Long-term trends of electric efficiencies in electricity generation in developing countries

This analysis provides time-series data on electric efficiencies for 138 countries and regions, covering all fossil fuels for the period 1971–2005, with an emphasis on non-Organization for Economic Cooperation and Development (OECD) countries. Fossil fuel consumption for electricity generation in non-OECD countries now exceeds that in the OECD. The historical performance of the top five non-OECD consumers of each fossil fuel for which reliable data are available is presented and discussed. For each fuel, the countries that lead the world in efficiency are used for benchmarks; bringing the rest of the world up to these standards would result in energy savings of 26 EJ (equivalent to 5% of global energy consumption) and CO₂ emissions reduction of 2.1 Pg (equivalent to 8% of global CO₂ emissions). Coal showed the largest potential margin of improvement for both energy and CO₂, with possible savings equivalent to 3% of current global energy consumption and 5% of global CO₂ emissions. The gap in electric efficiency between OECD and non-OECD countries over the past 35 years has widened for coal-fired generation, stayed relatively constant for natural gas, but has shrunk for petroleum. The results show the very gradual nature of overall efficiency improvements and the significant differences among regions and countries.     

Analytical tool development for coarse break-up of a molten jet in a deep water pool

A computer code JASMINE-pre was developed for the prediction of premixing conditions of fuel–coolant interactions and debris bed formation behavior relevant to severe accidents of light water reactors. In JASMINE-pre code, a melt model which consists of three components of sub-models for melt jet, melt particles and melt pool, is coupled with a two-phase flow model derived from ACE-3D code developed at JAERI. The melt jet and melt pool models are one-dimensional representations of a molten core stream falling into a water pool and a continuous melt body agglomerated on the bottom, respectively. The melt particles generated by the melt jet break-up are modeled based on a Lagrangian grouped particle concept. Additionally, a simplified model pmjet was developed which considers only steady state break-up of the melt jet, cooling and settlement of particles in a stationary water pool. The FARO corium quenching experiments with a saturation temperature water pool and a subcooled water pool were simulated with JASMINE-pre and pmjet. JASMINE-pre reproduced the pressurization and fragmentation behavior observed in the experiments with a reasonable accuracy. Also, the influences of model parameters on the pressurization and fragmentation were examined. The calculation results showed a quasi-steady state phase of melt jet break-up during which the amount of molten mass contained in the premixture was kept almost constant, and the steady state molten premixed masses evaluated by JASMINE-pre and pmjet agreed well.     

A method to differentiate between thyroglobulin derived from normal thyroid tissue and from thyroid carcinoma based on analysis of reactivity to lectins

BACKGROUND: Positron emission tomography (PET) allows the measurement of benzodiazepine-gamma-aminobutyric acidA (GABA(A)) receptor kinetics. We employed flumazenil radiolabeled with carbon 11, a radioligand that labels the benzodiazepine site on the GABA(A) receptor, and fully quantitative, high-sensitivity PET to test the hypothesis that central benzodiazepine site binding is decreased in medication-free patients with panic disorder. METHODS: We compared 7 patients with panic disorder who had been off medication for at least 6 months and who had never abused alcohol with 8 healthy controls. The resulting parametric voxel-by-voxel maps were analyzed by voxel-based and region of interest-based methods using both parametric and nonparametric statistics. RESULTS: The major finding was that there is a global reduction in benzodiazepine site binding throughout the brain in patients with panic disorder compared with controls. There were sex differences in the 2 samples, but a separate analysis excluding women led to the same conclusions. In addition, the loci with the largest regional decrease in binding (right orbitofrontal cortex and right insula) were areas thought to be essential in the central mediation of anxiety. CONCLUSION: These results must be considered preliminary but are congruous with previous clinical psychopharmacologic evidence of involvement of the benzodiazepine-GABA(A) receptor and demonstrate that decreased flumazenil binding at this site may underlie panic disorder.     

