Nondestructive determination of fatty acid composition of husked sunflower (Helianthus annua L.) seeds by near-infrared spectroscopy

Determination of the fatty acid composition of sunflower (Helianthus annua L.) seeds by near-infrared (NIR) spectroscopy was examined. Sunflower seeds were husked (removed from their hulls by a husking machine or manually with a knife). NIR spectra of these seeds were scanned from 1100 to 2500 nm at 2-nm intervals in a whole-grain cell with a wideangle moving drawer for machine-husked seeds or in a single-grain cup for a manually husked single-grain seed. The extracted oils from machine-husked seeds also were scanned by sandwiching them between a pair of slide glasses to create a thin layer and by placing them on a syrup cup. For extracted oil, the absorption band around 1720 nm filled out to the shorter wavelength region in the NIR second-derivative spectra as the percentage of the linoleic acid moiety increased, because linoleic acid absorbs in this region. On the other hand, for husked seeds and for a single-grain seed, as the percentage of linoleic acid increased, the trough at 1724 nm where oleic and saturated acids absorb decreased in the second-derivative NIR spectra. Determination of the fatty acid composition of sunflower seeds could be carried out successfully according to the NIR spectral pattern for both extracted oil (r=−0.989) and kernel seed (r=−0.993). This is important, especially for a manually husked single-grain seed (r=−0.971), because it can still be germinated after such nondestructive analysis.     

Crack-Healing Behavior of Si3N4/SiC Ceramics under Cyclic Stress and Resultant Fatigue Strength at the Healing Temperature

Si₃N₄/SiC composite ceramics were sintered and subjected to three-point bending. A semi-elliptical surface crack of 100 μm surface length was made on each specimen. The crack-healing behavior under cyclic stress of 5 Hz, and resultant cyclic fatigue strengths at healing temperatures of 1100° and 1200°C, were systematically investigated. The main conclusions are as follows: (1) Si₃N₄/SiC composite ceramics have an excellent ability to heal a crack at 1100° and 1200°C. (2) This sample could heal a crack even under cyclic stress at a frequency of 5 Hz. (3) The crack-healed sample exhibited quite high cyclic fatigue strength at each crack-healing temperature, 1100° and 1200°C.     

Synthesis of CeO2-ZrO2 solid solution by glycothermal method and its oxygen release capacity

The glycothermal (GT) reaction of Ce acetate and Zr alkoxide directly yielded CeO₂-ZrO₂ solid solutions in a region of low Ce content ≤40 mol%. Of the CeO₂-ZrO₂ solid solutions obtained by the GT method and subsequent calcination at 500 or 800 °C, the sample with 20 mol% Ce content had the largest BET surface area. This sample exhibited the highest Ce-based oxygen release capacity in the whole Ce/Zr composition range. The oxygen release capacities of CeO₂-ZrO₂ solid solutions synthesized by the GT method were much larger than those of the samples prepared by a coprecipitation (CP) method. The Reitveld analysis and the repetitive reduction-oxidation experiment indicated that the CeO₂-ZrO₂ solid solution synthesized by the GT method has a homogeneous structure as compared with that prepared by the CP method.     

Mechanical properties of silicon-doped diamond-like carbon films prepared by pulse-plasma chemical vapor deposition

Silicon-doped diamond-like carbon (Si-DLC) films were prepared by dc pulse-plasma chemical vapor deposition (CVD), using a mixture of acetylene (C₂H₂) and tetramethylsilane (TMS) as the material gas. The pulse voltage was varied from − 2 to − 5 kV, and the TMS flow ratio (TMS/(C₂H₂ + TMS)) was varied from 0 to 40%. At a pulse voltage of − 2 kV, an increase in TMS flow ratio leads to a decrease in hardness. In contrast, at a pulse voltage of − 5 kV, an increase in TMS flow ratio leads to a slight increase in hardness. The high hydrogen concentration in the films due to an increase in TMS flow ratio promotes the formation of polymeric sp³ C―H bonds, resulting in the fabrication of soft films at a low pulse voltage of − 2 kV. However, an increase in the effect of ion peening on the growth face results in the formation of hard films at a high pulse voltage of − 5 kV. Then, at a pulse voltage of − 5 kV fabricating hard Si-DLC films, an increase in TMS flow ratio leads to an increase in the silicon content in the films, resulting in a decrease in the friction coefficient. Therefore, it is clarified that Si-DLC films fabricated by dc pulse-plasma CVD under a high pulse voltage and high TMS flow ratio exhibit high hardness and a low friction coefficient. Moreover, to investigate the friction coefficient of Si-DLC films fabricated by dc pulse-plasma CVD, films deposited by dc plasma CVD were also evaluated. To obtain the same low friction coefficient, dc pulse-plasma CVD requires less TMS than dc plasma CVD. Hence, it is also clarified that Si-DLC films can be fabricated at a low cost by dc pulse-plasma CVD.     

Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

Activation of Mast-Cell-Derived Chymase in the Lacrimal Glands of Patients with IgG4-Related Ophthalmic Disease

The purpose of this present study was to investigate the distribution and expression of chymase in the lacrimal glands (LGs) of patients afflicted with IgG4-related ophthalmic disease (IgG4-ROD). LGs from patients with severe canalicular obstruction were considered the control group. Toluidine blue staining confirmed a significant increase in the number of mast cells in the LGs obtained from the IgG4-ROD patients. In addition, immunostaining of serial sections from the LGs showed a significant increase in the number of chymase-positive cells and tryptase-positive cells in the IgG4-ROD LGs compared to the normal control LGs. The mRNA expression of chymase, tryptase, TGF-β1, and collagen-I tended to increase in the IgG4-ROD LGs. Immunostaining of vimentin and α-smooth muscle actin (α-SMA) showed that myofibroblasts were the main cellular components in severely fibrotic regions of LGs in patients with IgG4-ROD. Linear regression analyses on the number of mast cells, chymase-positive cells, and tryptase-positive cells revealed significant positive correlations between those respective cells. Our findings suggest that chymase may play a role in the fibrotic disorder of IgG4-ROD LGs through the regulation of TGF-β1 activation and collagen-I deposition, and that it may be a therapeutic target for patients afflicted with IgG4-ROD.     

Pathophysiological Roles of Actin-Binding Scaffold Protein,Ezrin

Ezrin is one of the members of the ezrin/radixin/moesin (ERM) family of proteins. It was originally discovered as an actin-binding protein in the microvilli structure about forty years ago. Since then, it has been revealed as a key protein with functions in a variety of fields including cell migration, survival, and signal transduction, as well as functioning as a structural component. Ezrin acts as a cross-linker of membrane proteins or phospholipids in the plasma membrane and the actin cytoskeleton. It also functions as a platform for signaling molecules at the cell surface. Moreover, ezrin is regarded as an important target protein in cancer diagnosis and therapy because it is a key protein involved in cancer progression and metastasis, and its high expression is linked to poor survival in many cancers. Small molecule inhibitors of ezrin have been developed and investigated as candidate molecules that suppress cancer metastasis. Here, we wish to comprehensively review the roles of ezrin from the pathophysiological points of view.     

On the separation in 2-period double round robin tournaments with minimum breaks

This paper considers the separation in 2-period double round robin tournaments (2P-DRRTs) with minimum breaks. The separation is a lower bound on the number of slots between the two games with the same opponents. None of known schemes provides 2P-DRRTs with minimum breaks and a positive separation. We first propose a new scheme to generate 2-separation 2P-DRRTs with minimum breaks, based on single round robin tournaments (SRRTs) with minimum breaks which have the last break in the third slot from the end. Our experiment results show that such SRRTs exist for 8-68 teams. Secondly, we consider maximizing the separation in general 2P-DRRTs with minimum breaks by integer programming and constraint programming, respectively. The two approaches of direct formulation and “first-break, then-schedule” decomposition are presented and compared. We obtain the maximum separation for up to 14 teams. Furthermore, we consider the application with place constraints to show the flexibility and efficiency of scheduling 2P-DRRTs with minimum breaks and a positive separation.     

Design and manufacturing of JT-60SA vacuum vessel

JT-60 is planned to be upgraded to JT-60SA tokamak machine with fully superconducting coils, which is a project of the JA-EU satellite tokamak program under both Broader Approach program and Japanese domestic program. The JT-60SA vacuum vessel (VV) has a D-shape poloidal cross section and a toroidal configuration with 10° facet segmented in toroidal direction. The material of the VV is 316L stainless steel with low cobalt content of <0.05 wt%. A double wall structure is adopted for the VV to ensure high rigidity and high toroidal one-turn resistance simultaneously.Fundamental welding R&D and a trial manufacturing of the 20° upper half of the VV have been performed to study the manufacturing procedure. After the confirmation of the quality of the mock-up, manufacturing of the actual VV started in November 2009.