Comparison of Centralized and Decentralized Systems in Power System Restoration

This paper proposes a multiagent approach to decentralized power system restoration for distribution system networks and presents a comparison of centralized and decentralized systems for power system restoration. Numerous studies have been conducted on power system restoration problems. From the viewpoint of system structures, this research can be divided into two categories: centralized systems and decentralized systems. In this study, we solve a power system restoration problem for a power distribution network by two different methods: mathematical programming (MIP) and the proposed multiagent‐based method (MAS). The proposed multiagent system consists of several distributing substation agents (DSAGs) and load agents (LAGs). An LAG corresponds to the customer load, and a DSAG supplies electricity to the LAG. From the simulation results, it can be seen that the proposed system can reach the right solution by making use of only local information and that the solution quality is better than that of the centralized system (MIP). This means that the proposed multiagent restoration system is a promising approach to larger scale distribution networks.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Network copolyesters from benzenepolycarboxylic acids and 1,6-hexanediol

Network copolyesters were prepared from trimesic (Y), pyromellitic (X) or mellitic (Y_H) acids and 1,6-hexanediol (6G). Prepolymers prepared by meltpolycondensation were cast from dimethylformamide solution and postpolymerized at 260°C for 6h to form a network. The resultant films were transparent, flexible and insoluble in any organic solvents. Degree of reaction estimated from the infrared absorbance of ester and methylene groups was almost the same for all films, 94–96%. X-ray diffraction intensity curves and densities showed that the ordering of networks was decreased by the copolymerization, which was remarkable for 6G–X/Y_H copolymer films and was consistent with the higher decreases of heat-distortion temperature for these copolymer films. The copolymerization also caused decrease of thermal stability, tensile properties and alkali resistance and increase of dye absorption.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Effect of blending on liquefaction of coals

After solvent extraction of Taiheiyo, Miike and Balmer coals using wash oil under nitrogen atmosphere at 370 °C for 30 min, the extraction yield is always within the additivity law. Further studies used Yallourn, Soyakoishi, Taiheiyo, Horonai, Miike, Shin Yubari, Balmer coals and their blends which were hydrogenated in tetralin, wash oil or creosote oil, with or without catalyst, at 400–450 °C under 10 or 3 MPa of initial hydrogen pressure. When hydrogen is available, the additivity law exists for blended coals, but when the hydrogen supply is deficient, the experimental conversion of blended coals is always lower than calculated conversions. This may be due to the faster consumption of the hydrogen by more reactive coals and thus the less reactive coals were unable to react with hydrogen.     

Fluorometric detection of interaction between lipase and glyceride

Previously, we devised the efficient modification of lipase, which can be dissolved and still maintain its activity in organic solvents. In this work, the fluorescence of the modified lipase could be detected in chloroform. When glycerides were added to the modified lipase solution, the intrinsic tryptophan fluorescence of the modified lipase decreased, which suggests that the environment of the tryptophan residue was affected by the substrate. The interaction between the modified lipase and glyceride was studied kinetically in terms of fluorescence intensity of the tryptophan residue. Because glyceride is not subject to hydrolysis in nonaqueous solution, the dissociation constant of the enzyme-substrate complex could be determined. Thus, insight into the direct interaction between enzyme and substrate provided some structural information regarding the active site of lipase.     

A new maritime lifesaving multiple-effect solar still design

This paper presents a new maritime lifesaving multiple-effect solar still design where several extended wicks feed seawater to their evaporating areas by capillary force, and the resulting water vapor diffuses and condenses on facing wicks with the condensate flowing through the wicks into storage bags. A theoretical analysis showed that a temperature drop through diffusion layers between evaporating and condensing wicks slowly increases in the main evaporating areas and rapidly near salt depositions whereas the evaporation rate decreases slowly in the main area and rapidly near salt depositions. These changes are caused by increases in salt concentrations and resulting boiling point elevation. With steady-state transfer analysis, the proposed still is predicted to produce about 15 kg m ⁻²d⁻¹ fresh water on a sunny day of 22 MJm⁻²d⁻¹ solar radiation, showing a potential to be a maritime lifesaving desalinator.     

Synthesis, spark plasma sintering and electrical conduction mechanism in BaTiO3-Cu composites

BaTiO₃-Cu composite powders were prepared via an alkoxide-mediated synthesis approach. As-synthesized BaTiO₃ nanoparticles were as small as 40 nm and coated partially larger Cu particles of approximately 1 μm in size. Thermogravimetric analysis (TGA) and dilatometry revealed a gradual increase in weight loss and retarded shrinkage with the increase of Cu addition. BaTiO₃-Cu composites were successfully densified by spark plasma sintering (SPS). The microstructures show an average grain-size for BaTiO₃ of around 100 nm and a crystallite size of about 1 μm for the Cu inclusions. The AC conductivity of the BaTiO₃-Cu composites increased with increasing Cu content or with temperature. The dominant electrical conduction mechanism in SPSed BaTiO₃-Cu composites changed from migration of oxygen vacancies to band conduction of trapped electrons in oxygen vacancies with the increase of Cu content.     

Dietary Guar Gum Reduces Lymph Flow and Diminishes Lipid Transport in Thoracic Duct-Cannulated Rats

Guar gum has a well-recognized hypolipidemic effect. This effect is thought to be due to the physicochemical properties of guar gum, which may cause changes in adsorption of lipids or the viscosity of the intestinal contents. Guar gum is a non-specific absorption inhibitor of any type of lipid-soluble compound. Permanent lymph duct cannulation was performed on rats to investigate the effects of dietary guar gum on lymph flow and lipid transport. Rats fed a 5% guar gum diet were compared with those fed a 5% cellulose diet, and lymph was collected after feeding. The water-holding capacity (WHC), settling volume in water (SV), and viscosity of guar gum were compared with those of cellulose. Rats fed with the guar gum diet had significantly lower lymph flow and lymphatic lipid transport than did rats fed with the cellulose diet. The WHC, SV, and viscosity of guar gum were significantly higher than those of cellulose. We propose that dietary guar gum reduces lymph flow and thereby diminishes lipid transport by means of its physicochemical properties related to water behavior in the intestine.