Specific substitutions at amino acid 256 of the sarcoplasmic/endoplasmic reticulum Ca2+ transport ATPase mediate resistance to thapsigargin in thapsigargin-resistant hamster cells

High levels of resistance to thapsigargin (TG), a specific inhibitor of intracellular Ca2+ transport ATPases (SERCAs), can be developed in culture by stepwise exposure of mammalian cells to increasing concentrations of TG. We have identified, in two independently selected TG-resistant hamster cell lines of different lineages, mutant forms of SERCA. In the TG-resistant Chinese hamster lung fibroblast cell line DC-3F/TG, a T --> C change at nucleotide 766 introduces a Phe256 --> Leu alteration within the first cytosolic loop of the SERCA. In contrast, in the TG-resistant Syrian hamster smooth muscle cell line DDT/TG 4 microM, a T --> C change at nucleotide 767 introduces a Phe256 --> Ser mutation at that position. When these specific mutations are introduced into a wild-type full-length avian SERCA1 cDNA, transfection experiments reveal that Ca2+ transport function and ATP hydrolytic activity are not altered by such mutations. However, a 4-5-fold resistance to TG inhibition of Ca2+ transport function occurs upon the introduction of either the Phe256 --> Leu or the Phe256 --> Ser mutation into wild-type SERCA1. These specific mutations also render the hydrolytic activity of the ATPase resistant to inhibition by TG. Our results not only implicate amino acid 256 in TG-SERCA interactions, but also demonstrate that specific mutations within SERCA can mediate resistance to TG.     

Kinetics of catalytic esterification of terephthalic acid with methanol vapour

This paper describes the investigations carried out on the kinetics of the solid-gas reaction between terephthalic acid and methyl alcohol in presence of phosphoric acid as the catalyst. As phosphoric acid itself reacts with the alcohol forming methyl phosphates, the kinetic data obtained have been analysed taking this reaction into account. The rate of formation of monomethyl phosphate has been found to be proportional to the square of the mole fraction of the acid present at any instant. The activation energy involved in this reaction is 11.3 kcal/g mole. The data obtained on terephthalic acid esterification show that; (i) the conversion sharply increases with an increase in the catalyst concentration between 30–35 per cent (w/w), (ii) the ‘shrinking particle’ model, proposed by Levenspiel for solid-gas reactions, can be conveniently adapted to represent the reaction, and (iii) the temperature dependency of the reaction follows the Arrhenius law, with activation energy being 11.5 kcal/g mole.     

Amido-Amine-Based Cationic Gemini Surfactants: Thermal and Interfacial Properties and Interactions with Cationic Polyacrylamide

Experimental studies were conducted to investigate thermal and interfacial properties of two in‐house synthesized amido‐amine‐based cationic gemini surfactants namely: dodecanoic acid [3‐({4‐[(3‐dodecanoylamino‐propyl)‐dimethyl‐amino]‐butyl}‐dimethyl‐amino)‐propyl]‐amide dibromide ( 12‐4‐12 ) and dodecanoic acid [3‐({6‐[(3‐dodecanoylamino‐propyl)‐dimethyl‐amino]‐hexyl}‐dimethyl‐amino)‐propyl]‐amide dibromide ( 12‐6‐12 ). Thermogravimetric analysis showed the excellent thermal stability of surfactants and no structural degradation was observed at temperatures up to 250 °C. The long‐term thermal stability of the surfactants was investigated with the aid of spectroscopic techniques such as nuclear magnetic resonance (NMR (¹H and ¹³C) and Fourier transform infrared (FTIR) spectroscopy. Both surfactants were found to be thermally stable, and no changes in structure were observed after aging for 10 days at 90 °C. The interfacial tension of the surfactants was measured at three different temperatures (30, 60, and 80 °C), and the results showed a decrease in interfacial tension with increasing temperature and increasing spacer length of the surfactants. Rheological measurements were used to assess the interactions between the cationic gemini surfactant and cationic polyacrylamide. The addition of cationic surfactant reduced the viscosity and storage modulus of the polymer at low shear rate and frequency due to surfactant–polymer interactions and charge screening. The investigated surfactant–polymer system has great potential in high‐temperature carbonate reservoirs, where conventional anionic surfactants are not recommended due to high adsorption.     

