低温共烧陶瓷技术及其应用

低温共烧陶瓷(low temperature co-fired ceramic,LTCC)技术是实现电子元件小型化、片式化的一种理想的封装技术,已成为电子元件集成的主要工艺方式,引起了人们的广泛关注。本文详细叙述了LTCC技术的特点、LTCC材料体系、国内外发展现状以及LTCC技术在电子元件集成中的应用。认为利用LTCC技术来实现电源、有源和无源器件的一体化将是今后信息功能陶瓷发展的一个重要方向。我国应该抓住LTCC技术所面临的前所未有的发展机遇,大力开发具有自主知识产权的LTCC技术,整体提升我国在电子集成领域的技术水平和国际竞争力。     

涂料用稀土催干剂中稀土金属含量分析研究

在一定条件下，以ＥＤＴＡ为络合剂，以二甲酚橙为指示剂，用络合滴定法测定了涂料用稀土催干剂中稀土金属的含量。     

电冶矾土刚玉质自流浇注料的研究

以电冶矾土刚玉为骨料有利于提高浇注料的自流性能 ;六偏磷酸钠分散剂对Al2 O3泥浆流变性能有较理想的改善作用 ;电冶矾土刚玉质自流浇注料具有优良的抗渣性能 ,这主要同浇注料的显微结构和电冶矾土刚玉骨料的性能相关。     

Preparation of nanosize Pt clusters using ion exchange of Pt(NH3) 4 2+ inside mesoporous channel of MCM-41

Mesoporous molecular sieve MCM-41 with a Si/Al ratio of 35 was obtained by hydrothermal synthesis using a gel mixture with a molar composition of 6 SiO₂0.1 Al₂O₃1 hexadecyltrimethylammonium chloride 0.25 dodecyltrimethylammonium bromide 0.25 tetrapropylammonium bromide0.15 (NH₄)₂O1.5 Na₂O300 H₂O. The MCM-41 sample was calcined in O₂ flow at 813 K and subsequently ion exchanged with Ca²⁺. A small Pt cluster has been supported on the MCM-41 sample following a procedure using ion exchange of Pt(NH₃) ₄ ²⁺ . The Pt(NH₃) ₄ ²⁺ ion supported on MCM-41 has been activated in O₂ flow at 593 K and subsequently reduced with Fh flow at 573 K, in the same way used for the preparation of a Pt cluster entrapped inside the supercage of zeolite NaY. The resulting Pt cluster supported on the MCM-41 shows hydrogen chemisorption oftotal two H atoms per Pt at 296 K (based on the total amount of Pt) and high catalytic activity for hydrogenolysis of ethane. The chemical shift in¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the Pt cluster is located inside the mesoporous molecular sieve.     

格灵化工基于SmartPro的DCS系统设计与应用

介绍北京和利时公司开发的SmartPro MACS Ⅲ型DCS系统在格灵化工硫酸装置中的应用.DCS系统包括硬件组成、软件设计及控制功能实现.该控制系统稳定可靠、控制精度高.在提高生产装置自动化水平的同时,使硫酸产品质量提高,生产成本大幅度降低.     

3000m~3/h排烟循环流化床脱硫工艺中试实验研究

介绍了采用真实烟气的 30 0 0m3 /h排烟循环流化床烟气脱硫工艺 (CFB FGD)及其中间试验装置 ,通过实验研究了钙硫摩尔比 (Ca/S)、近绝热饱和温度差 (ΔT)、烟气湿度、喷水量、入口SO2 浓度、浆液雾化质量、脱硫灰循环等对脱硫效果的影响。实验表明 ,CFB FGD工艺在停留时间小于 6s、烟气流速v =4— 6m/s、Ca/S =1.2、ΔT =10— 12℃时可实现高达 90 %的脱硫效率。     

A one-shot bargaining strategy for dealing with multifarious opponents

Bargaining is an effective paradigm to solve the problem of resource allocation. The consideration of factors such as bounded rationality of negotiators, time constraints, incomplete information, and complexity of dynamic environment make the design of optimal strategy for one-shot bargaining much tougher than the situation that all bargainers are assumed to be absolutely rational. Lots of prediction-based strategies have been explored either based on assuming a finite number of models for opponents, or focusing on the prediction of opponent’s reserve price, deadline, or the probabilities of different behaviors. Following the methods of estimating opponent’s private information, this paper gives a strategy which improves the BLGAN strategy to adapt to various possible bargaining situations and deal with multifarious opponents. In addition, this paper compares the improved BLGAN strategy with related work. Experimental results show that the improved BLGAN strategy can outperform related ones when faced with various opponents, especially the agents who frequently change their strategies for anti-learning.     

碱式碳酸锌生产工艺的研究

本文介绍了碳酸化法新工艺，技术先进、效益明显、产品质量可靠，具有推广应用的价值。     

数据驱动的冷却水塔建模与节能优化操作

针对冷却水塔的节能操作给出了一种数据驱动的建模与优化方法。首先,基于冷却水塔实际运行数据,应用非负绞杀变量选择方法给出一个自适应模型用于描述冷却水塔过程,该模型对于冷却水塔出口水温具有良好的预测精度。根据变量选择结果,分析了外界空气温度与湿度对冷却能力的影响。然后,提出了基于模型的冷却水塔风机的优化操作策略,并进行实验将之应用于冷却水塔的操作。研究结果显示,基于模型的优化操作具有较大的节能空间。     

压力条件下淀粉合成甲基葡萄糖苷

以淀粉、甲醇为原料 ,以酸为催化剂 ,在压力条件下合成甲基葡萄糖苷 (简称甲苷 ) ,得出最佳催化剂是浓硫酸。通过正交实验 ,考察了糖醇比、反应压力、催化剂用量及反应时间对合成甲苷的影响 ,得到合成甲苷的最佳条件为n(淀粉 )∶n(甲醇 ) =1∶30 ,压力 0 5MPa ,催化剂用量为淀粉质量的 5 % ,反应时间 12 0min ,收率达 98 9%。