A new method of automatic polishing on curved aluminium alloy surfaces at constant pressure

This paper presents original research results of automatic polishing on curved surfaces of aluminium alloy moulds at constant pressure. The automatic polishing of aluminium alloy material is achieved. A parameter S is defined, which can express the comprehensive influential factors in the automatic polishing process and give a relationship among the polishing quality and the various machining variables. Based on this, a new method for comprehensive control of polishing quality is suggested.     

Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.     

Functional monomers and polymers, 64. Synthesis of poly-β-alanine from β-alanine, β-alanyl-β-alanine,and β-alanyl-β-alanyl-β-alanine 4-dodecanoyl-2-nitrophenyl esters

Active 4-dodecanoyl-2-nitrophenyl esters of β-alanine, β-alanyl-β-alanine, and β-alanyl-β-alanyl-β-alanine were prepared, and tried to polymerize in various solvents. Nonpolar solvents were found to be convenient for the polycondensation reaction. The yield of the polycondensation was high for the monopeptide ester, and less for the dipeptide and tripeptide esters. The effect of temperature on the polycondensation reaction was also studied.     

Fracture Energies of Tape-Cast Silicon Nitride with β-Si3N4 Seed Addition

The fracture energies of the tape-cast silicon nitride with and without 3 wt% rod-like β-Si₃N₄ seed addition were investigated by a chevron-notched-beam technique. The material was doped with Lu₂O₃–SiO₂ as sintering additives for giving rigid grain boundaries and good heat resistance. The seeded and tape-cast silicon nitride has anisotropic microstructure, where the fibrous grains grown from seeds were preferentially aligned parallel to the casting direction. When a stress was applied parallel to the fibrous grain alignment direction, the strength measured at 1500°C was 738 MPa, which was almost the same as room temperature strength 739 MPa. The fracture energy of the tape-cast Si₃N₄ without seed addition was 109 and 454 J/m² at room temperature and 1500°C, respectively. On the contrary, the fracture energy of the seeded and tape-cast Si₃N₄ was 301 and 781 J/m² at room temperature and 1500°C, respectively, when a stress was applied parallel to the fibrous gain alignment. The large fracture energies were attributable primarily to the unidirectional alignment fibrous Si₃N₄ grains.     

Antitumor activity of synthetic alkylphospholipids with or without PAF activity

1-O-Octadecyl-2-O-methyl-sn-glycero-3-phosphocholine (ET-18-OMe) has been reported to possess definite antitumor activity in vivo. Twenty-two alkyl lysophospholipid analogs were chemically synthesized, and their antitumor activity against mouse experimental tumors (Sarcoma 180, MM46, P388) was examined. Among them, 1-O-octadecyl-2-O-acetoacetyl-rac-glycerol-3-phosphocholine was found to show antitumor activity similar to ET-18-OMe with less acute toxicity. Intravenous injection of the ET-18-OMe withsn-3 configuration retarded the subcutaneous growth of Sarcoma 180 cells effectively, while the growth inhibition by thesn-1 isomer was much less effective. This stereospecificity was similar to that observed in their activities as platelet-activating factor (PAF) agonists. The acetoacetyl compound, another PAF agonist, showed similar stereospecific antitumor action in vivo. These findings suggest that some alkyl lysophospholipids may activate host cells to a cytostatic stage against tumor cells in vivo through binding to a PAF receptor. Our preliminary results indicated that the responsible cells under these conditions might be primarily immature macrophages present in the bone marrow. No appreciable or even adverse stereospecificity was observed in the different sets of experiments where the activity of ET-18-OMe against MM46 tumor cells in vivo or the direct cytotoxicity against human promyelocytic leukemia HL-60 cells in vitro was examined. Under, some conditions, the antitumor activity of ET-18-OMe in vivo may be revealed through direct cytotoxicity and/or modulation of the host defense system by “nonspecific” mechanisms. Some alkylphospholipids without PAF activity may also show antitumor activity through similar, “nonspecific” mechanisms.     

