Synthesis and properties of bismaleimide resins containing ether bonds

New bismaleimides containing ether bonds were prepared. The thermal properties of the bismaleimides were investigated by differential scanning calorimetry (DSC). The effects of structure of the bismaleimides and curing conditions on the thermal and mechanical properties of the cured resins such as initial decomposition temperature (T_d), glass transition temperature (T_g), and flexural strength were studied. The introduction of ether bonds to bismaleimide resins decreased the brittleness of the resins without reductions in their heat-resistant properties.     

Preparation and characterization of TiO2 and polymer nanocomposite films with high refractive index

Novel nanocomposite films of TiO₂ nanoparticles and hydrophobic polymers having polar groups, poly (bisphenol‐A and epichlorohydrin) or copolymer of styrene and maleic anhydride, with high refractive indices, high transparency, no color, solvent‐resistance, good thermal stability, and mechanical properties were prepared by incorporating surface‐modified TiO₂ nanoparticles into polymer matrices. In the process of preparing colloidal solution of TiO₂ nanoparticles, severe aggregation of particles can be reduced by surface modification using carboxylic acids and long‐chain alkyl amines. These TiO₂ nanoparticles dispersed in solvents were found not to aggregate after mixing with polymer solutions. Transparent colorless free‐standing films were obtained by drying a mixture of TiO₂ nanoparticles colloidal solution and polymer solutions in vacuum. Transmission electronic microscopic studies of the films suggest that the TiO₂ nanoparticles of 3–6 nm in diameter were dispersed in polymer matrices while maintaining their original size. Thermogravimetric analysis results indicate that the nanocomposite film has good thermal stability and the weight fraction of observed TiO₂ nanoparticles in the film is in good accordance with that of theoretical calculations. The refractive index of nanocomposite films of TiO₂ and poly(bisphenol‐A and epichlorohydrin) was in the range of 1.58–1.81 at 589 nm, which linearly increased with the content of TiO₂ nanoparticles from 0 to 80 wt %. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Shape memorizing properties of a hydrogel of poly(vinyl alcohol)

Hydrogel prepared by repetitive freezing and thawing of poly(vinyl alcohol) aqueous solution was chemically crosslinked with glutaraldehyde. The chemically crosslinked hydrogel hardly changed its physical appearance, and showed good elasticity and strength as original gel. However, after treating in boiling water, it swelled a little, depending on the condition of the chemical treatment. The melted gel thus obtained showed shape memorizing property, that is, it could firmly hold nearly 200% of strain, keeping its original high elasticity. The strain could be released very quickly (< 1 s) in boiling water, and the gel was suggested to be applied to a new type of gel actuator. X-ray diffraction study revealed that the melted gel does not necessarily reform the physical crosslinks in exactly the same manner as the original gel in the process of shape restoring, but the distribution of the physical crosslinks can be restored as they were. It was suggested that the chemical crosslinks which remember the distribution of the physical crosslinks plays a critical roll in the shape restoring process.     

An apparent ensemble effect in the oxidative coupling of methane on hydroxyapatites with incorporated lead

The introduction of small quantities of lead into calcium hydroxyapatite catalysts produces marked increases in the selectivity to C₂₊ hydrocarbons, while the conversion of methane remains relatively constant. Small surface concentrations of lead are sufficient to achieve C₂₊ selectivities of 80 and 90%, with oxygen and nitrous oxide, respectively, in contrast with 18 and 46%, respectively, obtained in the absence of lead. Since surface concentration of lead species sufficient to stabilize pairs of methyl radicals in close proximity to each other would be expected to facilitate the formation of C₂ hydrocarbons, an ensemble effect appears to be extant.     