Preparation and characterization of starch-based composite films reinforced by apricot and walnut shells

Starch-based biodegradable films were prepared by using solution-casting method and reinforced by agricultural residues [apricot and walnut shell (APS and WNS) powder]. The powder of both shells was added in different ratios (0, 2.5, 5, 7.5, and 10%) to investigate the microstructures and performances (mechanical and thermal properties) of the starch-based film. Different techniques such as impact, tensile testing, scanning electron microscope, optical microscope (OM), X-ray diffraction (XRD), water vapor transmission rate (WVTR), and dynamic mechanical analysis were applied to study the thermomechanical and barrier properties of the composite films. Results showed that the incorporation of both shells significantly improved the WVTR and mechanical properties of starch-based films. The shells powder was significantly increased the Young's modulus and tensile strength of the starch-based films. Both OM and SEM results showed reasonably good compatibility between starch and reinforced shells. OM and XRD indicated that the APS and WNS not only retained their crystalline structure in the film but they also strengthened the peak intensity of the film. This phenomenon can be used to explain the mechanism of mechanical reinforcement. Since all the components used in the preparation of the films are food grade ingredients, it is expected that the films developed in this work will be used for food packaging applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47978.     

Dynamic modeling of gas phase propylene homopolymerization in fluidized bed reactors

A new model with comprehensive kinetics for propylene homopolymerization in fluidized bed reactors was developed to investigate the effect of mixing, operating conditions, kinetic and hydrodynamic parameters on the reactor performance as well as polymer properties. Presence of the particles in the bubbles and the excess gas in the emulsion phase was considered to improve the two-phase model, thus, considering the polymerization reaction to take place in both the bubble and emulsion phases. It was shown that in the practical range of superficial gas velocity and catalyst feed rate, the ratio of produced polymer in the bubble phase to the total production rate is roughly between 10% and 13%, which is a substantial amount and cannot be ignored. Simulation studies were carried out to compare the results of the improved two-phase, conventional well-mixed and constant bubble size models. The improved two-phase and well mixed models predicted a narrower and safer window at the same running conditions compared with the constant bubble size model. The improved two-phase model showed close dynamic behavior to the conventional models at the beginning of polymerization, but starts to diverge with the evolution of time.     

Computational Fluid Dynamics Modeling for Urea Hydrolysis in a Batch Reactor for Flue Gas Conditioning

A computational fluid dynamics (CFD) model is proposed to simulate urea hydrolysis for ammonia synthesis as a safe feed stock to flue gas conditioning in thermal power plants. A series of parametric studies to investigate flow rates, thermal boundary conditions, and reactor geometry was performed and operating conditions and reactor geometry were optimized. Detailed 3D flow, heat, and chemistry simulations of ammonia were carried out with predicted conversions comparable to measurements and the dependence of the experiments on the reaction parameters was evaluated. Through simulation under the same conditions the output was generated and compared to the experimental plot. Profiles of temperature and flow patterns were successfully achieved through simulation.     

PROCESS CONTROL PERSPECTIVE FOR PROCESS ANALYTICAL TECHNOLOGY: INTEGRATION OF CHEMICAL ENGINEERING PRACTICE INTO SEMICONDUCTOR AND PHARMACEUTICAL INDUSTRIES

FDA's Process Analytical Technology (PAT) initiative provides an unprecedented opportunity for chemical engineers to play significant roles in the pharmaceutical industry. In this article, the authors provide their perspectives on (1) the need for chemical engineering principles in pharmaceutical development for a thorough process understanding; (2) applications of chemical engineering principles to meet the challenges from the semiconductor and pharmaceutical industries; and (3) the integration of chemical engineering practice into the semiconductor and pharmaceutical industries to achieve process understanding and the desired state of quality-by-design. A real-world case study from the semiconductor industry is presented to demonstrate how a classic chemical engineering concept, mixing homogeneity, can be implemented by inducing forced flow to ensure an excellent copper electrochemical plating process performance and to improve product quality substantially. Further, a case study of brake system design is discussed with the concept of Dr. Taguchi's robust engineering design to illustrate how quality-by-design can be achieved through appropriate experimental design, in conjunction with the discussion on the concept of quality-by-design in pharmaceuticals. Third, a case study of freeze-dried sodium ethacrynate is presented to demonstrate the vital importance of controlling the processing factors to achieve the desired product stability. Finally, the problems of the current pharmaceutical manufacturing mode, the opportunities and engineering challenges during implementation of PAT in the pharmaceutical industry, and the role of chemical engineering in implementation of PAT is discussed in detail.