Vibration Monitoring and Diagnosis of Pipe-line Pumps on Offshore Platforms

ＶｉｂｒａｔｉｏｎＭｏｎｉｔｏｒｉｎｇａｎｄＤｉａｇｎｏｓｉｓｏｆＰｉｐｅｌｉｎｅＰｕｍｐｓｏｎＯｆｓｈｏｒｅＰｌａｔｆｏｒｍｓＺｈｅｎｇＷｅｎＴｅｃｈｎｏｌｏｇｉｃａｌＦａｃｕｌｔｙｏｆＭａｉｎｔｅｎａｎｃｅＥｎｇｉｎｅｒｉｎｇＧｕａｎｇｚｈｏｕ...     

反向回转双激振器振动机控制同步的理论研究

本文对两激振器作反向回转的振动机控制同步进行了理论研究和计算机仿真。推导出了考虑质心偏移时两主轴的转矩差方程，在此基础上建立了控制系统的数学模型，设计了具有鲁棒性的非线性变结构滑模控制器．仿真结果表明，控制同步不仅可以消除由质心偏移、电机特性差等原因引起的稳态相位差，同时还能大大降低瞬态相位差，从而使机体的振动方向保持不变，减小起、制动过程中机体的摇摆振动．     

填料萃取塔液泛速度的计算

介绍了三种有代表性的填料萃取塔的液泛速度计算公式，并通过它们用于三种典型的液-液实验体系和两种不同填料的计算结果的比较，对这些公式的适用范围进行了讨论。     

LaCrMnNiO系热敏陶瓷的微观结构控制

通过对不同配方、工艺下的ＬａＣｒＭｎＮｉＯ系热敏陶瓷的微观结构研究，指出材料的相组成对其宏观电性能的影响，并提出了通过复合工艺利用“过渡相”的形成，对材料的“最终相”加以控制的方法。文中列出了使用ＸＲＤ及ＸＰＳ手段对材料微观结构的分析结果及有关电性能的测试数据。     

智能压力传感器

讨论了压阻式智能传感器的设计,并以80C31单片机为核心构成了一个能检测压力、温度的智能传感器,它能实现量程的自动变换、故障的自诊断及数据的处理,通过软件实现了对半导体传感器的零点修正、非线性修正及温度补偿。实验表明,传感器的智能化改善了传感器的性能。     

石油钻机提升系统穿绳方法研究

目前国内外钻机大绳一般采用顺穿法或花穿法。分析了2种穿绳方法的受力特点,大绳顺穿时游车的受力不平衡,会发生倾斜和摆动;采用大绳花穿方法,避免了游车的倾斜和摆动,但造成大绳入轮槽的倾角大,大绳易脱槽。顺穿法一般在电动钻机上采用,主要考虑到电控操作提升系统比较平稳;花穿法一般在机械钻机上使用,以受力平衡来缓解气控操作带来的冲击载荷的影响。为了克服这2种穿绳方法的不足,提出了两行双联滑轮组顺穿法和双联滑轮组顺穿法,可以提高安全性,减少磨损。     

EMMP: a highly efficient membership management protocol

Gossip (or epidemic) algorithms have recently become popular solutions to multicast message dissemination in peer-to-peer systems. Nevertheless, it is not straightforward to apply gossip to on-demand streaming because it often fails to achieve a timely delivery. To solve this problem and taking into account the characteristic of peers randomly joining and leaving in peer-to-peer systems, an Efficient Membership Management Protocol (EMMP) has been presented. Every node only needs to keep contact with O (log(N)) nodes, and EMMP can support the reliable dissemination of messages. Considering the “distance” between peers, it causes the major data to be transmitted in a local area and reduces the backbone’s traffic, and speeds up the dissemination of messages between peers. This paper has adopted the “goodfriend” mechanism to reduce the influence on the system when a peer fails or leaves. Simulation results show that EMMP is highly efficient, and both the redundancy and the delay of the system are well solved.     

Separating inviscid flows

Summary The separating flow of an inviscid fluid is not only a limit solution of the steady separating, laminar fluid flow at high values of the Reynolds number but it is also part of its structure (Smith [1], [2]). This work aims at reexamining the separating flow of inviscid fluid past a bluff body which is fixed in an otherwise uniform stream of fluid. For the purpose of this paper we will assume that the bluff body is a circular cylinder but the theory is applicable to bodies of any shape. It is further assumed that the fluid is in steady two-dimensional motion and is inviscid and of constant density. The flow structure is assumed to consist of a separated flow region, caviting flows in which there exists a free surface on which the pressure is constant, and a wake. A twin spiral vortex model is used in order to determine the shape of the free streamline. Based on the free streamline theory the problem reduces to solving a mixed boundary value problem and a Hilbert solution for the inverse problem in the auxiliary plane is obtained. When we consider the flow in the physical plane the problem is transformed into a direct problem in which the geometry of the solid body is given in advance. We assume that the separation is smooth and thus the curvature of the free streamline at the point of free detachment be equal to that of the body surface. A numerical method for solving the two-dimensional potential flows past arbitrarily shaped curved bluff bodies is developed.When the cavitation number is zero the angle of separation is approximately 55° and the computed results predict that the position of the separation point will move backward as the cavition number increases. The relationships between the drag coefficient, and the width and length of the cavity is determined and is found to be in very good agreement with the predictions of Smith [1].     

A Novel Athermal 40-Channel DWDM Multi/Demultiplexer Based on the Combination of AWGs and Interleaver

An athermal 40-channel dense wavelength-division-multiplexing multi/demultiplexer using a novel combination technology is proposed. It consists of one 1times4 100- to 400-GHz spacing interleaver filter and four sub-arrayed-waveguide gratings (AWGs). The temperature-dependent wavelength shift of the combined device is successfully suppressed to 0.058 nm in the -20degC to 70degC temperature range. Moreover, the combined device's adjacent crosstalk (typically -35 dB) is much better than conventional AWGs (typically -25 dB).