Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

Nucleotide sequencing analysis of the 146-kilobase segment around the IkBL and MICA genes at the centromeric end of the HLA class I region

The biomechanics of medialization laryngoplasty are not well understood. An excised canine larynx model was used to test the effects of various sized silicon implants. The vocal fold length, position, and tension were measured. Medialization laryngoplasty did not affect vocal fold length. At the mid-membranous vocal fold, larger shims resulted in greater medialization and tension. Medialization laryngoplasty neither medialized nor stiffened the vocal process to resist lateralizing forces. We conclude that medialization laryngoplasty provides bulk and support for defects of the membranous region of the vocal fold, but does not appear to close a posterior glottal gap. The selection of a surgical procedure to treat glottal incompetence should take into account the unique biomechanical properties of the anterior (membranous vocal folds) and posterior (cartilaginous portion) glottis.     

Clinical significance of natural killing activity in patients with advanced lymphoma

OBJECTIVE: (1) To determine which facial landmarks show the greatest movement during specific facial animations and (2) to determine the sensitivity of our instrument in using these landmarks to detect putatively abnormal facial movements. DESIGN: Movements of an array of skin-based landmarks on five healthy human subjects (2 men and 3 women; mean age, 27.6 years; range, 26 to 29 years) were observed during the execution of specific facial animations. To investigate the instrument sensitivity, we analyzed facial movements during maximal smile animations in six patients with different types of functional problems. In parallel, a panel was asked to view video recordings of the patients and to rate the degree of motor impairment. Comparisons were made between the panel scores and those of the measurement instrument. RESULTS: Specific regions of the face display movement that is representative of specific animations. During the smile animation, landmarks on the mid- and lower facial regions demonstrated the greatest movement. A similar pattern of movement was seen during the cheek puff animation, except that the infraorbital and chin regions demonstrated minimal movement. For the grimace and eye closure animations, the upper, mid-facial, and upper-lip regions exhibited the greatest movement. During eye opening, the upper and mid-facial regions, excluding the upper lip and cheek, moved the most, and during lip purse, markers on the mid- and lower face demonstrated the most movement. We used the smile-sensitive landmarks to evaluate individuals with functional impairment and found good agreement between instrument rankings based on the data from these landmarks and the panel rankings. CONCLUSION: The present method of three-dimensional tracking has the potential to detect and characterize a range of clinically significant functional deficits.     

Osteoclastogenesis inhibitory factor exhibits hypocalcemic effects in normal mice and in hypercalcemic nude mice carrying tumors associated with humoral hypercalcemia of malignancy

In the present study, we attempted to determine the extent to which an anterior capsulorrhexis carried out during cataract surgery contracts postoperatively. The size of the continuous curvilinear capsulorrhexis (CCC) was measured at the end of surgery and at the final follow-up examination in 52 eyes of 40 patients who underwent phacoemulsification/aspiration and implantation of an intraocular lens (IOL) with 6-mm optics. Images obtained by video during surgery and by slit-lamp microscopy were used to determine the CCC size with reference to the optics of the IOL. The average CCC size was 5.0 mm at the end of surgery; it contracted to 4.4 mm by the final postoperative examination. The contraction of the anterior capsule progressed rapidly in the first 50 days following surgery and then gradually thereafter. The extent of contraction was greater in older patients. The smaller the CCC size immediately after surgery, the more rapidly it contracted. The size of the capsulorrhexis contracted an average of 22% following cataract surgery. The contraction rate tended to be higher in older patients. The results suggest that the capsulorrhexis carried out in cataract surgery for elderly patients should be sufficiently large, but not larger than the optics size of the IOL.     

Experimental Facsimile Communication System on Packet Switched Data Network

The use of the public data network for facsimile communication has remarkable advantages with regard to high speed and reliable transmission and, in addition, it is well applicable to provide value added facilities for future service extension. The Research and Development Laboratories of Kokusai Denshin Denwa (KDD) Company, Ltd. have developed an experimental facsimile communication system on the packet switched data network (PSDN). The system is composed of packet switching exchanges (PSE), high speed digital facsimile terminal equipment, a facsimile communication processor (FCP), and facsimile packet assembly/ disassembly equipment (FAX-PAD). The facsimile equipment in the system adopts a two-dimensional modified READ code and has the interface protocol to the PSDN. The FCP provides the store-and-forward facilities to provide such services as delayed delivery, multiaddress delivery, and mailbox service. The FAX-PAD realizes the interworking between facsimile equipments on the public switched telephone network (PSTN) and those on PSDN. After various experiments including international field tests, it was confirmed that the system is useful for future advanced facsimile service.     

