Hydrothermal preparation of ZnO:CNT and TiO<Subscript>2</Subscript>:CNT composites and their photocatalytic applications

ZnO:CNT and TiO₂:CNT composites were fabricated under mild hydrothermal conditions (T = 150–240 °C) with an autogenous pressure. The as prepared composites were characterized using X-ray diffraction, Scanning electron microscopy and FTIR spectroscopy. Photocatalytic applications of the composites were investigated using indigo caramine dye. The effect of the catalyst content, pH of the medium, source and intensity of illumination on the photodegradation of the indigo caramine dye was studied and the efficiency of the composites were investigated based on different parameters like percent transmittance (%T), percent decomposition, and chemical oxygen demand of the dye solution to obtain optimum treatment conditions. The results obtained exhibit higher photocatalytic activity when compared to the reagent grade ZnO, TiO₂ and hydrothermally prepared ZnO:AC and TiO₂:AC composites.     

Characterization and Formation Mechanism of Six Pointed Star-Type Stacking Faults in 4H-SiC

Synchrotron white-beam x-ray topography (SWBXT) studies of defects in 100-mm-diameter 4H-SiC wafers grown using physical vapor transport are presented. SWBXT enables nondestructive examination of thick and large-diameter SiC wafers, and defects can be imaged directly. Analysis of the contrast from these defects enables determination of their configuration, which, in turn, provides insight into their possible formation mechanisms. Apart from the usual defects present in the wafers, including micropipes, threading edge dislocations, threading screw dislocations, and basal plane dislocations, a new stacking fault with a peculiar configuration attracts our interest. This fault has the shape of a six-pointed star, comprising faults with three different fault vectors of Shockley type. Transmission and grazing topography of the fault area are carried out, and detailed contrast analysis reveals that the outline of the star is confined by 30° Shockley partial dislocations. A micropipe, which became the source of dislocations on both the basal plane slip system and the prismatic slip system, is found to be associated with the formation of the star fault. The postulated mechanism involves the reaction of 60° dislocations of a/3 〈 $ \bar{2}110 $ 〉 Burgers vector on basal plane and pure screw dislocations of a/3 〈 $ 11\bar{2}0 $ 〉 Burgers vector on prismatic plane and cross slip of the partial dislocation from prismatic plane to basal plane leading to expansion of the faults.     

Hybrid Devices by Selective and Conformal Deposition of PtSe2 at Low Temperatures

2D materials display very promising intrinsic material properties, with multiple applications in electronics, photonics, and sensing. In particular layered platinum diselenide has shown high potential due to its layer-dependent tunable bandgap, low-temperature growth, and high environmental stability. Here, the conformal and area selective (AS) low-temperature growth of layered PtSe₂ is presented defining a new paradigm for 2D material integration. The thermally-assisted conversion of platinum which is deposited by AS atomic layer deposition to PtSe₂ is demonstrated on various substrates with a distinct 3D topography. Further the viability of the approach is presented by successful on-chip integration of hybrid semiconductor devices, namely by the manufacture of a highly sensitive ammonia sensors channel with 3D topography and fully integrated infrared-photodetectors on silicon photonics waveguides. The presented methodologies of conformal and AS growth therefore lay the foundation for new design routes for the synthesis of more complex hybrid structures with 2D materials.     

Type I Interferon α/β Receptor-Mediated Signaling Negatively Regulates Antiviral Cytokine Responses in Murine Bone-Marrow-Derived Mast Cells and Protects the Cells from Virus-Induced Cell Death

