Effects of rice cleaning and cooking process on the residues of flutolanil,fenobucarb, silafluofen and buprofezin in rice

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.     

Open dumping site in Asian developing countries: a potential source of polychlorinated dibenz-p-dioxins and polychlorinated dibenzofurans

Open landfill dumping areas for municipal wastes in Asian developing countries have recently received particular attention with regard to environmental pollution problems. Because of the uncontrolled burning of solid wastes, elevated contamination by various toxic chemicals including dioxins and related compounds in these dumping sites has been anticipated. In this study, concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (PCBs) were determined in soils from dumping sites in the Philippines, Cambodia, India, and Vietnam. Residue concentrations of PCDD/Fs and coplanar PCBs in dumping site soils were apparently greater than those in soils collected in agricultural or urban areas far from dumping sites, suggesting that dumping sites are potential sources of PCDD/Fs and related compounds. Observed PCDD/F concentrations in soils from dumping sites in the Philippines and Cambodia were comparable or higher than those reported for dioxin-contaminated locations in the world (e.g., near the municipal waste incinerators and open landfill dumping sites). Homologue profiles of PCDD/Fs in dumping site soils from the Philippines and, to a lesser extent, from Cambodia and India reflected patterns of samples representing typical emissions, while profiles of agricultural or urban soils were similar to those of typical environmental sinks. This result suggests recent formation of PCDD/Fs in dumping site areas and that open dumping sites are a potential source of dioxins in Asian developing countries. Uncontrolled combustions of solid wastes by waste pickers, generation of methane gas, and low-temperature burning can be major factors for the formation of dioxins in dumping sites. Elevated fluxes of PCDD/Fs to soils in dumping sites were encountered in the Philippines, Cambodia, India, and Vietnam-Hanoi, and these levels were higher than those reported for other countries. Considerable loading rates of PCDD/Fs in the dumping sites of these countries were observed, ranging from 20 to 3900 mg/yr (0.12-35 mg TEQ/yr). PCDD/F concentrations in some soil samples from the Philippines, Cambodia, India, and Vietnam-Hanoi exceeded environmental guideline values, suggesting potential health effects on humans and wildlife living near these dumping sites. The estimated intakes of dioxins via soil ingestion and dermal exposure for children were higher than those for adults, suggesting greater risk of dioxin exposure for children in dumping sites. To our knowledge, this is the first comprehensive study on PCDD/Fs contamination in open dumping sites of Asian developing countries. On the basis of the result of this study, we have addressed a new environmental issue that open dumping sites are potential sources of PCDD/Fs and related compounds, and dioxin contamination in dumping sites may become a key environmental problem in developing countries.     

Interaction of modified tail-anchored proteins with liposomes: effect of extensions of hydrophilic segment at the COOH-terminus of holo-cytochromes b₅

A group of membrane proteins having a single COOH-terminal hydrophobic domain capable of post-translational insertion into lipid bilayer is known as tail-anchored (TA) proteins. To clarify the insertion mechanism of the TA-domain of human cytochrome b(5) (Hcytb5) into ER membranes, we produced and purified various membrane-bound forms of Hcytb5 with their heme b-bound, in which various truncated forms of NH(2)-terminal bovine opsin sequence were appended at the COOH-terminus of the native form. We analyzed the integration of the TA-domains of these forms onto protein-free liposomes. The integration occurred efficiently even in the presence of a small amount of sodium cholate and, once incorporated, such proteoliposomes were very stable. The mode of the integration was further analyzed by treatment of the proteoliposomes with trypsin either on the extravesicular side or on the luminal side. LC-MS analyses of the trypsin digests obtained from the proteoliposomes indicated that most of the C-terminal hydrophilic segment of the native Hcytb5 were exposed towards the lumen of the vesicles and, further, a significant part of the population of the extended C-terminal hydrophilic segments of the modified Hcytb5 were exposed in the lumen as well, suggesting efficient translocation ability of the TA-domain without any assistance from other protein factors. Present results opened a route for the use of the C-terminal TA-domain as a convenient tool for the transport of proteins as well as short peptides into artificial liposomes.     

Stabilization of a Power System Including Inverter‐Type Distributed Generators by a Virtual Synchronous Generator

The capacity of distributed generators (DGs) connected to the grid by inverters is growing year after year. The inverters are generally controlled by a phase locked loop (PLL) in order to achieve synchronization with the power system frequency. Power systems may become unstable as the capacity of the inverter‐type DGs continues to increase, because the inverter frequency is controlled just to follow the frequency determined by other synchronous generators. It has been suggested that inverters be controlled to behave like a synchronous generator. This concept is referred to as the virtual synchronous generator (VSG). In this paper, a control scheme for a VSG is presented, and the design method for the required energy storage and the capacity for grid stabilization control by a VSG is investigated by computer simulations.     

