Radiological hazard of long-lived spallation products in accelerator-driven system

The present paper focuses on analysis of radiological hazard of spallation products that appears to be an important factor that might affect the choice of beam/target performance in designing the accelerator-driven systems. The analysis is done in terms of toxicity expressed in units of Annual Limit on Intake (ALI). It reveals the significant contribution of alpha emitting rare earths (¹⁴⁶Sm, ¹⁴⁸Gd, ¹⁵⁰Gd, ¹⁵⁴Dy) into overall toxicity of spallation targets.     

Transmission distance of in-line amplifier systems withgroup-velocity-dispersion compensation

Group-velocity dispersion (GVD) compensation in in-line amplifier systems is evaluated from the viewpoint of improving the transmission distance. The nonlinear Schrodinger equation, which simulates signal propagation in optical fibers, is numerically evaluated to clarify the optimum configuration for GVD compensation. It is shown that the optimum amount of GVD compensation is about 100% of the GVD experienced by the transmitted signal. The optimum compensation interval is found to be a function of the bit rate, signal power, and dispersion parameter. For dispersion parameter values ranging from about -0.1 ps/nm/km to -10 ps/nm/km, and an amplifier noise figure of about 6 dB, the optimum compensation configuration can eliminate the GVD from in-line amplifier systems, thus improving transmission distances to those limited by self-phase modulation and higher-order GVD     

Prolonged exposure to intravesical foreign body induces a giant calculus with attendant renal dysfunction

A 31-year-old man came to our hospital complaining of severe voiding pain. He had inserted a fishing line made of nylon into his urethra at the age of eighteen, which was unable to be taken out and had been left there for 13 years. Preoperative ultrasonogram showed severe bilateral hydronephrosis and the serum BUN and creatinine level were as high as 45.2 mg/dl and 4.8 mg/dl, respectively. A huge bladder stone was demonstrated in X-ray film, the patient was admitted and vesicolithotomy was performed. The size of the stone was 10.5 x 7.5 x 7.5 cm and the weight was 360 grams. The fishing line was found inside the stone and the length was over 3 meters. The serum BUN and creatinine level after the operation were still high as 28.4 mg/dl and 4.1 mg/dl, respectively, and they did not improve even after six months following.     

Relative zinc-binding capacity of metallothionein: studies in renal cytosols from zinc-injected rats

Each rat was injected intraperitoneally once with 0.9% NaCl or zinc (10, 20, 40, or 60 mg zinc/kg b.w.). The zinc content in kidney reached a maximum level of approx. 50 microgram/g kidney, corresponding to a dose (40 mg zinc/kg b.w.). The distribution profiles of the renal cytosols of zinc-injected rats on a Sephadex G-75 column showed that most of the increased zinc was attributable to metallothionein. There was a linear relationship between the zinc contents in cytosol and metallothionein. Our results demonstrated that there was a limit of zinc accumulation in kidneys of zinc-injected rats and that 57% of the increased zinc in renal cytosols was bound to metallothionein. Our results suggest that the role of metallothionein in zinc accumulation in the kidney is similar to that of zinc accumulation in liver.     

Fibre transmission distance determined by eye opening degradation due to selfphase modulation and group-velocity dispersion

Numerical analysis of IM signal propagation in an optical fibre is carried out taking selfphase modulation and group-velocity dispersion into account. The transmission distance yielding a prescribed eye opening penalty, in the normal dispersion region, is shown to be inversely proportional to the square root of the signal power.<>     

An over 2200-km coherent transmission experiment at 2.5 Gb/s usingerbium-doped-fiber in-line amplifiers

A 2223 km transmission distance was achieved with a 2.5-Gb/s heterodyne detection system that used erbium-doped-fiber in-line amplifiers and dispersion-shifted single-mode fibers. Twenty-five amplifiers, placed at approximately 80-km intervals, offered a total gain of more than 440 dB. Receiver sensitivity was -42.0 dBm, with only a 4.2-dB penalty from the initial sensitivity achieved by the back-to-back configuration     

High-reliability GaAs-AlGaAs HBTs by MBE with Be base doping andInGaAs emitter contacts

The authors have developed a modified MBE growth process to produce high-gain n-p-n GaAs-AlGaAs heterojunction bipolar transistors (HBTs) with a mean time to failure (MTTF) of 1.5×10⁸ h at 125°C. Beryllium incorporation and diffusion are controlled through a combination of reduced substrate temperature and increased As/Ga flux ratio during MBE growth, resulting in extremely stable HBT profiles. The authors also demonstrate graded InGaAs surface layers with nonalloyed refractory metal contacts that significantly improve ohmic reliability compared to alloyed AuGe contacts. The ability to produce robust HBTs by MBE is critically important to this technology     

Metallized ultra-shallow-junction device technology for sub-0.1μm gate MOSFET's

This paper describes a new ultra-thin SOI-CMOS structure offering reduced parasitic diffusion-layer resistance. It addresses ways to deal with the ultra-shallow junctions required by sub-0.1 μm MOSFET's. Based on a CVD tungsten process we experimentally investigate the characteristics of selectively grown tungsten used in the source and drain region made in SOI layers of various thicknesses ranging from 10 to 100 nm. We also investigate certain CMOS device characteristics. The SOI-CMOS structure, with low parasitic diffusion-layer resistance and good contact characteristics for ultra-shallow junction devices exhibits superior device performance and high scalability     

Metabolism of tetramethrin isomers in rat: IV. Tissues responsible for formation of reduced and hydrated metabolites

1. To identify the sites of formation of the reduced metabolites, 3-hydroxy-cyclohexane-1,2-dicarboximide (3-OH-HPI-1 and -2), 1,2-cyclohexanedicarboxylic acid (TCDA) and 1-hydroxy-1,2-cyclohexanedicarboxylic acid (1-OH-HPA), in rat treated with 14C-labelled (1RS, trans)-tetramethrin, [3,4,5,6-tetrahydrophthalimidomethyl (1RS, trans)-chrysanthemate], bile-duct cannulated animals were orally or intravenously administered 14C-labelled 3,4,5,6-tetrahydrophthalimide (TPI) or 3,4,5,6-tetrahydrophthalic acid (THPA), precursors of these metabolites, and bile, urine and faeces were collected for analysis. 2. 3-OH-HPI-1 and 3-OH-HPI-2, which are cis-form reduced metabolites, and 1-OH-HPA were detected in bile and urine samples of the bile-cannulated rat treated intravenously and orally with 14C-labelled TPI, indicating their formation in tissues or blood. TCDA, a trans-form reduced metabolite, was not detected in bile, urine or faeces of the bile-cannulated rat treated intravenously with 14C-THPA, but was found in the faeces after oral application, indicating formation in the gastrointestinal tract. 3. To clarify whether 1-OH-HPA is produced from THPA via TCDA (hydroxylation via reduction) or by direct addition of H2O to its double bond (hydration), rats were orally administered 14C-labelled TCDA, and metabolites in urine and faeces were analysed. The observed lack of 1-OH-HPA indicated formation by direct addition of H2O to the double-bond of THPA. 4. To specify which tissues form reduced and hydrated metabolites, in vitro metabolism studies were carried out. Reduction to the cis-form was found to take place in blood cells, reduction to the trans-form took place in the gastrointestinal tract contents, and hydration took place in the liver and the intestinal tract contents.     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003