Therapeutic Strategies for Disseminated Intravascular Coagulation Associated with Aortic Aneurysm

Aortic aneurysms are sometimes associated with enhanced-fibrinolytic-type disseminated intravascular coagulation (DIC). In enhanced-fibrinolytic-type DIC, both coagulation and fibrinolysis are markedly activated. Typical cases show decreased platelet counts and fibrinogen levels, increased concentrations of fibrin/fibrinogen degradation products (FDP) and D-dimer, and increased FDP/D-dimer ratios. Thrombin-antithrombin complex or prothrombin fragment 1 + 2, as markers of coagulation activation, and plasmin-α₂ plasmin inhibitor complex, a marker of fibrinolytic activation, are all markedly increased. Prolongation of prothrombin time (PT) is not so obvious, and the activated partial thromboplastin time (APTT) is rather shortened in some cases. As a result, DIC can be neither diagnosed nor excluded based on PT and APTT alone. Many of the factors involved in coagulation and fibrinolysis activation are serine proteases. Treatment of enhanced-fibrinolytic-type DIC requires consideration of how to control the function of these serine proteases. The cornerstone of DIC treatment is treatment of the underlying pathology. However, in some cases surgery is either not possible or exacerbates the DIC associated with aortic aneurysm. In such cases, pharmacotherapy becomes even more important. Unfractionated heparin, other heparins, synthetic protease inhibitors, recombinant thrombomodulin, and direct oral anticoagulants (DOACs) are agents that inhibit serine proteases, and all are effective against DIC. Inhibition of activated coagulation factors by anticoagulants is key to the treatment of DIC. Among them, DOACs can be taken orally and is useful for outpatient treatment. Combination therapy of heparin and nafamostat allows fine-adjustment of anticoagulant and antifibrinolytic effects. While warfarin is an anticoagulant, this agent is ineffective in the treatment of DIC because it inhibits the production of coagulation factors as substrates without inhibiting activated coagulation factors. In addition, monotherapy using tranexamic acid in cases of enhanced-fibrinolytic-type DIC may induce fatal thrombosis. If tranexamic acid is needed for DIC, combination with anticoagulant therapy is of critical importance.     

Improvement of carrier diffusion length in silicon nanowire arrays using atomic layer deposition

To achieve a high-efficiency silicon nanowire (SiNW) solar cell, surface passivation technique is very important because a SiNW array has a large surface area. We successfully prepared by atomic layer deposition (ALD) high-quality aluminum oxide (Al₂O₃) film for passivation on the whole surface of the SiNW arrays. The minority carrier lifetime of the Al₂O₃-depositedSiNW arrays with bulk silicon substrate was improved to 27 μs at the optimum annealing condition. To remove the effect of bulk silicon, the effective diffusion length of minority carriers in the SiNW array was estimated by simple equations and a device simulator. As a result, it was revealed that the effective diffusion length in the SiNW arrays increased from 3.25 to 13.5 μm by depositing Al₂O₃ and post-annealing at 400°C. This improvement of the diffusion length is very important for application to solar cells, and Al₂O₃ deposited by ALD is a promising passivation material for a structure with high aspect ratio such as SiNW arrays.     

Optical assessment of silicon nanowire arrays fabricated by metal-assisted chemical etching

Silicon nanowire (SiNW) arrays were prepared on silicon substrates by metal-assisted chemical etching and peeled from the substrates, and their optical properties were measured. The absorption coefficient of the SiNW arrays was higher than that for the bulk silicon over the entire region. The absorption coefficient of a SiNW array composed of 10-μm-long nanowires was much higher than the theoretical absorptance of a 10-μm-thick flat Si wafer, suggesting that SiNW arrays exhibit strong optical confinement. To reveal the reason for this strong optical confinement demonstrated by SiNW arrays, angular distribution functions of their transmittance were experimentally determined. The results suggest that Mie-related scattering plays a significant role in the strong optical confinement of SiNW arrays.     

Cloning, sequencing and expression of an alpha-L-arabinofuranosidase from Aspergillus sojae

The arabinofuranosidase gene was cloned from the cDNA of Aspergillus sojae. It was found to contain an open reading frame composed of 984 base pairs (bp) and to encode 328 amino acid residues (aa). The cDNA sequence suggested that the mature enzyme is preceded by a 26-aa signal sequence and the molecular mass was predicted to be 32,749 Da. The A. sojae arabinofuranosidase consists of a single catalytic domain; it does not have a specific substrate-binding domain such as the xylan-binding domain reported in an arabinofuranosidase from Streptomyces lividans (Vincent, P. et al.: Biochem. J., 322, 845-852, 1997). The deduced amino acid sequence of the catalytic domain of the mature enzyme exhibits extensive identity with the catalytic domains of Streptomyces coelicolor (74%), Aspergillus niger (75%), S. lividans (74%), and Aspergillus tubingensis (75%), which are enzymes that belong to family 62 of the glycosyl hydrolases. The cloned AFdase gene was expressed in Escherichia coli BL21 (DE3) pLysS as a cellulose-binding domain tag fusion protein. The specific activity of the purified recombinant enzyme was 18.6 units/mg protein, which is one-fourth that of the enzyme purified from a solid-state culture of A. sojae.     

