Mode coupling and equilibrium mode distribution conditions in plastic optical fibers

The equilibrium mode distribution (EMD) condition is critical for optical fiber measurements. In this letter, we examine the achievement of EMD condition inside plastic optical fibers (POF's) under different launch conditions. Our pulse broadening measurements of step-index (SI) POF's as a function of fiber length show that the EMD condition can readily be achieved in an SI POF much shorter than in glass optical fibers. The observation of the EMD condition was also independently verified using the far-field pattern technique.     

Injection mold flashing of liquid crystalline polymers

Thermotropic polyesters, such as Vectra (Hoechst Celanese), have excellent moldability for intricate parts that require high precision of form, such as electronic connectors. Two apparently contradictory aspects of molding behavior contribute to the moldability. On the one hand, the low viscosity of the liquid crystalline polymer (LCP) at high shear rates favors ease of filling molds that contain long, thin paths. On the other, parts molded from LCP have little or no flash to interfere with the functioning of the parts. There has apparently been little work on the rheological aspects of flash formation. An approximate analysis is made by considering that the flash is the result of melt being extruded from the mold cavity into a slit at the mold parting line. The driving force for the extrusion is the injection pressure. The flow is assumed to be isothermal until solidification occurs, at a time that depends on the thickness of the slit, on the thermal diffusivity of the melt, the melt and mold temperatures, and on the solidification temperature of the material. The viscosity is assumed to have power-law dependence on shear rate. It is found that when the aspect ratio (length to thickness) of the flash is small, its length is strongly dependent on the magnitude of the pressure drop at the contraction from the cavity to the slit. At the minimum pressure required to fill a mold, the flash length is predicted to be independent of the rheological and thermal properties of the melt, except for the power-law exponent. Differences in end correction can, however, account for different tendencies to flash at equal moldability. Comparison of the model with Richardson's analysis of freezing in a cavity suggests a correlation of the thermal properties of the melt with his parameter c, which is related to mold filling ability. Tests of the model and possible refinements are suggested.     

Ampacities of power cables wound on reels

This paper presents a mathematical model that is capable of calculating the ampacity of a wide variety of power cable designs consisting of an arbitrary number of layers on a cable reel. The model considers round cables with copper conductors. The validity and accuracy of the ampacity model were verified by comparing the predicted temperature distribution within the reel with measured temperatures collected during an extensive testing program conducted at the US Bureau of Mines (USBM). The mathematical model predicted a temperature distribution within the cable layers that was very close to the measured variation in temperature. The value of the program is illustrated by calculating ampacities for several copper conductor sizes     

Buck converter small-signal models and dynamics: comparison ofquasi-resonant and pulsewidth modulated switches

The generalized canonical model obtained from extended state-space averaging is used as a design tool for the evaluation of the buck converter dynamics in different switching schemes. Designs are given at a specified constant conversion ratio and load for the pulse width modulated, zero current, zero voltage, and nonlinear resonant switch full- and half-wave converters. The small signal equivalent circuit model is discussed, and the feedback effects introduced by resonant switching on line and control transfer functions are evaluated. The small signal transfer functions of half-wave converters are heavily load-current dependent, and exhibit significant damping at light loads, which can result in two real poles in the converter response instead of a complex conjugate pair. This damping effect is evaluated over the entire normalized load current range for the linear and nonlinear zero-current switching converters. Simple approximate expressions are given for the real poles. Experimental verification of the half-wave analysis is presented, and the effects of converter efficiency on model accuracy are discussed     

The evolution of the WPI Advance Space Design Program-an evolvingprogram of technical and social analysis using the NASA Space Shuttlefor engineering education

In December of 1982, Worcester Polytechnic Institute, with the cooperation and support of the Mitre Corporation, initiated a primarily undergraduate educational program to develop experiments to be flown onboard a NASA Space Shuttle. Christened the MITRE WPI Space Shuttle Program, it sponsored the development of five educationally meritorious experiments over a period of four years. Although the experiments were ready to fly in early 1986, the Challenger disaster delayed their flight until the Spring of 1991. The delay notwithstanding, the benefits of the first program were sufficient to justify the development of a second set of experiments. More comprehensive in scope, this new venture, named the Advanced Space Design Program, addresses both technical and social areas of interested related to space flight. The authors present a general historical overview and self-assessment of WPI's space design programs     

