Microstructure and Mechanical Properties of Heat-treated GeSb_2Te_4 Thin Films

The effect of annealing on microstructure,adhesive and frictional properties of GeSb 2 Te 4 films were experimentally studied.The GeSb 2 Te 4 films were prepared by radio frequency(RF)magnetron sputtering,and annealed at 200℃and 340℃under vacuum circumstance,respectively.The adhesion and friction experiments were mainly conducted with a lateral force microscope(LFM)for the GeSb 2 Te 4 thin films before and after annealing.Their morphology and phase structure were analyzed by using atomic force microscopy(AFM)and X-ray Diffraction(XRD)techniques,and the nanoindention was employed to evaluate their hardness values.Moreover,an electric force microscope(EFM)was used to measure the surface potential. It is found that the deposited GeSb 2 Te 4 thin film undergoes an amorphous-to-fcc and fcc-to-hex structure transition;the adhesion has a weaker dependence on the surface roughness,but a certain correlation with the surface potential of GeSb 2 Te 4 thin films.And the friction behavior of GeSb 2 Te 4 thin films follows their adhesion behavior under a lower applied load.However,such a relation is replaced by the mechanical behavior when the load is relatively higher.Moreover,the GeSb 2 Te 4 thin film annealed at 340℃presents a lubricative property.     

Investigation of texture effect on visual colour difference evaluation

The texture effect on visual colour difference evaluation was investigated in this study. Five colour centers were selected and textured colour pairs were generated using scanned textile woven fabrics and colour‐mapping technique. The textured and solid colour pairs were then displayed on a characterized cathode ray tube (CRT) monitor for colour difference evaluation. The colour difference values for the pairs with texture patterns are equal to 5.0 CIELAB units in lightness direction. The texture level was represented by the half‐width of histogram, which is called texture strength in this study. High correlation was found between texture strength and visual colour difference for textured colour pairs, which indicates that an increasing of 10 units of texture strength in luminance would cause a decreasing of 0.25 units visual difference for the five colour centers. The ratio of visual difference between textured and solid colour pairs also indicates a high parametric effect of texture. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 341–347, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.     

硅丙乳液及其建筑涂料的制备和性能研究

先将乙烯基有机硅单体及环状有机硅单体在碱催化下,合成有机硅预聚体,再与丙烯酸酯进行共聚制得硅丙乳液及其建筑涂料。研究了有机硅加入形式、有机硅中间体分子量、有机硅加入量等因素对硅丙乳液及其涂料性能的影响,并与相应的纯丙体系进行比较。结果表明,采用分子量较小的有机硅中间体,有机硅用量为10%左右时所制得的乳液及涂料性能优异,对丙烯酸酯的改性效果明显。     

柳钢100t转炉冶炼工艺优化实践

通过分析100t转炉冶炼工艺中存在的问题，对冶炼工艺进行优化，提高转炉过程控制能力和一倒炉命中率，结果表明：过程喷溅可降低至9％，冶炼终点命中率提高到63％ 以上。[第一段]     

雷达目标特征提取的一种方法

将小波变换和马氏距离相结合，提出了一种基于ISAR成像的雷达目标特征提取方法。对ISAR成像数据进行正交二进Symlet小波分解和门限处理，对数据进行压缩，然后计算压缩后坐标点的马氏（Mahalanobis)距离，得到目标稳定的特征向量。由实验结果看出，此向量具有在一定范围内的不变性，能够用于雷达目标识别。     

汽车空调冷凝器腐蚀试验的表征与评价

介绍了汽车空调冷凝器的腐蚀试验程度及方法，对试验后的冷凝器进行了密封性检查，并用光学显微镜和扫描电镜检测和分析了材料的显微结构，焊接质量，腐蚀性质及其腐蚀深度等。通过对冷凝器的宏微观检查与表征，评价了冷凝器质量的优劣，提出了改进措施与建议。     

束流测量中的工频陷波器

提出了一种应用于电子束曝光机束流测量中的自动跟踪工频陷波器，给出电路结构，基于对其工作原理的分析，介绍了提高陷波器跟踪精度的设计要点及调试方法。     

进口VPSA制氧装置的流程特点及配置

详细介绍了进口的VPSA制氧装置的流程特点、工艺参数及主要设备的配置。实际运转证明 ,该制氧装置具有运行可靠、启动时间短、部分负荷性能优越、负荷转换速度快等优点 ,能满足金隆铜业有限公司的实际生产要求。     

新型纺织纤维及其染整特性

文章概述了新型纤维纺织品的特点，介绍了目前市场上流行的几种新型纤维（大豆蛋白纤维、竹纤维、PBT和PTT）的基本性能及其染整特性，并指出了它们各自存在的问题。