Biocompatibility and microscopic evaluation of polyurethane–poly(methyl methacrylate)–titnanium dioxide based composites for dental applications

We prepared and then blended polyurethanes (PUs) with poly(methyl methacrylate)s (PMMAs) and TiO₂ by varying the percentage compositions to form pellets. The chemistry of all of the blended samples was confirmed by Fourier transform infrared spectroscopy. The incorporation of TiO₂ into the PU–PMMA matrix was confirmed with scanning electron microscopy analysis. Differential scanning calorimetry analysis and compression testing was performed, and the results are discussed. The cytotoxicity level of the prepared blends displayed dependence on the composition ratio of the PU–PMMA blends. The results reveal that the optimum PU contents in the PU–PMMA–TiO₂ blend were responsible for its better biocompatibility. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39806.     

Pollen diversity and its implications to the systematics of mimosaceous species by LM and SEM

In this study we have discussed pollen morphology of 14 mimosaceous species belonging to five genera by using light microscopy (LM) and scanning electron microscopy (SEM). The palynological features of species were determined by both qualitative and quantitative characters. The qualitative characters include pollen shape, colpi arrangement, and exine sculpturing. Oblate spheroidal shaped pollens were noted in Albizia procera, Albizia lebbeck, Acacia tortilis, Acacia ampliceps, and Acacia modesta, subprolate shaped pollen in Leucaena leucocephala, Prosopis julifera, and Acacia nilotica, prolate pollen in Acacia farnesiana and Prosopis glandulosa while spheroidal, sub spheroidal and sub oblate pollen grains were observed in Acacia catechu, Mimosa himalayana, Prosopis cineraria, respectively. Sparsely foveolate, reticulate, scabrate, and scrobiclate exine sculpturing were observed. Colpi with sunken ornamentation were seen in P. cineraria, P. glandulosa, P. juliflora, and L. leucocephala while colpi were absent in rest of the studied species. The quantitative characters were statistically studied using SPSS software. The current study gives important morpho‐palynological characters for identifying and validation of close related and similar taxa which will aid to the phylogenetic analysis of Mimosaceae family.     

Determination of molar mass distribution of tapioca starch using asymmetrical flow field flow fractionation

The apparent average molar masses (M_w,app) and apparent average radii of gyration (R_g,app) of native tapioca starch and fractions were determined using asymmetrical flow field flow fractionation (AF4) coupled with multi‐angle light scattering and RI detectors (AF4/MALS/RI). AM‐type (Fraction A) and AP‐type (Fraction B) were chemically separated from native tapioca starch. Native tapioca starch and Fractions (A and B) were dissolved in 1 M KSCN using a high pressure microwave vessel. The effect of varying cross flow rates at a fixed channel flow rate upon the M_w,app and R_g,app distributions of native tapioca starch and Fractions (A and B) were investigated. The average M_w,app values for native tapioca starch, Fraction (A) and Fraction (B) were 59 × 10⁶, 2.1 × 10⁶ and 19 × 10⁶ g/mol, respectively, with average R_g,app values of 165, 73 and 87 nm, respectively. Hydrodynamic radii (R_h) values for native tapioca starch and fractions were determined directly from AF4 experimental parameters.     

Microscopic characterization of petiole anatomy of Asteraceous taxa of Western Himalaya-Pakistan

Petiole anatomy of 15 species of family Asteraceae was examined which aimed to investigate petiolar anatomical structures for species level identification. Shandon Microtome was used for petiole histological preparations. Both qualitative and quantitative features were studied under microscope which showed significant variation in petiole, collenchyma, parenchyma shape/size, vascular bundles arrangement/size, and vessel elements quantity. Artemisia japonica Thunb., Cirsium vulgare (Savi) Ten., Myriactis nepalensis Less., Seriphidium brevifolium Ling & Y.R.Ling, Taraxacum officinale (L.) Weber ex F.H.Wigg., and Xanthium strumarium L. showed winged petioles. Maximum length and width of upper and lower epidermis was found in Tagetes erecta L. which is 23.05 ± 0.89 μm, 24.9 ± 1.257 μm length and 21.75 ± 1.38067 μm, 22.75 ± 0.467 μm width, respectively. Petioles of Parthenium hysterophorus L. was longest one with 9.85 ± 10.45 μm while A. japonica Thunb. showed highest number of vessel elements. Maximum size of vascular bundles was found in T. erecta L. with 5.05 ± 14.25 μm. Artemisia annua L., C. vulgare (Savi) Ten, Cyanthillium cinereum (L.) H.Rob., Helianthus annus L., M. nepalensis Less., P. hysterophorus L., Senecio chrysanthemoides DC. have trichomes while Tussilago farfara L. has highest number of vascular bundles. All species have angular collenchyma type except M. nepalensis Less., P. hysterophorus L., S. brevifolium Ling & Y.R.Ling, Tagetes minuta L., T. officinale L., S. chrysanthemoides DC., and T. farfara L. Cluster analysis implemented that distinct plant species in cluster. Petiolar anatomical structures and taxonomic key will helpful for distinguishing Asteraceous taxa at genus and species level. This taxonomic significant investigation will also provide baseline to taxonomists for other Asteraceae studies and phylogenetic research.     

