Hydrothermal synthesis of α-SnWO4: Application to lithium-ion battery and photocatalytic activity

The high capacity anode material is required to replace the most commonly used anode - graphite to keep up the global demand to achieve the goal. Multi-metal oxide has gained keen attention for its higher theoretical capacity and relatively stable than a single metal oxide. α-SnWO₄ has a theoretical capacity of 850 mAh g^?1 which is greater than graphite (372 mAh g^?1). α-SnWO₄ has been synthesized through low-temperature hydrothermal method using tin chloride and sodium tungstate as a precursor in acidic medium (succinic acid) at 200 °C for 12 h. The obtained product has been characterized using various analytical tools such as XRD, FT-IR, UV-DRS, BET, PL, SEM, and HR-TEM. XRD analysis shows the orthorhombic phase with a crystallite size of ~25 nm α-SnWO₄has been examined as an electrode material for Li-ion battery (LIB) and displays an initial discharge capacity of 985 mAh g^?1. Columbic efficiency close to 100% has been observed for 100 cycles. The stability of the electrode material was studied at different C-rates. Band-gap calculated using UV-DRS (Eg = 1.9 eV) shows that α-SnWO₄ is a good candidate for photocatalytic degradation. Results of the photocatalytic experiment using methylene blue (MB) as a model pollutant in an aqueous medium shows good results. The above applications show that α-SnWO₄ is multifunctional materials for diverse applications.     

Characterization of Waste and Reclaimed Green Sand Used in Foundry Processing

Silicon - The aim of this study is to discuss the importance of characterization of green, waste green and reclaimed sand. The transformations and changes which take place in the green sand, are...     

Varna-based optimization:a novel method for capacitated controller placement problem in SDN

Recently,software defined networking(SDN)is a promising paradigm shift that decouples the control plane from the data plane.It can centrally monitor and control the network through softwarization,i.e.,controller.Multiple controllers are a necessity of current SDN based WAN.Placing multiple controllers in an optimum way is known as controller placement problem(CPP).Earlier,solutions of CPP only concentrated on propagation latency but overlooked the capacity of controllers and the dynamic load on switches,which is a significant factor in real networks.In this paper,we develop a novel optimization algorithm named varna-based optimization(VBO)and use it to solve CPP.To the best of our knowledge,this is the first attempt to minimize the total average latency of SDN along with the implementation of TLBO and Jaya algorithms to solve CPP for all twelve possible scenarios.Our experimental results show that TLBO outperforms PSO,and VBO outperforms TLBO and Jaya algorithms in all scenarios for all topologies.     

Live video streaming service with pay-as-you-use model on Ethereum Blockchain and InterPlanetary file system

Wireless Networks - In centralized video streaming platforms, the platform owner, rather than the content producer, controls most of the content uploaded on the centralized video...     

A survey and classification of controller placement problem in SDN

Software defined networking emerges as a promising paradigm shift that decouples the control plane from the data plane. It has the ability to centrally monitor and control the network through softwarization, ie, controller. Deploying a single controller is inefficient to handle large network traffic; thereby, making multiple controllers are a necessity of current software defined networking in wide area networks. Placing multiple controllers in an optimum way, ie, controller placement is a vibrant research problem. Controller placement problem (CPP) is of twofold: the minimum number of controllers to be placed in a network and locations of these controllers. Numerous researchers in the last 5 years (2012 to November 2017) have proposed solutions for the CPP, which is an NP‐hard problem. In general, solutions are based on objective functions and their optimum solutions considering various factors (such as propagation latency between switches and controllers, and intercontrollers) and constraints (such as the capacity of controllers and switches). To the best of our knowledge, this is the first attempt of state‐of‐the‐art review on CPP. This paper classifies the CPP, critically analyzes the existing solutions, and finds limitations and future scope existing, which will help potential researchers in this area to innovate new solutions for CPP lying on this information.     