A subcloned human esophageal squamous cell carcinoma cell line with low thrombomodulin expression showed increased invasiveness compared with a high thrombomodulin-expressing clone--thrombomodulin as a possible candidate for an adhesion molecule of squamous cell carcinoma

Inside-out vesicles of plasma membranes prepared from a plant source were used as models to investigate effects of centrifugal forces on separations of early and late endosome populations by aqueous two-phase partition. Endosome subpopulations were resolved readily by preparative free-flow electrophoresis where acidification of the interiors of late endosomes occurred upon addition of ATP to activate a proton translocating ATPase. The resultant increased diffusion potential provided for a surface difference between late and early endosomes to permit electrophoretic separation. With the plant membranes, unincubated inside-out plasma membrane vesicles modeled early endosomes, whereas inside-out vesicles incubated with 1 mM ATP modeled late endosomes. A latent, 2,4-dichlorophenoxyacetic acid (2,4-D)-(auxin)-stimulated NADH:protein disulfide reductase measured spectrophotometrically was used as an enzymatic marker for both populations of inside-out vesicles. Phase partition behavior of each population was quantitated using total protein as the parameter.     

New modifications of poly(vinyl alcohol)s and their applications

Poly(vinyl alcohol) (PV-OH), prepared from poly(viny) acetate), is used widely in many industries. Various grades have been produced, with different degree of polymerization and degree of hydrolysis. Recently, novel modified (PV-OH)s with anion, cation, silanol or hydrophobic groups have been studied and developed. They have new properties in addition to those of ordinary PV-OH and have new applications. The methods of modification and the characteristics and some applications of the modified polymers are described.     

Phase and magnetic properties of iron oxide clusters in 20CaO·20SiO2·7Fe2O3·6FeO glasses

The annealing of 20CaO·20SiO₂·7Fe₂O₃·6FeO glasses at 973K in vacuo produced clusters of iron oxide, the shape of which was nearly spherical and the diameter distributed in the narrow range 25–115Å. The phase of clusters was identified to be Fe³⁺(Fe³⁺ _{poststagger|1.30}Fe²⁺ _{poststagger|0.55}V_0.15)·O₄ in the inverse spinel structure based upon the Mössbauer spectra and x-ray diffraction profiles. The clusters exhibited superparamagnetism and their effective anisotropy energy constant was inversely proportional to the cluster diameter. The magnetization of the glasses measured by a vibrating sample magnetometer was 7.2 × 10^-6 Wbmkg^-1 at 10 kOe at room temperature and smaller than the value calculated assuming that the whole clusters have superparamagnetism. These results suggest the pinning of spins near the cluster surface.     

Study of in vivo tumor state and response to therapy by analysis of DNA distribution

Comparative studies of cefamandole and cephalothin were carried out in 32 cancer patients. After rapid intravenous injection of 1 gm cefamandole or cephalothin, the peak mean serum concentrations in 11 patients achieved at 0.25 hr were 103.4 mcg/ml and 56.7 mcg/ml, respectively. Except at 6 hr, the serum concentration of cefamandole was higher (p less than 0.05) at all times. The terminal half-lives (t 1/2) were similar, being 1.2 hr for cefamandole and 1.0 hr for cephalothin. Cefamandole, 1 gm intramuscularly, induced a peak mean serum concentration of 26.6 mcg/ml at 1 hr, with a slow decay. Intermittent cefamandole (2 gm intravenously every 6 hr) induced very high mean serum concentrations (7 patients), but at 4 hr the concentrations were similar to those after 1 gm intravenously. Per cent of urinary excretion was similar for both drugs regardless of dose and mode of administration. Continuous-infusion cefamandole or cephalothin (2 gm loading followed by 2 gm every 6 hr) in 14 patients showed consistently higher serum concentrations for cefamandole (p less than 0.05) over a 5-day period. There was no evidence of drug accumulation in the multiple-dose studies. Both the single- and multiple-dose schedules were well tolerated.