Identification of novel,non-edible oil seeds via scanning electron microscopy as potential feedstock for green synthesis of biodiesel

In the present era, environmental glitches associated with extensive emission of greenhouse gases (GHG) and energy crises caused by exhausting fossil fuel reservoirs has diverted researcher's interest toward alternative and renewable energy sources. Biodiesel is a renewable, biodegradable, and sustainable alternative to petro-diesel. Biodiesel synthesized from non-edible seed oils is preferred due its cost effectiveness and eco-friendly nature. Hence, our present study focused on investigation and identification of micromorphological characters of six novel, non-edible seed oil feedstock for biodiesel production via scanning electron microscopy (SEM). Results of light microscopy of seeds revealed distinct variation in seed size (15.8–1.8 mm in length and 9.4–1.1 in width), shape (round to Cuneiform), and color (from black to yellowish green). Non-edible seed oil content fall in range of 28–38% (wt/wt). Free fatty acid (FFA) content varied from 0.56 to 2.06 mg KOH/g. Multivariate analysis was performed to investigate correlation between three significant variables of seed oil yielding feedstock such as potential for biodiesel synthesis, oil content, and FFA content via principal component analysis. Ultra morphological investigation of seeds surfaces via SEM exhibited distinctive variation in surface sculpturing, cell arrangement, cell shape, periclinal wall shape, margins, protuberances, and anticlinal wall shape. Seed surface sculpturing varied from reticulate, semitectate, wrinkled, rugose, papillate, perforate, and striate. Periclinal wall arrangements confirmed variation from glabrous, raised, depressed, elevated, smooth, pentagonal, entire, and ripple margins. Whereas, anticlinal walls pattern demonstrated variation from angular, smooth, wavy, deep, dentate, entire, irregular, puzzled, elongated, curved, and depressed. Finally, it was concluded from obtained results that SEM could be a possible useful tool in disclosing veiled micromorphological characters of non-edible oil yielding seeds, which provides useful information to researchers for their correct, authentic identification, and classification in modern synthetic system.     

Blends of polyurethane-polymethyl methacrylate/TiO2-based composites

Polyurethanes (PUs) prepolymer was prepared by the reaction of toluene-2,4-diisocyanate (TDI) and poly caprolactone diols and the chain was further extended with 1,4-butane diol (1,4-BDO) to get final polyurethane (PU). FTIR spectra of the monomers, PU prepolymer, chain extender and final PU confirmed the reaction progress. A series of blends were prepared by varying the percent compositions of prepared PU, procured polymethyl methacylates (PMMA) and titanium dioxide (TiO₂). Pellets were formed from the prepared blends (PU-PMMA/TiO₂) using a self-designed mechanical tool. Scanning electron microscope (SEM) images were also taken to confirm the incorporation of the TiO₂ contents into the prepared blends. Mechanical properties such as hardness and compressive strength were studied and discussed. The results of the study reveal that the blended sample having 80% PU, 20% PMMA content with 2.5 g TiO₂ in 100 g mixture of PU and PMMA is very suitable for suggesting dental materials.     

Palyno‐anatomical studies of monocot taxa and its taxonomic implications using light and scanning electron microscopy

Palyno‐anatomical study of monocots taxa using Light and Scanning Electron Microscopy (SEM) was first time conducted with a view to evaluating their taxonomic significance. Studied plants were collected from different eco‐climatic zones of Pakistan ranges from tropical, sub‐tropical, and moist habitats. The aim of this study is to use palyno‐anatomical features for the correct identification, systematic comparison, and investigation to elucidate the taxonomic significance of these features, which are useful to taxonomists for identifying monocot taxa. A signification variation was observed in quantitative and qualitative characters by using the standard protocol of light microscopy (LM) and SEM. Epidermal cell length varied from maximum in Allium griffthianum (480 ± 35.9) μm at the adaxial surface to minimum in Canna indica (33.6 ± 8.53) μm on abaxial surface. Maximum exine thickness was observed in Canna indica (4.46) μm and minimum in Allium grifthianum (0.8) μm. Variation was observed in shape and exine ornamentation of the pollen, shape of the epidermal cell, number, size, and type of stomata, guard cell shape, and anticlinal wall pattern. Based on these palyno‐anatomical features a taxonomic key was developed, which help in the discrimination of studied taxa. In conclusion, LM and SEM pollen and epidermal morphology is explanatory, significant, and can be of special interest for the plant taxonomist in the correct identification of monocots taxa.