Mast cells (MCs) are critical for initiating inflammatory responses to pathogens including viruses. Type I interferons (IFNs) that exert their antiviral functions by interacting with the type I IFN receptor (IFNAR) play a central role in host cellular responses to viruses. Given that virus-induced excessive toxic inflammatory responses are associated with aberrant IFNAR signaling and considering MCs are an early source of inflammatory cytokines during viral infections, we sought to determine whether IFNAR signaling plays a role in antiviral cytokine responses of MCs. IFNAR-intact, IFNAR-blocked, and IFNAR-knockout (IFNAR^−/−) bone-marrow-derived MCs (BMMCs) were treated in vitro with a recombinant vesicular stomatitis virus (rVSVΔm51) to assess cytokine production by these cells. All groups of MCs produced the cytokines interleukin-6 and tumor necrosis factor-α in response to rVSVΔm51. However, production of the cytokines was lowest in IFNAR-intact cells as compared with IFNAR^−/− or IFNAR-blocked cells at 20 h post-stimulation. Surprisingly, rVSVΔm51 was capable of infecting BMMCs, but functional IFNAR signaling was able to protect these cells from virus-induced death. This study showed that BMMCs produced pro-inflammatory cytokines in response to rVSVΔm51 and that IFNAR signaling was required to down-modulate these responses and protect the cells from dying from viral infection.     

Analysis of the switching speed of BiCMOS buffer under high current

A nonlinear analytical transient response model that is suitable for BiCMOS driver circuits operating under the Kirk and Van der Ziel effect is presented. The model accounts for both base vertical push-out and lateral stretching phenomena where the forward transit time τ _f has a square law dependence on the collector current. Based on the new transient model, a closed-form BiCMOS delay expression is derived that shows excellent agreement with measured gate delay from a 0.8-μm BiCMOS technology. The comparison is made for a wide range of circuit parameters. The delay model can be used to develop timing analyzers, timing simulators, and circuit optimization tools for ULSI circuit design. As an application of the delay model, a circuit design algorithm is derived to optimize the speed-area performance of the BiCMOS buffers     

Cross-layer optimization for wireless mesh networks with smart antennas

A cross-layer optimization framework for wireless mesh networks is presented where at each node, various smart antenna techniques such as beam-forming, spatial division multiple access and spatial division multiplexing are employed. These techniques provide interference suppression, capability for simultaneous communication with several nodes and transmission with higher data rates, respectively, through multiple antennas. By integrating different combinations of the multi-antenna techniques in physical layer with various constraints from MAC and network layers, three Mixed Integer Linear Programming (MILP) models are presented to minimize the system activation time. Since these optimization problems are complex combinatorial, the optimal solution is approached by a Column Generation decomposition method. The numerical results for different network scenarios with various node densities, number of antennas, transmission ranges and number of sessions are provided. It is shown that the resulted directive, multiple access and multiplexing gains combined with scheduling, effectively increase both the spectrum spatial reuse and the capacity of the links and therefore, enhance the achievable system throughput. Our cross-layer approach is also extended to consider heterogeneous networks and we present a multi-criteria optimization framework to model the design problem where the objective is to jointly minimize the cost of deployment and the system activation time. Our results reveal the benefits of joint design in terms of reducing the cost of deployment while achieving higher system performance.     

Concept of stress dead zone in cracked plates: Theoretical,experimental, and computational studies

This paper presents a study on stress dead zone implications and its characterization with uniaxial tensile testing on MT polycarbonate plate specimens. To obtain the experimental solution, digital image correlation (DIC) is used. Numerically, based on LEFM, the problem is solved using advanced discretization techniques, finite element, and meshless methods. Considering stress dead zone notion, it aims to determine alternative analytical solution of the SIF. Thus, the compliance method is adopted, which is associated with the specimen's dead zone region that does not involve the cracking resistance. Hence, LEFM formulations complying with strain energy release rate criterion are assumed. A proper comparison is made amongst results obtained from all theoretical, experimental, and numerical analyses. Furthermore, this work focuses on the variational fields' evaluation and, in particular, verification on the theoretical assumption of dead zone characteristics. The obtained results support adopted methodologies and are encouragingly robust and cost‐effective.     

Correction to: Salient object detection using the phase information and object model

Multimedia Tools and Applications - The article Salient object detection using the phase information and object model, written by Hooman Afsharirad and Seyed Alireza Seyedin, was originally...