Radiation doses to neonates during X ray computed tomography examinations

As the survival rate of newborns has increased, the number of X ray computed tomography (CT) examinations performed on neonates has been increasing. The exposure doses from CT examinations are known to be higher than those from conventional radiography. Although radiation sensitivity of neonates is higher than that of adults, there are few reports on dose estimates of neonates in CT examinations. Four cylindrical phantoms and one neonatal phantom have been developed to estimate doses to neonates during CT examinations. Using these phantoms and glass dosemeters, absorbed doses were measured. Estimated exposure doses to neonates were higher than those to adults, and our results suggest a need to optimise carefully CT examinations in newborns.     

Ultrasonic techniques for imaging and measurements in molten aluminum

In order to achieve net shape forming, processing of aluminum (Al) in the molten state is often necessary. However, few sensors and techniques have been reported in the literature due to difficulties associated with molten Al, such as high temperature, corrosiveness, and opaqueness. In this paper, development of ultrasonic techniques for imaging and measurements in molten Al using buffer rods operated at 10 MHz is presented. The probing end of the buffer rod, having a flat surface or an ultrasonic lens, was immersed into molten Al while the other end with an ultrasonic transducer was air-cooled to room temperature. An ultrasonic image of a character "N", engraved on a stainless steel plate immersed in molten Al, and its corrosion have been observed at 780 degrees C using the focused probe in ultrasonic pulse-echo mode. Because cleanliness of molten Al is crucial for part manufacturing and recycling in Al processing, inclusion detection experiments also were carried out using the nonfocused probe in pitch-catch and pulse-echo modes. Backscattered ultrasonic signals from manually added silicon carbide particles, with an average diameter of 50 microm, in molten Al have been successfully observed at 780 degrees C. For optimal image quality, the spatial resolution of the focused probe was crucial, and the high signal-to-noise ratio of the nonfocused probe was the prime factor responsible for the inclusion detection sensitivity using backscattered ultrasonic signals. In addition, it was found that ultrasound could provide an alternative method for evaluating the degree of wetting between a solid material and a molten metal. Our experimental results showed that there was no ultrasonic coupling at the interface between an alumina rod and molten Al up to 1000 degrees C; therefore, no wetting existed at this interface. Also because ultrasonic velocity in alumina is temperature dependent, this rod proved to be able to be used as an in-line temperature monitoring sensor under 1000 degrees C in molten Al.     

Budding of fowlpox and pigeonpox viruses at the surface of infected cells

Chick embryo fibroblasts and chorioallantoic membranes infected with fowlpox virus (FWPV) or pigeonpox virus (PPV) were examined by transmission and scanning electron microscopy. Immature virus particles were observed in finely granular areas, i.e. virus factories, of the cytoplasm. These particles had various forms depending on their stages of development. Many tubular structures were also seen in these regions. Mature virus particles with ellipsoidal or brick-shaped forms enclosing electron-dense cores were detected throughout the cytoplasm. Notably, there was a high frequency of virus budding at the cell surface, but only occasional virus wrapping in the cytoplasm. Another remarkable feature of the infected cells was accumulation of many virions just beneath the plasma membrane, indicating that this phenomenon is closely related to virus budding. Based on the observed frequency of budding, this mechanism seems to be the predominant way for FWPV and PPV to exit the cell.     

Terahertz radiation from a shallow incidence-angle InAs emitter in a magnetic field irradiated with femtosecond laser pulses

The optimized incidence angle and magnetic field direction geometry of an InAs terahertz radiation emitter irradiated with femtosecond laser pulses in a magnetic field is reported. The optimum geometric layout is the magnetic field direction parallel to the semiconductor surface and at an incidence angle that is slightly larger than the Brewster angle. Additionally, we also observed a center frequency shift of terahertz radiation spectrum by changing the incidence angle of the excitation laser.     

Vibrational properties of wood along the grain

The dynamic Young's modulus (E_L) and loss tangent (tan _L ) along the grain, dynamic shear modulus (G_L) and loss tangent (tan _S) in the vertical section, and density () of a hundred spruce wood specimens used for the soundboards of musical instruments were determined. The relative acoustic conversion efficiency ( ) and a ratio reflecting the anisotropy of wood (, (E_L/G_L)(tan _S/tan _L)) were defined in order to evaluate the acoustic quality of wood along the grain. There was a positive correlation between and , and the variation in was larger than that in . It seemed logical to evaluate the acoustic quality of spruce wood by a measure of . By using a cell wall model, those acoustic factors were expressed with the physical properties of the cell wall constituents. This model predicted that the essential requirement for an excellent soundboard is smaller fibril angle of the cell wall, which yields higher and higher . On the other hand, the effects of chemical treatments on the and of wood were clarified experimentally and analyzed theoretically. It was suggested that the and of wood cannot be improved at the same time by chemical treatment.