spectrum; that is, a narrow initial amplitude distribution in the normal wear regime and a broader distribution in the severe wear regime. The measured noise from the inner/low and outer/high rails was analyzed in conjunction with the wear from the outer wheel and comparisons were made between cleaned (exposed to severe wear) and lubricated (no wear) rail. Based on those analyses, a wear detection parameter criterion was developed for this specific train. This wear parameter has been implemented in a real-time condition monitoring system so that warnings of the risk for severe wear could be sent to the maintenance department. Validation of the wear parameter and challenges linked to open system conditions are discussed in this article.     

长方体建筑长宽比对屋顶风力机微观选址的影响

采用CFD方法,对长宽比分别为0.25、0.30、0.40、0.50、0.60、0.70、0.80、0.90的8种长方体单体高层建筑物顶面的风流场特征进行模拟计算,确定长宽比对长方体建筑物顶面风力机微观选址的影响.结果表明:长宽比越大,建筑顶面低风速区域越大,且风速随高度增长得越慢,而迎风面拐点风速恢复最快;同时由于建...     

粗生物柴油真空精馏脱硫研究

针对采用废油脂为原料转化制备的生物柴油会含有一定量的硫化物的问题,采用真空精馏法脱除生物柴油中的硫化物,并对硫化物附存形态进行分析。结果表明：生物柴油中硫化物主要包括低沸点的硫化氢、硫醇、硫醚、硫胺素等,以及高沸点的苯并噻吩、二苯并噻吩等。采用控制精馏脱硫塔塔顶温度150 ℃、操作绝对压力300~500 Pa、回流比1的条件下,先对生物柴油中低沸点硫化物进行脱除,再将塔顶温度升至210 ℃,将中间馏分（生物柴油）从塔顶精馏出来,高沸点重馏分（生物重油、高沸点硫化物）留在塔釜底部,两步精馏切割法能将达标的生物柴油与其他馏分分离开来,可有效降低生物柴油的硫含量,脱硫率达97%,满足最新国Ⅵ柴油排放标准（GB 17930—2016）的硫含量≤10 mg/kg要求,且硫含量达标的生物柴油得率达到85%以上。     

乳液聚合法制备石蜡基相变储能材料及热物性研究

将石蜡真空浸渍于膨胀蛭石中,以其共同作为内相,丙烯酰胺水溶液作为外相,制得水包油乳液,引发剂使外相聚合,得到形状稳定的复合相变储热颗粒。测试结果表明：乳化剂和膨胀蛭石分别为石蜡质量的6%和2%时,熔融焓数值为128.79 J/g,石蜡的包覆率为72.80%;复合颗粒的形状是表面规整的球体,颗粒大小均匀;经过100次循环后,熔融焓只降低2.18%;复合颗粒在470 ℃以下有较好的热稳定性。膨胀蛭石与聚丙烯酰胺对石蜡的二次封装可有效提高复合体系防泄露能力,具有可靠的储能和温度调节性能。