WCDMA关键技术的研究

本主要讨论WCDMA的关键无线技术，并简要介绍了WCDMA移动通信系统中的智能技术。     

40000m~3/h空分设备主换热器的设计及制造

通过对进口 4 0 0 0 0m3 /h空分设备主换热器进行结构分析及对比模拟计算 ,用国产传热翅片进行设计、采用真空钎焊工艺制造的主换热器 ,经并网运行 ,设计指标优于原空分设备 ,为今后成套大型空分设备板翅式换热器国产化设计、制造创造了条件。     

秦岭造山带（陕西部分）中新生代陆内造山及与矿产关系

印支运动后的秦岭造山带受古亚洲构造域、环太平洋构造域和特题斯三大构造域联合作用，发生了强烈的陆内造山，奠定了该区条块相间构造岩片系统的基本构造格架，控制了本区斑岩型钼矿和众多热液型多金属矿产的最终成矿作用和矿带展布。     

NiTi形状记忆合金激光气体氮化层表面特征

为改善NiTi合金的表面性能，利用2kW连续波Nd：YAG对NiTi合金进行激光气体氮化处理。采用SEM、TEM、XRD、XPS和纳米压痕研究了氮化层的显微组织及表面特征．结果表明：激光气体氮化可以在NiTi合金表面制备连续、无裂纹、厚度为2μm的TiN表面层，该表面层中基本不合有Ni元素且具有很高的硬度，其纳米压痕硬度为29．28GPa．     

Electrospinning of hydroxyapatite fibrous mats

Polyvinyl alcohol (PVA) with an average molecular weight between 40,500 and 155,000 g/mol was electrospun with a calcium phosphate based sol. The sol was prepared by reacting triethyl phosphite and calcium nitrate and was directly added to an aqueous solution of PVA. This mixture was electrospun at a voltage of 20 kV. The results indicate that the sol was distributed uniformly in the PVA fibers, whose diameter was on the order of 2 μm. This electrospun structure was calcined at 600 °C for 6 h to obtain a residual inorganic, fibrous network, with fiber diameters between 200 and 800 nm. The fibrous structure consists predominantly of hydroxyapatite with an average crystal size of almost 10 to 30 nm. A variety of structures including non-woven mats of solid or micro-porous hydroxyapatite fibers and highly porous scaffolds could be obtained by varying the polymer molecular weight and the sol volume fraction. These structures can have many potential uses in the repair and treatment of bone defects, drug delivery and tissue engineering.     

New Computational Models for Electrostatics of Macromolecules in Solvents

Electrostatic fields of macromolecules (e.g., protein molecules) in solvents are often described by the Poisson-Boltzmann equation. This paper introduces two substantial amendments to the electrostatic model: first, the effective dielectric permittivity of the aqueous solvent layer on the molecular surface is drastically different from its bulk value of ~80 and, second, the recently developed flexible local approximation methods produce different schemes with much higher accuracy than the classical ones     

中原边际小断块油田油气集输工艺配套技术探索

介绍了中原边际小断块油田开发建设以来几种油气集输工艺配套技术的成功应用，并从节能降耗、工艺合理匹配、提高系统效率等方面阐述了其他适于边际小断块油田油气集输工艺的配套技术。     

自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

Thought on the RFID Technology Development in China

In China,RFID technology has been applied to some extents,and also has a huge market and development margin. During this progress,the government will help to build up the basic information construction,then to make the basic informa- tion resource open,at the same time to avoid the policy management over-commercialized,and push RFID technology applica- tion forward and speed up its development.