On the reliability of Landsat TM for estimating forest variables byregression techniques: a methodological analysis

In order to build models that relate thematic mapper (TM) imagery to field forest variables, several regression techniques, such as the ones based on the Mallows' C_p and the adjusted R² statistics, were applied. Nevertheless, although the best created models had good fittings (R²>0.65) apparently supported by a clear statistical significance (p<0.0001), later trials tested with additional plots showed that these models were, in fact, nonrobust models (models with very low-predictive capabilities). Two factors were pointed out as causes of these inconsistencies between predicted and observed values: a relatively small number of available field plots and a relatively high number of possible independent variables. Actually, different trials suggested much lower fittings for the expected “really” predictive models. Some restrictions of TM satellite data, such as its radiometric, spectral, and spatial limitations, together with restrictions arising from gathering and processing of field data, might have led to these poor relations. This study shows the need for guarantees stronger than the usual ones before concluding that there is a clear possibility of using satellite information to estimate forest parameters by means of regression techniques     

DIRECT RESONANCE OF TURBULENT BOUNDARY LAVER OVER COMPLIANT WALLS

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｍａｉｎｇｏａｌｏｆｔｈｉｓｐａｐｅｒｉｓｔｏｅｘｐｌｏｒｅｔｈｅｐｏｓｓｉｂｉｌｉｔｙｔｏｌｅａｒｎｍｏｒｅａｂｏｕｔｔｈｅｍｅｃｈａｎｉｓｍｏｆｔｕｒｂｕｌｅｎｔｂｏｕｎｄａｒｙｌａｙｅｒｆｌｏｗｉｎｔｅｒａｃｔｉｏｎｓａｎｄｉｔｓｅｆｆｅｃｔｓｏｎｃｏｍｐｌｉａｎｔｗａｌｌｐｅｒｆｏｒｍａｎｃｅ．Ｔｈｅｒｅａｒｅｃｅｒｔａｉｎｐｒｅｒｅｑｕｉｓｉｔｅｃｏｎｄｉｔｉｏｎｓｔｏｆｕｒｔｈｅｒｔｈｅｓｔｕｄｙｏｎｔｈｅｍｅｃｈａｎｉｓｍ，ｉ．ｅ．ｔｈｅｃｏ…     

Computation of the stability radius of a Schur polynomial: an orthogonal projection approach

The robust Schur stability of a polynomial with uncertain coefficients will be investigated. A formula for the stability radius of a Schur polynomial is established. The result is the counterpart of [1] for linear discrete-time systems     

Self and mutual admittance of slot antennas on a dielectric half-space

In this paper, an efficient implementation of the spectral domain moment technique is presented for computing the self and mutual coupling between slot antennas on a dielectric half-space. It is demonstrated that by the proper selection of the weighting functions in the method of moments, the analytic evaluation or simplification of the transverse moment integrals is enabled. This results into a significant reduction of the required computational labor. The method is then utilized in order to provide design data for the self and mutual admittances between two slot antennas on a dielectric substrate lens in the case of fused quartz (∈ _r =3.80), crystal quartz (∈ _r =4.53), silicon (∈ _r =11.9) and GaAs (∈ _r =12.8). The presented technique and associated results are useful when designing twin slot quasi-optical receivers, imaging arrays, phased arrays or power-combining arrays of slot elements at millimeter-wave frequencies.     

Analysis of volatiles evolved during high-temperature treatment of thermally stable polymers. I. Nitrogen-containing acetylene-terminated resin

Cured samples of a nitrogen-containing acetylene-terminated resin, N,N′-(1,3-phenylene-dimethylidene)bis(3-ethynylaniline), have been heated at 10°C/min up to 900°C in a pyroprobe attached to a gas chromatograph/mass spectrometer (GC/MS). Analysis of the volatiles evolved during heating identified both gases and higher boiling compounds. The major higher boiling compounds are benzene, toluene, xylene, aniline, benzonitrile, m-methylaniline, and m-methylbenzonitrile; the gases include ammonia, methane, and traces of carbon dioxide. Correlations between sample temperature and the evolution of each of these compounds have been made. The onset of all volatile formation occurs between 450 and 500°C. The higher boiling volatiles peak, then end by approximately 700°C, while the gases peak then fall off but are still being evolved at 900°C. Average weight loss measurements of 13.6% at 700°C and 15.7% at 900°C agree with previously published thermogravimetric analysis (TGA) data. © 1993 John Wiley & Sons, Inc.     

Prolog/Rex-a way to extend Prolog for better knowledgerepresentation

Prolog/Rex represents a powerful amalgamation of the latest techniques for knowledge representation and processing, rich in semantic features that ease the difficult task of encoding heterogeneous knowledge of real-world applications. The Prolog/Rex concept mechanism lets a user represent domain entities in terms of their structural and behavioral properties, including multiple inheritance, arbitrary user-defined relations among entities, annotated values (demons), incomplete knowledge, etc. A flexible rule language helps the knowledge engineer capture human expertise and provide flexible control of the reasoning process. Additional Prolog/Rex strength that cannot be found in any other hybrid language made on top of Prolog is language level support for keeping many potentially contradictory solutions to a problem, allowing possible solutions and their implications to be automatically generated and completely explored before they are committed. The same mechanism is used to model time-states, which are useful in planning and scheduling applications of Prolog/Rex     

Partial indexing for nonuniform data distributions in relationalDBMS's

It is well known that the effectiveness of relational database systems is greatly dependent on the efficiency of the data access strategies. For this reason, much work has been devoted to the development of new access techniques, supported by adequate access structures such as the B⁺trees. The effectiveness of the B ⁺tree also depends on the data distribution characteristics; in particular, poor performance results when the data show strong key value distribution unbalancing. The aim of this paper is to present the partial index: a new access structure that is useful in such cases of unbalancing, as an alternative to the B⁺tree unclustered indexes. The access structures are built in the physical design phase, and at execution (or compilation) time, the optimizer chooses the most efficient access path. Thus, integration of the partial indexing technique in the design and in the optimization process are also described