NH4SCN从ROH-CTMAB-C12H26载金有机相中反萃金

研究了硫氰酸铵（NH4SCN）从混合醇（ROH）－十六烷基三甲基溴化铵（CTMAB）－正十二烷（C12H26）载金有机相中反萃金，考察了平衡时间，PH值，反萃剂浓度，温度等因素对反萃率的影响及有机相的循环使用，绘制了反萃等温曲线，结果表明，NH4SCN对金具有较高反萃率，可顺利实现金的反萃。     

DH-1型型砂水分自动测控系统

介绍了一种新型的型砂水分测控系统。它以单片机为主控机，采用自行 研制的电容式集成水分传感器对型砂水分进行测控。该系统应用先进的数据采集和自动控制技术，具有控制精度高、运行可靠、安装操作方便等特点，实际应用试验表明本系统较好地符合生产实际要求。     

超重力对燃烧合成Ti（C，N）-TiB2复合粉体的影响

以Ti和B4C为起始反应物，分别在常规和超重力条件下通过燃烧合成技术制备出Ti（C,N）-TiB2复合粉体，利用XRD和SEM对燃烧产物进行了表征，研究了起始组成和超重力条件对燃烧产物相组成和微观形貌的影响。结果表明，燃烧产物主要由Ti（C，N）和TiB2组成，通过改变起始配方中Ti／B4C的摩尔比，可以调节产物中Ti（C，N）和TiB2的相对含量。超重力条件下，反应物颗粒接触更加充分，碰撞更加频繁，因而晶粒形态发育更加完整，生成规则的多面体。     

The development of a high-speed spindle measurement system using a laser diode and a quadrants sensor

Reducing the manufacturing time is the trend of precision manufacturing, and the precision of a work-piece is very important for manufacturing industry. High-speed cutting is becoming more widely used and the high-speed spindle is a very important element, whose precision may affect the overall performance of high-speed cutting. Most of the studies on high-speed cutting are focused on the cutting force, the vibration of the spindle and the effects of the spindle's thermal expansion; however, the measurement of the high-speed spindle continues to use the conventional spindle measurement method.As with the measurement of the high-speed spindle, more strict demands are set on the dynamic balance of cutting tools and the bandwidth of the measurement systems when compared with common spindles. The capacitance displacement sensor has been employed for the spindle error test. The precision of the measurement system is limited by the reference (such as a master ball or a master cylinder). Also the capacitance sensor and the reference must be grounded together. This paper presents a simple spindle measurement system using a laser diode and a quadrants sensor, with accuracy up to 1 μm, within 300,000 rpm for various spindles. The system does not need any reference and it is easy to set up. This system can be applied to measure the spindle errors, the spindle speed and the spindle indexing.     

稀土钕对激光快速成形TC4合金组织及性能的影响

针对氢化脱氢钛合金粉末氧含量较高的问题，研究了添加稀土钕对激光快速成形TC4合金组织及性能的影响。结果发现，添加稀土Nd后，激光快速成形TC4合金的宏观晶粒尺寸变化不大；但随稀土添加量的增加，初始β列状晶逐渐转化为全β等轴晶，晶粒内部的魏氏α组织逐渐转变为网篮α，粗化α条不断增多，呈现团束聚集趋势，晶界α集束体积分数也不断增大；随稀土添加量的增加，激光快速成形TC4合金的室温塑性先大幅度提高，然后急剧降低；稀土添加量为0．1％～0．2％（质量分数，下同）时，氧含量为0．26％的氢化脱氢TC4合金粉末激光快速成形件沉积态的抗拉强度达975MPa，延伸率9．5％，满足锻件标准要求。     

利用“球化效应”激光扫描制备球形Ti粉的研究

利用“球化效应”，在SLS设备上探索将异形Ti粉转化为高性能球形粉末的可行途径。通过系统地改变激光功率、扫描速度，以及选取合适的激光扫描间距，探明了形成“球化效应”的工艺条件，并在激光功率为600W，扫描速度为30mm／s时，获得了较为理想的球形Ti粉。通过对球化过程进行理论分析，得出了选取激光扫描制备球形Ti粉工艺参数的准则。     

Hydriding-dehydriding properties of Mg2Ni alloy modified by ball-milling in tetrahydrofuran

A new approach of ball-milled Mg2Ni in tetrahydrofuran (THF) to improve the hydriding kinetics of Mg2Ni alloy is suggested and studied. It is found that the modified alloy displayed the improved activity for hydriding even at relatively low temperature (e.g., 323-373 K). In the case of the sample milled in THF for 20 h, the hydrogen content (mass fraction) reaches 1.6 % at 323 K, 2.1% at 348 K and 3.4% at 448 K, respectively. The use of THF during grinding led to the change of the structure, which is reflected by the broadening and weakening of the diffraction peaks in the XRD spectra. The XPS analysis shows that Mg (2s) binding energy peak of Mg2Ni after modification shifted from a lower binding energy to a higher one, indicating the charge transference between Mg and THF and the formation of catalytically active electron donor-acceptor (EDA) complexes on the surface of modified Mg2Ni alloy.     

Microhardness and corrosion behavior in CrN/electroless Ni/mild steel complex coating

The electroless nickel–phosphorous (Ni–P) coating was chosen as an interlayer to improve the properties of the CrN/mild steel (MS) composite. A hypophosphite-reduced acid solution was used to first deposit electroless Ni–P onto MS substrates, and then the CrN overlayer was deposited by reactive r.f. magnetron sputtering onto the electroless Ni–P modified substrate. The electroless Ni–P layer crystallizes with the precipitation of a Ni₃P phase during r.f. sputtering, and thus a coating–substrate composite of CrN/Ni–Ni₃P/MS is formed. The electroless Ni–P coating increases the surface hardness of the steel substrate to more than three times. The surface hardness of the CrN coating modified by an electroless Ni–P interlayer exhibits a hardness higher than 2000 HK_0.015. The usual substrate effect on the microhardness of the coatings is nearly eliminated with the complex coating feature, and a significant enhancement of surface hardness in the coating assembly is achieved. The corrosion tests indicate that the Ni–Ni₃P/MS configuration exhibits a more positive E_corr value (i.e. less electronegative) than CrN/MS and the corresponding potential curve is shifted toward the low-current side, indicating a better anti-corrosion performance. Through comparison of the E_corr values and the polarization curves, it is demonstrated that the CrN/Ni–Ni₃P/MS composite exhibits significantly higher corrosion resistance than the Ni–Ni₃P/MS and CrN/MS coating configurations.     

锌铝超塑性合金超塑压缩试验研究

对Ｚｎ－２２％Ａｌ超塑性合金进行了等温超塑压缩试验。在相同的温度、变形速率条件下，研究了不同的变形强度与流动应力及硬度，以及在相同的温度、变形程度条件下，不同的变形速率与流动应力等的关系。