Attentional modulation of the mere exposure effect.

The mere exposure effect refers to the phenomenon where previous exposures to stimuli increase participants’ subsequent affective preference for those stimuli. This study explored the effect of selective attention on the mere exposure effect. The experiments manipulated the to-be-attended drawings in the exposure period (either red or green polygons in Experiments 1 and 2; both red and green polygons in Experiments 3 and 4) and black to-be-evaluated drawings in the affective judgment period (morphologically identical to the red or green polygons in Experiments 1 and 4; morphologically identical to the composite drawings in Experiments 2 and 3). The results showed a significant mere exposure effect only for the target shapes involved in attentional selection, even when the participants could recognize the nontarget shapes. This indicates that selective attention modulated the mere exposure effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Growth of bubbles containing plasma in water by high-frequency irradiation

Plasma was generated in water by irradiation at high frequency of 13.56 MHz, and the behavior of bubbles including the plasma was observed by a high-speed camera. The generation pattern of the bubbles was classified into four types according to liquid temperature and supplied power. Conducting the simulation, the maximum temperature in the bubble was found to be from 3500 K to 4300 K, and the decomposition of water molecule occurred. The gas in the bubble was found to become high ratio of hydrogen. The phenomenon can be regarded as a film boiling of exceptionally high heat flux.     

Self-flux synthesis and photoluminescent properties of LiAl5O8

Pure-phase LiAl₅O₈ was selected as an oxide ceramic red phosphor material without dopants (color centers) and was synthesized using a self-flux method. The LiAl₅O₈ was formed by heating a powder mixture consisting of γ-Al₂O₃:Li₂SO₄ = 1:2 (molar ratio) at over 1100 °C for 1 h. Photoluminescence (PL) properties for the synthesized LiAl₅O₈ were investigated. The maximum intensity of the excitation spectrum for the photoluminescent emission of LiAl₅O₈ synthesized was at 274 nm. The peak intensity of the emission spectrum was at a wavelength of 667 nm (red color). The intensity of the peak emission spectrum increased with the heating temperature, i.e., the maximum peak intensity of the red emission spectrum was detected for the LiAl₅O₈ synthesized by heating at 1500 °C for 1 h.     

Biodesulfurization of dibenzothiophene with Rhodococcus erythropolis ATCC 53968 and its mutant in an interface bioreactor

An interface bioreactor was used in the biodesulfurization (BDS) of dibenzothiophene (DBT) with Rhodococcus erythropolis ATCC 53968. Although this strain could efficiently degrade DBT to 2-hydroxybiphenyl (2-HBP), the microbial film peeled off from the surface of the carrier (agar plate) to an organic phase (dodecane or tetradecane). To overcome this problem, a UV mutant, which strongly adhered to the carrier surface, was obtained by a new screening method. The best UV mutant (UM-021) could efficiently catalyze the BDS and the microbial film did not peel off from the surface of the carrier to tetradecane layer.     

Fan noise reduction of household refrigerator

The authors describe the method of reducing the fan noise, especially the impeller noise, of a household refrigerator. The fan in the refrigerator tested is a propeller fan, and the fan unit consists of an impeller, which has four blades, a rear board, which covers the evaporator, and a front board, which has a number of openings. The flow through the openings freezes food in the freezer. By measuring the internal flow with a laser Doppler velocimeter, it was made clear that the flow through the impeller was not symmetrical to the axis. The unsymmetrical flow seems to be caused by the restrictions of flow passages, and it might produce the impeller noise. The search for the sound source by the sound intensity method indicated that the noise was radiated through the openings of the front board. Guiders were installed on the rear board in the fan unit to guide the flow away from the openings. As a result, the impeller noise was reduced, whereas the flow was kept almost the same     

Improvement of the precision of the gradient method and object tracking using optical flow

In this study, the spatial local optimization method was improved to obtain high precision of optical flow for cases in which the object movement changes substantially and a method to trace the loci of moving objects was considered. In the spatial local optimization method, the precision of the optical flow when the object movement changes substantially becomes a problem. Therefore, to make the object movement relatively small, we obtained flow vectors from the image sequence to drop the resolution of the original input image sequence to half the initial resolution. flow vectors were then obtained from the original input image sequence that were smaller than the threshold value. We show that the precision of the optical flow when the object movement changes substantially is improved by this method. Method used to trace the loci of moving objects was demonstrated. We obtained clusters from histograms of flow vectors and pursued each cluster. We show that it is possible to trace moving objects by this method. This work was presented, in part, at the 7th International Symposium on Artificial Life and Robotics, Oita, Japan, January 16–18, 2002     

THE SEPARATION OF NEPTUNIUM AND TECHNETIUM IN AN ADVANCED PUREX PROCESS

ABSTRACT

An advanced PUREX process has been developed which can reduce TRU waste volume and the environmental hazard risk due to long-lived nuclides. The separation of neptunium and technetium from plutonium and uranium solutions has been studied before the U/ Pu partitioning step in the PUREX process. The effectiveness of normal-butyraldehyde as a reductant of Np( VI) to Np( V) and of high acid scrubbing of technetium was shown in a basic study and a chemical flowsheet study.     

DISTRIBUTION OF N- AND ISO- BUTYRALDEHYDES BETWEEN TRI-N-BUTYL PHOSPHATE/ N-DODECANE AND NITRIC ACID

ABSTRACT

The distribution of n- and iso-butyraldehydes between tri-n-butyl phosphate(TBP) n-dodecane(nDD) and HNO₃ were measured. The distribution ratio of n-butyraldehyde in the TBP/nDD and HNO₃ system was nearly the same as that of iso-butyraldehyde. The distribution ratios of n- and iso-butyraldehydes increased with TBP concentration in the organic phase. The equilibrium constant of the extraction reaction was about 2. In a uranium, neptunium and plutonium separation process, most of the n- and iso-butyra1dehydes fed into theNp separation stepor into thePu/U partition will be left with the TBP solvent. The two compounds will be partly back-extracted to the aqueous phase in the U purification and in the solvent washing steps of the PUREX process.     

Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate

We joined aluminum alloy A5052 to cold-rolled steel SPCC (Steel Plate Cold Commercial) and austenitic stainless steel SUS304 using resistance spot welding with a cover plate. The interfacial microstructure was observed using transmission electron microscopy. A thick two-layered reaction layer contains Fe₂Al₅ and FeAl₃ and a thin serration reaction layer contains Fe₂Al₅ and FeAl₃ were observed at the A5052/SPCC and A5052/SUS304 interface, respectively. Mechanical property analysis suggested that the reaction layer has no effect on the tensile shear strength of the A5052/SUS304 joint and that the tensile shear strength of the A5052/SPCC joint is influenced by the reaction layer formed at its interface.