Photoluminescence Analysis of Iron Contamination Effect in Multicrystalline Silicon Wafers for Solar Cells

We investigated the effect of Fe contamination on the electronic properties of dislocation clusters in relation to oxygen precipitation in multicrystalline silicon (mc-Si). Photoluminescence (PL) spectroscopy and mapping were performed at room and liquid-He temperatures on mc-Si wafers before and after Fe contamination. PL spectra consisted of the band-edge emission, the 0.78-eV emission associated with oxygen precipitates, and the dislocation-related D-lines. The Fe contamination increased the electrically active dislocation clusters. Part of these clusters acted as preferential oxygen precipitation sites, and their electronic properties were not further influenced by the Fe contamination.     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

Moving pick‐up‐type contactless power transfer systems and their efficiency using series and parallel resonant capacitors

The equivalent circuit, the efficiency, and the important characteristics of moving pick‐up type contactless power transfer systems are described. If the primary series capacitor and the secondary parallel capacitors are chosen correctly and the winding resistances are ignored, the equivalent circuit of the transformer with these capacitors becomes the same as an ideal transformer at the resonant frequency. This simple approximation helps to understand the phenomena occurring with load changes. Because the circuit analysis becomes simple, the approximate value of the power transfer efficiency can be derived. This paper describes the determination of the capacitor values, the derivation of the equivalent circuit and the efficiency, and test results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(2): 47–54, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20970     

Suppression of creep cavitation in precipitation-hardened austenitic stainless steel to enhance creep rupture strength

Extensive creep cavitation in Ti, Nb and Cu containing precipitation hardened austenitic steels was found to limit the usefulness of deformation resistance to increase long-term creep rupture strength. The steels were microalloyed with boron and cerium that resulted in increase in creep rupture strength and ductility of the steels significantly. Grain boundary sliding and creep cavity nucleation and growth in the steels were suppressed greatly on microalloying. Auger spectroscopic analysis revealed the segregation of boron instead of sulfur on cavity surface and the absence of sulfur contamination of grain boundary upon the microalloying. Suppression of creep cavitation through the control of trace elements segregation along with the precipitation hardening increased the creep rupture strength of austenitic stainless steels.     

Molecular structures of gellan gum imaged with atomic force microscopy (AFM) in relation to the rheological behavior in aqueous systems in the presence of sodium chloride

Aqueous solutions of gellan gum with comparable molecular mass but with different acyl contents were investigated by atomic force microscopy and rheological measurements in the presence of sodium chloride (NaCl). Results obtained were discussed in relation to our previous report using potassium chloride (KCl) as an added salt. For a low-acyl sample, continuous fibrous network structures were identified microscopically as in the case of KCl. The network structures were more heterogeneous than those formed with KCl in terms of the height distribution of molecular assemblies. Rheological thermal hysteresis between sol–gel transitions was detected as in the case of KCl. The storage modulus (G′) of the gelled system was ca. 15% of the corresponding data with KCl at 20 °C. For a high-acyl sample, no continuous network structures were identified but branches with observable ends were identified as in the case of KCl. The hysteresis was less evident than the corresponding data with KCl and for the low-acyl sample with NaCl. Also, G′ values at 20 °C were ca. 30% and 20% of the corresponding data with KCl and for the low-acyl sample with NaCl, respectively. Continuousness and homogeneity of network structures related to the hysteresis and elasticity of the system, respectively.     

Hydrogenation and dehydrogenation processes of palladium thin films measured in situ by spectroscopic ellipsometry

The hydrogenation and dehydrogenation switching processes of Pd thin films were analyzed by measuring in situ in real time the variation in ellipsometric Ψ and Δ during hydrogenation and dehydrogenation using spectroscopic ellipsometry. The hydrogenation proceeded from the film surface and a mixture layer of metal and hydride was formed at the surface. With time elapse, the thickness of the mixture layer increased rapidly. After the whole Pd metal layer transformed to the mixture layer, the concentration of hydride in the mixture layer increased. Finally, the concentration reached 1; the whole Pd in the mixture layer was hydrogenated, and the hydrogenation of Pd was complete. On the other hand, the dehydrogenation proceeded in a way completely opposite to the hydrogenation process; the concentration of hydride in the mixture layer decreased, Pd metal layer was formed at the interface between the film and the substrate, and the whole layer returned to Pd metal. The dehydrogenation proceeds much faster than hydrogenation.