Preparation and structure of poly(vinyl alcohol)–poly(vinyl acetate) composite porous membrane

The preparation of poly(vinyl alcohol) (PVA)–poly(vinyl acetate) (PVAc) composite porous membrane was investigated by extracting PVAc with solvent from films of PVAc lattices which were obtained by the emulsion polymerization of vinyl acetate (VAc) in the presence of PVA. The formation of the porous membrane depended upon whether or not PVAc in the latex film was easily extracted with solvent. In the case of using hydrogen peroxide (HPO)–tartaric acid (TA) as an initiator, in the film of the latex which was produced from the batch method in which all ingredients of the batch were put into the reaction vessel before starting polymerization, PVAc could be extracted over 90% of total PVAc with common organic solvents. In the film of the latex which was produced from the dropwise addition method of VAc and initiator, the PVAc extraction was about 20-30%. On the other hand, in the case of using ammonium persulfate as an initiator, the desired porous membrane was not obtained. The structure of the porous membrane obtained from the latex of the batch method by using HPO—TA consisted of spherical cells which were made up of PVA and grafted PVAc or insoluble PVAc like microgels, which were not extracted with organic solvent and were connected by small pores. The PVA—PVAc composite porous membrane is permeated by n-hexane with 5.58 × 10² mL/cm²·s at 0.5 kg/cm², by benzene with only 1.33 × 10^?3mL/cm²·s even at 60 kg/cm².     

Effect of polymer density on polyethylene hollow fiber membrane formation via thermally induced phase separation

Microporous high‐density polyethylene (HDPE) and low‐density polyethylene (LDPE) hollow fiber membranes were prepared from polyethylene–diisodecyl phthalate solution via thermally induced phase separation. Effect of the polyethylene density on the membrane structure and performance was investigated. The HDPE membrane showed about five times higher water permeability than the LDPE membrane because it had the larger pore and the higher porosity at the outer membrane surface. The formation of the larger pore was owing to both the initial larger structure formed by spinodal decomposition and the suppression of the diluent evaporation from the outer membrane surface due to the higher solution viscosity. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 471–474, 2004     

Antitumor activity of synthetic alkylphospholipids with or without PAF activity

1-O-Octadecyl-2-O-methyl-sn-glycero-3-phosphocholine (ET-18-OMe) has been reported to possess definite antitumor activity in vivo. Twenty-two alkyl lysophospholipid analogs were chemically synthesized, and their antitumor activity against mouse experimental tumors (Sarcoma 180, MM46, P388) was examined. Among them, 1-O-octadecyl-2-O-acetoacetyl-rac-glycerol-3-phosphocholine was found to show antitumor activity similar to ET-18-OMe with less acute toxicity. Intravenous injection of the ET-18-OMe withsn-3 configuration retarded the subcutaneous growth of Sarcoma 180 cells effectively, while the growth inhibition by thesn-1 isomer was much less effective. This stereospecificity was similar to that observed in their activities as platelet-activating factor (PAF) agonists. The acetoacetyl compound, another PAF agonist, showed similar stereospecific antitumor action in vivo. These findings suggest that some alkyl lysophospholipids may activate host cells to a cytostatic stage against tumor cells in vivo through binding to a PAF receptor. Our preliminary results indicated that the responsible cells under these conditions might be primarily immature macrophages present in the bone marrow. No appreciable or even adverse stereospecificity was observed in the different sets of experiments where the activity of ET-18-OMe against MM46 tumor cells in vivo or the direct cytotoxicity against human promyelocytic leukemia HL-60 cells in vitro was examined. Under, some conditions, the antitumor activity of ET-18-OMe in vivo may be revealed through direct cytotoxicity and/or modulation of the host defense system by “nonspecific” mechanisms. Some alkylphospholipids without PAF activity may also show antitumor activity through similar, “nonspecific” mechanisms.     

Performance of solvothermally prepared Ga2O3-Al2O3 catalysts for SCR of NO with methane

The solvothermal reaction of mixtures of aluminum isopropoxide (AIP) and gallium acetylacetonate (Ga(acac)₃) directly yielded the mixed oxides of γ-Ga₂O₃-Al₂O₃. In the solvothermal synthesis, the crystal structure of mixed oxides was controlled by the initial formation of γ-Ga₂O₃ nuclei. The mixed oxides prepared in diethylenetriamine have extremely high activities for selective catalytic reduction (SCR) of NO with methane as a reducing agent. With increasing crystallite size of the spinel structure, the catalytic activity increased. The ratio of the amount of methane consumed by combustion to total methane conversion was proportional to the density of acid sites on the surface of the mixed oxides. The mixed oxide catalysts prepared in diethylenetriamine had lower densities of acid sites and showed a higher methane-efficiency for CH₄-SCR than those prepared in other solvents. These catalysts maintained their high activity even when the reaction was carried out under the severe conditions (i.e., high space velocity and low NO concentration).     

Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.     

Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).