Reduction of Vibration in Concentrated Winding Permanent Magnet Synchronous Motor by Means of Skew Effects of Rotor

Global warming and the problem of successfully incorporating environmental safeguards are promoting the need for a more power‐efficient motor. Therefore, as a driving source, permanent magnet synchronous motors (PMSMs) with concentrated winding are widely used in a variety of fields. However, a PMSM with a concentrated winding generates more vibration than one with a distributed winding because of the radial electromagnetic force. This paper describes the effect of a new skewed rotor on the characteristics of a concentrated winding PMSM. We investigated this effect by three‐dimensional finite element method (3D FEM) analysis and measurement. We also demonstrate that the proposed rotor is effective in reducing the radial electromagnetic force without decreasing motor efficiency. © 2014 Wiley Periodicals, Inc. Electr Eng Jpn, 187(2): 33–43, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22400     

Interactive visualization of three-dimensional magnetic fields

In order to observe the physical values (magnetic flux density and eddy current) in 3D magnetic field analysis, an interactive and highly manipulative visualization system depicting stereo images is intalled in a graphics workstation with high functional graphic processors. The system has the following characteristics:

• 1 An interactive and highly manipulative menu window with many functions: it enables visualization of complex phenomena in a 3D field through observation of various combinations of physical values from various viewpoints.
• 2 Simultaneous display of both magnetic flux density and eddy current by using the appropriate use of two colour display methods for stream lines and distribution maps of density: this function facilitates observation of the mutual relations between two physical values in a 3D field.
• 3 Animations and stereo displays: since they give extremely distinct images, observers can easily understand even highly complex 3D phenomena.

In this paper, the calculation method of density vectors, their display methods, and interactive functions are described. Some examples are also illustrated.     

Preparation of poly(ethylene glycol)-modified poly(amidoamine) dendrimers with a shell of hydrophobic amino acid residues and their function as a nanocontainer

We studied the use of poly(ethylene glycol) (PEG)-modified dendrimers as a nanocapsule with a biocompatible surface. We designed PEG-modified dendrimers having a shell of hydrophobic amino acid residues in the peripheral moiety of the dendrimer to increase their encapsulation ability. Subsequently, l-phenylalanine or γ-benzyl-l-glutamate residues were introduced to all chain ends of the poly(amidoamine) G4 dendrimers. Furthermore, PEG (MW 2000) chains were attached to the amino acid residues. These hydrophobic amino acid residues rendered the PEG-modified dendrimers as more compact. After binding of Rose Bengal (RB) guest molecules to dendrimers, an assay using the Klotz plot showed that the hydrophobic amino acid layer slightly affected the guest site number, but significantly increased intrinsic binding of the dendrimers to guest molecules. The PEG-modified dendrimers with the hydrophobic amino acid layer were better able to retain guest molecules than the dendrimer without the layer: they are therefore useful for drug delivery.     

Colored amorphous silica-based powder with TiN nanocrystals precipitated by ammonolysis of Ti–Si–O ternary glass

Coloration of amorphous silica powder containing titania was investigated by nitridation in an ammonia flow. The oxide precursors were obtained by the hydrolysis of a mixture of tetraethyl orthosilicate (TEOS) and tetrabutoxy titanium (TBT). The color changed with the amount of TBT in the mixture, the hydrolysis pH and the ammonolysis temperature. The original white color of the 8 mol% TBT powder hydrolyzed under basic pH conditions changed to pale goldenrod at 700°C, then to dark olive green at 800°C, and further darkened with increasing ammonolysis temperature. A steel-blue color appeared at 900°C for the powder obtained with 3 mol% TBT, and increased in darkness at 1000°C. A similar bluish color was observed for powders obtained by acidic hydrolysis after ammonolysis above 900°C, and this was independent of the amount of titania, although the chroma decreased with increasing firing temperature for the powder with 3 mol% TBT. The ammonolysis powder products were characterized using X-ray diffraction (XRD), electron probe micro analysis (EPMA), transmission electron microscopy-electron energy-loss spectroscopy (TEM-EELS), scanning transmission electron microscopy-high-angle annular dark-field imaging (STEM-HAADF) and Ti–K edge X-ray absorption fine structure (XAFS). The color change was related to both precipitated TiN nanocrystals and residual titanium in the amorphous silica matrix. The TiN exhibited a goldish reflection and also plasmonic absorption from light blue to gray depending on the TiN crystallite size. The plasmonic absorption and resonance of nanocrystalline TiN will be useful similarly to that of gold in nanotechnology for various kinds of energy application.