Validation of Platelet Counting Accuracy With the Celltac F Automated Hematology Analyzer

Rapid and accurate analysis of platelet count plays an important role in evaluating hemorrhagic status. Therefore, we evaluated platelet counting performance of a hematology analyzer, Celltac F (MEK-8222, Nihon Kohden Corporation, Tokyo, Japan), that features easy use with low reagent consumption and high throughput while occupying minimal space in the clinical laboratory. All blood samples were anticoagulated with dipotassium ethylenediaminetetraacetic acid (EDTA-2K). The samples were stored at room temperature (18^{^}C–22^{^}C) and tested within 4 hours of phlebotomy. We evaluated the counting ability of the Celltac F hematology analyzer by comparing it with the platelet counts obtained by the flow cytometry method that ISLH and ICSH recommended, and also the manual visual method by Unopette (Becton Dickinson Vacutainer Systems). The ICSH/ISLH reference method is based on the fact that platelets can be stained with monoclonal antibodies to CD41 and/or CD61. The dilution ratio was optimized after the precision, coincidence events, and debris counts were confirmed by the reference method. Good correlation of platelet count between the Celltac F and the ICSH/ISLH reference method (r = 0.99, and the manual visual method (r= 0.93) were obtained. The regressions were y = 0.90 x+9.0 and y=1.11x+8.4, respectively. We conclude that the Celltac F hematology analyzer for platelet counting was well suited to the ICSH/ISLH reference method for rapidness and reliability.     

Gradient orientation pattern matching with the Hamming distance

This paper presents a novel pattern matching technique that is robust to illumination changes and the occlusion problem. The technique is based on the matching of gradient orientations in place of traditional image features such as intensities or gradients. Gradient orientations depend on the texture in an image. They are known to be insensitive to changes of image intensities that are often caused by time-varying illuminations or the auto-gain control (AGC) function of the camera. Moreover,the proposed method employs a voting strategy in the process of matching gradient orientations. The method works remarkably well even when a large part of the pattern is occluded with a foreign object. Consequently, the proposed method is robust to both irregular lighting conditions and the occlusion problem.     

Characterization of extended filters in residuated lattices

We give a characterization theorem of extended filters on residuated lattices, from which many results are immediately obtained. We show that, for a bounded integral commutative residuated lattice X, (1) an extended filter $E_F (B)$ associated with $B$ is characterized by $E_F (B) = [B) \rightarrow F$ , where $B\subseteq X$ and $F$ is a filter of $X$ ; (2) the class $E(B)$ of all extended filters associated with $B$ is a complete Heyting algebra. (3) the class $S(B)$ of all stable filters relative to $B\subseteq X$ is also a complete Heyting algebra.     

Mechanical properties of DLC films prepared inside of micro-holes by pulse plasma CVD

Diamond-like carbon (DLC) films are metastable amorphous carbon materials with superior tribological characteristics. In order to improve wear resistance of micro-extrusion dies with numerous imperceptible holes, DLC films were deposited on the inner wall surface of model dies with holes of 2 and 0.9 mm in diameter, and 20 mm in depth by using pulse plasma CVD method. This paper will discuss how argon gas, deposition pressure and time affect the characteristics of films deposited on the inner wall surface of dies. This micro-coating method can be applied widely for inner wall surface treatment of components with thin holes.     

Syntheses and conformational studies of poly(S-menthyloxycarbonylmethyl l- and d-cysteines)

S-menthyloxycarbonylmethyl l- and d-cysteines were prepared by the reaction of l- or d-cysteine and (?)-menthyl chloroacetate in liquid ammonia and were then polymerized to poly(S-menthyloxycarbonylmethyll- and d-cysteines) by the N-carboxyanhydride (NCA) method. From the results obtained by means of infra-red spectra, X-ray diffractions, optical rotatory dispersions (o.r.d.), and circular dichroisms (c.d.), $\text{poly}\text{(S-}\text{menthyloxycarbonylmethyl-}\text{l}\text{-cysteine}\text{)}$ was found to be a right-handed α-helix in the solid state and in ethyl ether/chloroform and chloroform solutions. Similarly, $\text{poly}\text{(S-}\text{menthyloxycarbonylmethyl-}\text{d}\text{-cysteine}\text{)}$ was a left-handed α-helix. The helix-coil transition of these polymers was observed in the vicinity of 3–4% trifluoroacetic acid (TFA) in chloroform/TFA mixtures.