Measurement method using coupled transmission lines for voltage transients on the distribution line

It is well known that voltage transients are caused by the operation of switchgears in a power system. The voltage transients travel along the power line as a traveling wave, and cause malfunction of electrical devices, communication systems, and the operational error of a control system. The voltage transients at the making operation of switchgear were examined to obtain the fundamental data for considering the immunity of communication systems used on a power system. However, it was difficult to observe the voltage transients using the potential transformer and the capacitance potential device because the transients were very rapid. Therefore, a measurement method using the coupled transmission line system is proposed to measure the high-speed and high-voltage transients, and the actual experimental results on the 6.9-kV power system are presented. This method enables the measurement of high-speed voltage transients in out of contact with the power system.     

Quantitative source identification of dioxin-like PCBs in Yokohama, Japan, by temperature dependence of their atmospheric concentrations

The source and environmental behavior of dioxin-like polychlorinated biphenyls (PCBs) together with other PCBs and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) were evaluated based on analysis of variations in their atmospheric concentrations in Yokohama, Japan. Potential factors responsible for variations in the atmospheric concentrations of the congeners were investigated by principal component analysis and multiple regression analysis of the data. Two major variations were seen: one had strong temperature dependence, while the other had no significant temperature dependence. A possible explanation for this difference is that the former is related to congeners released by volatilization (e.g., volatilization from commercial PCB products and past polluted environments), while the latter is related to congeners emitted from thermal processes. The relative contributions of dioxin-like PCBs released by volatilization and those emitted from thermal processes were estimated based on the temperature dependence of the atmospheric concentrations. The results suggest that both dioxin-like PCBs emitted from thermal processes and those released by volatilization are significant sources of air pollution in this area in terms of the toxic equivalent (TEQ) for dioxin-like PCBs. We demonstrated that the present approach based on variations in atmospheric concentrations can be useful in providing a qualitative as well as quantitative understanding of source information.     

Wind-flow measurement over the Subaru Telescope

Wind flows over the 8.2-m Subaru Telescope at Mauna Kea in Hawaii were analyzed with a correlation method. Three or four wind flows were detected from our measurements. Spatial and temporal resolution of the wind-flow analysis across the 8.2 m pupil were investigated experimentally. A three-dimensional spatiotemporal-frequency analysis was also applied to the wind-flow data.     

Effects of rice cleaning and cooking process on the residues of flutolanil,fenobucarb, silafluofen and buprofezin in rice

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.     

Study on chemical structures of poly (tetrafluoroethylene-co-perfluoroalkylvinylether) by soft-EB irradiation in solid and molten state

Poly (tetrafluoroethylene-co-perfluoroalkylvinylether) (PFA) was irradiated by soft electron beam (soft-EB) under nitrogen gas atmosphere in solid-state and its molten state, respectively. The changes of thermal property and chemical structures of irradiated PFA in solid-state and molten state were studied by differential scanning calorimetric analysis (DSC) and solid-state ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. By DSC analysis, the melting temperature shifted to lower temperatures, and crystallinity decreased with increasing soft-EB dose. By solid-state ¹⁹F MAS NMR spectroscopy, the new signals was observed and the detected new signals in irradiated PFA at 315 °C and at 30 °C were due to the tertiary carbon group with branching site (Y-type crosslinking site), perfluoro-propylene site and chain end methylene groups, respectively.Moreover, the molar ratio of perfluoroalkylvinylether (FAVE) structure to -CF₂- units decreased with increasing dose.     

Synthesis of the Bi-2222 Compounds of Bi–Sr–Ln(Zr)–Cu–O (Ln = Sm,Eu, Gd,and Dy)

Bi-based superconducting compounds with the 2222 structure has been already synthesized in the Bi₂Sr₂- (Ln_1−x Ce _x )₂Cu₂O_10+y (Ln = Sm, Eu, and Gd) systems. One of the characteristics of these compounds is the existence of the fluorite-like (Ln_1−x Ce _x )₂O₂ block between two CuO₅ pyramids in the crystal structure. The tetravalent ions of Ce⁴⁺ are reported to be necessary to stabilize the 2222 structure. Recently, we have discovered that the Bi-2222 phase could be composed in the Bi₂Sr₂(Ln_2−x Zr _x )Cu₂O _z (Ln = Sm, Eu, Gd, and Dy) systems, where Zr⁴⁺ is used as a new tetravalent ion stabilizing the 2222 structure in stead of Ce⁴⁺. In the new system, nearly single 2222 phase samples have been obtained at the nominal composition of x=0.5 (Ln = Sm, Eu, and Gd) and in the range of 0.1≤x≤0.3 (Ln = Dy). Among them, the sample with Ln = Gd has the smallest resistivity at 273 K. But it is a semiconductor, and the conduction process at low temperatures is assumed to be followed by a two-dimensional VRH. The experimental results for the Gd samples with a partial substitution of Pb for Bi in the Bi₂Sr₂(Gd_2−x Zr _x )Cu₂O _z system are also reported.     

Electrochemical Fabrication of Metallic Nanowires and Metal Oxide Nanopores

A nuclear track etched polycarbonate membrane filter with numerous cylindrical nanopores was applied as a nanoporous template for growing metallic nanowires. Nickel, cobalt, and iron nanowires were electrodeposited into the cylindrical nanopores. Cathodic polarization curves were measured to determine an optimum condition for growing nanowires. The shape of nanowires was observed using scanning electron microscope (SEM) and the crystal structure was analyzed using transmission electron microscopy (TEM). Diameter and length of nanowires corresponded to those of nanopores and each nanowire was composed of a single crystal. Anodized aluminum oxide films were also fabricated as a novel nanoporous template. The pore length and diameter was controlled changing anodizing conditions. Ordering behavior of nanopores array in an anodized aluminum oxide film was also investigated to make a novel nanoporous template with a highly ordered honeycomb array of nanopores.     

Crosstalk Countermeasures for High-Density Inductive-Coupling Channel Array

Inductive coupling among stacked chips in a package enables 1 Gb/s/channel data communications. Array arrangement of the channel increases data bandwidth, while signal may be degraded by crosstalk. In this paper, crosstalk is measured and analyzed, and crosstalk countermeasures are discussed. Received signal waveforms through the inductive coupling are measured by embedded voltage detectors on a test chip. Interference-to-signal ratio (ISR) has good agreement between the measurements and calculations. It is found that crosstalk is reduced negligibly at a certain distance. If the channels are arranged at intervals of this distance, ISR is minimized. A technique based on time interleaving is also proposed to further reduce crosstalk. A 3times17 channel array is implemented with the crosstalk countermeasures. The channel pitch is taken down to 50 mum. Inter-chip communication with data rate of 1 Gb/s/channel and bit error rate (BER) lower than 10^-9 is demonstrated