Security Attacks in Named Data Networking: A Review and Research Directions

Journal of Computer Science and Technology - Contents such as audios, videos, and images, contribute most of the Internet traffic in the current paradigm. Secure content sharing is a tedious issue....     

Formal modeling and verification of software‐defined networks: A survey

Unlike traditional networking devices, control and management plane are decoupled from data plane in software‐defined networks (SDN). The logically centralized control and management plane facilitate dynamic orchestration of network resources, services, and policies by writing software programs. This provides much needed flexibility and programmability where networking rules and policies can be modified dynamically depending upon the application context. As the operation of network services entirely depends on a program, a small fault may induce several issues which can adversely affect the expected behavior of the network. Formal modeling and verification help in catching inconsistencies and existence of errors prior to the deployment of the programs that control the behavior of a network. In this paper, we provide a comprehensive survey of tools and techniques available in the literature for formal modeling and verification of SDN. These tools and techniques are classified based on their types, the components of SDN where they can be applied, and the design and development phase when they are utilized. In particular, their respective benefits and limitations are discussed in terms of ease of use, interfaces, and the ability to capture and verify intended network properties.     

A compact four‐element MIMO antenna for WLAN/WiMAX/satellite applications

This paper presents a four‐element wideband monopole MIMO antenna. Initially, a single‐element wideband CPW‐fed antenna is designed operating in the range of 4.30 to 6.45 GHz. Using this design, an approach towards MIMO structure is studied. A two‐element structure is designed keeping them adjacent to each other, and the isolation between the antennas is observed. After which, a four‐element structure is designed having the best orientation in order to achieve good isolation between the antenna elements. The proposed antenna configuration has four identical CPW‐fed elements. The proposed configuration has a fractional bandwidth of 40.27% and has a simulated peak gain of 5.5 dBi. This antenna is intended to be used for WLAN, WiMAX, and satellite bands of range corresponding to 4.70–6.19, 5.5–5.7, and 5–6 GHz. All the necessary antenna simulations are simulated using Ansys HFSS and verified on NI AWR Design Environment. The fabricated model of the proposed design is measured for its performance parameters and validated.     

Growth,characterizations, and the structural elucidation of diethyl-2-(3-oxoiso-1,3-dihydrobenzofuran-1-ylidene)malonate crystalline specimen for dielectric and electronic filters,thermal, optical,mechanical, and biomedical applications using conventional experimental and theoretical practices

Journal of Materials Science: Materials in Electronics - The single crystals of diethyl-2-(3-oxoiso-1,3-dihydrobenzofuran-1-ylidene) malonate (D23DYM) were grown successfully and efficiently by the...     

Epoxy-based anticorrosive coating developed with modified poly(<Emphasis Type="Italic">o</Emphasis>-anisidine) and depolymerized product of PET waste

Poly(o-anisidine) (POA) is used as a modifier in an epoxy system to enhance its anticorrosive properties. The modification of POA is done by aminosilane to introduce amine functionality on the surface. Through this functionality, it becomes part of the coating backbone during curing of an epoxy-polyaminoamide system. The concentration of poly(o-anisidine) has been varied as 1, 3, and 5 wt%. Depolymerized product of polyethylene terephthalate (PET) obtained from aminolysis of PET with ethylamine has amine functionality. Depolymerized product is added at concentrations of only 1 and 3 wt%. The same concentration is used with 5 wt% of silane-modified POA. The synthesized POA and silane-modified POA (Si-POA) have been characterized by FTIR, UV–Visible, and XRD analysis. The coating is characterized by mechanical properties and it is observed that pencil hardness and scratch hardness of the coating were enhanced to 6H and 3.5 kg from 2H and 2.5 kg of a plain epoxy system. The anticorrosive properties of Si-POA are better as compared to plain POA, but the addition of depolymerized product is unable to improve the anticorrosive performance of the coating. In EIS study, it is observed that 5% Si-POA system shows the highest impedance > 10 G (Ω) and it has a tendency to retain anticorrosive performance for longer duration.