Thermochemical investigation of binary liquid mixtures in glass-forming oxide systems

Methods and equipment successfully employed in high- temperature calorimetry to measure partial and integral enthalpies of mixing in liquid oxide systems are reviewed with special attention given to the drop-mixing method. This technique has been used to measure enthalpies of mixing in binary liq-uid mixtures composed of network forming oxides (e.g. SiO₂) and network modifying oxides (e.g. Na₂O). Results for the systems Na₂O-SiO₂ and Na₂O- B₂O₃ are presented graphically. Entropies of mixing were estimated by combining enthalpies with available data on Gibbs energies of mixing. Prominent thermochemical features of glass-forming oxide melts are pointed out. The observed thermodynamic behavior is discussed in relation to its structural basis.     

Recovery of residual oil using the alkali/surfactant/polymer process: effect of alkali concentration

An experimental study was conducted to examine the effectiveness of sodium carbonate in alkali, surfactant and polymer combined slugs in recovering waterflood residual oil. The effects of sodium carbonate concentration on the slug viscosity, interfacial tension, and phase behavior were first examined. Core flood experiments were conducted with unfired linear Berea sandstone cores. The incremental oil recovery, oil cut, residual resistance factor, and chemical propagation were measured for each flood.A significant oil bank was formed for all combined slugs having sodium carbonate concentration ≥1 wt%. The incremental oil recovery, oil cut and the injectivity of the combined slugs greatly improved as sodium carbonate concentration was increased. The effect of sodium carbonate concentration on chemical propagation was dramatic for the synthetic surfactant; a slight delay in surfactant breakthrough and a much slower rate of surfactant propagation were observed at high sodium carbonate concentrations.The results obtained in the present study indicate that the residual oil was recovered by two mechanisms: low interfacial tension and wettability reversal. The former mechanism is dominant at sodium carbonate concentrations ≤1 wt%, whereas the latter plays an important role only at high sodium carbonate concentrations.     

Assessment of melt cleanliness in A356.2 aluminium casting alloy using the porous disc filtration apparatus technique: Part II Inclusion analysis

The data obtained on inclusion types and concentrations has been analysed in the present part in terms of their effect on filtration time and fluidity (measured by the length of solidified metal in quartz tubes). The dross, i.e., the oxide layer that formed on the surface of the molten metal, was carefully collected and its mass determined; then it was examined in a scanning electron microscope equipped with an energy-dispersive X-ray system. The results show that inclusions are not the only parameter to be considered. More importantly, it is Al2O3 (films or particles), which seems to be the deciding factor. It is found, however, that it is quite difficult to separate the individual role of each parameter using the porous disc filtration apparatus (PoDFA) technique, i.e., sampling, without disturbing the molten metal. Sampling would introduce undesirable oxides into the PoDFA crucible, resulting in an artificial increase in the filtration time. Increasing the holding periods of the molten metal increases the quantity of dross. In all cases, the skimmed dross is wet, i.e., it contains an appreciable amount of molten metal. The main types of oxides in the dross are MgO, MgAl2O4, Al4C3 and Al2O3. This revised version was published online in November 2006 with corrections to the Cover Date.     

向家坝水电站施工组织设计简介

向家坝水电站为装机６０００ＭＷ的巨型电站，其施工组织设计，结合工程总体布置，选用两期导流，一期先围左岸，二期围右岸的施工程序。一期由右侧的主河床泄流、通航及漂木，二期由导流底孔和缺口泄流，临时船闸通航，散漂木材在坝址上游收漂后陆路转运。大坝混凝土采用塔带机配缆机浇筑。电站第一批机组发电工期为７年，总工期为９年６个月。     

The GS algorithm for exact linearization to Brunovsky normal form

An algorithm utilizing the minimal number of integrations for the exact linearization of nonlinear systems to Brunovsky normal form under nonlinear feedback is presented. The tools which are involved are based on classical constructions appearing in the theory of exterior differential systems