He+ ion energy loss parameter in thin films of UO2

The stopping cross sections of He⁺ ions in vacuum evaporated films of UO₂ have been measured at incident energies from 0.3 to 2.0 MeV. A procedure has been described for obtaining true stopping cross sections by using thin films having various thicknesses. The energy loss parameter of He⁺ ions was determined using slopes at the origin in relative energy loss vs. thickness curves.     

Dynamic Performance Analysis of Self-Controlled Synchronous Motor Speed Control Systems

The dynamic performance of speed control systems containing a self-controlled synchronous motor is analyzed in detail considering two practical types of position sensor used in this motor. The dynamic responses of a basic speed control system with a speed feedback loop are first analyzed for the case when the speed reference signal is stepped up. It is shown that the system is apt to become unstable when an armature voltage sensing type position sensor is used. Then it is clarified that this drawback is improved greatly by introducing a current feedback loop in the system. Finally the dynamic responses of a speed control system with a margin angle control loop are analyzed, and a method of securing safe commutation of the inverter during transients is proposed.     

Transport of carnitine and acetylcarnitine by carnitine/organic cation transporter (OCTN) 2 and OCTN3 into epididymal spermatozoa

Carnitine and acetylcarnitine are important for the acquisition of motility and maturation of spermatozoa in the epididymis. In this study, we examined the involvement of carnitine/organic cation transporter (OCTN) in carnitine and acetylcarnitine transport in epididymal spermatozoa of mice. Uptake of both compounds by epididymal spermatozoa was time-dependent and partially Na(+)-dependent. Kinetic analyses revealed the presence of a high-affinity transport system in the spermatozoa, with K(m) values of 23.6 and 6.57 muM for carnitine and acetylcarnitine respectively in the presence of Na(+). Expression of OCTN2 and OCTN3 in epididymal spermatozoa was confirmed by immunofluorescence analysis. The involvement of these two transporters in carnitine and acetylcarnitine transport was supported by a selective inhibition study. We conclude that both Na(+)-dependent and -independent carnitine transporters, OCTN2 and OCTN3, mediate the supply of carnitine and acetylcarnitine to epididymal spermatozoa in mice.     

Evaluation of geometric efficiency and radiation exposure in z-axis for volume scan

The International Electrotechnical Commission (IEC) recommended that a display be provided on the operating console of medical computed tomography (CT) scanners when the geometric efficiency (GE) in the z-axis is 70% or less. Taking into account the increase in the number of detector rows and the changes in the scanning method, the present study was conducted to review the GE and to evaluate the exposure dose in the z-axis direction. The GE for a single-rotation scan was calculated in accordance with IEC-606024 Ed. 2. The findings of the present study suggest that 320-row area detector computed tomography volume scan (single axial scan with no table movement in which it just happened to use a very large beam width) extends 18.8 mm beyond the nominal beam collimation, even when the GE is >70%. However, compared with the helical scan, which is the present mainstream of CT examinations, the dose beyond the scan length is narrower in volume scan for a limited scan length of 160 mm or less.     

Prediction of vortex penetration depth at thermal stratification by cavity flow in a branch pipe with closed end (effect of heat radiation condition on temperature fluctuations)

In a branch pipe with one closed end, the cavity flow penetrates into the branch pipe from the main loop and a thermal boundary layer occurs because the cavity flow is a hot fluid, but heat removal causes a colder fluid in the branch pipe. This thermal stratification may affect the structural integrity. Therefore, a pipe design standard to suppress thermal fatigue should be established. The pipe design standard consists of the maximum penetration depth L_sv and the minimum penetration depth L_sh. In order to establish an evaluation method for L_sh, a visualization test and a temperature fluctuation test were carried out. A theoretical formula for thermal stratification was introduced from the heat balance model. Then the model was used to obtain an empirical equation from the map of fluid temperature fluctuation. This method can predict the vortex penetration depth by cavity flow in horizontal branch pipes. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(1):38–55, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20135     

Percolation theory for flame propagation in non- or less-volatile fuel spray: A conceptual analysis to group combustion excitation mechanism

A percolation theory for flame propagation in non- or less-volatile fuel spray is developed based on a cubic lattice model representing a local spray state. The interdroplet flame propagation characteristics found from microgravity experiments on flame spread along a linear droplet array are applicable to describing interdroplet flame propagation between neighboring droplets in any distribution of droplets because the effect of heat conduction from the flame front is shielded by the nearest unburned droplet, which acts as a heat sink. Thus, once the method by which the unburned droplet nearest to the flame front is ignited is identified and formulated into a simple algorithm rule, we can examine by computer simulation the statistical flame propagation behavior in a non- or less-volatile fuel spray in the framework of the percolation theory. In non- or less-volatile fuel, an unburned droplet swallowed by an envelope diffusion flame of other droplets is heated and becomes a new supplier of fuel vapor to the flame front, allowing the flame front to advance. For randomly distributed droplets, the flame front selects the path that minimizes its propagation time. These two phenomena occur when the grid spacing of the cubic lattice model is equal to the maximum flame radius of an isolated droplet immersed in the same air conditions as the local spray state. Furthermore, physical considerations reveal that the lattice size that leads to statistically meaningful information can be rather small, i.e., 20×20×20 vertices. Therefore, the proposed percolation theory is tractable and useful in finding the probability that a flame front propagates across a spray element and for exploring the mechanism of the excitation of group combustion for non- or less-volatile fuel sprays.     

Carbon black / PTFE composite hydrophobic gas diffusion layers for a water-absorbing porous electrolyte electrolysis cell

The characteristics of a water-absorbing porous electrolyte electrolysis cell, in which pressurized water is injected directly into the electrolyte layer, are investigated. High water support force is required for the gas diffusion layer (GDL) in this novel cell design, and therefore here we report a new type of hydrophobic GDL comprising an acetylene black (AB) and poly(tetrafluoroethylene) (PTFE) composite film. The method of preparation of the AB/PTFE slurry, film formation methods, and the AB/PTFE weight ratio were investigated and optimized. The ball-milling and transfer method were suitable for preparing uniform AB/PTFE slurry and successfully covering AB/PTFE film without any cracks on micro-porous layer coated carbon paper, respectively. An investigation about different PTFE weight ratios against AB from 0.1 to 6 showed a serious trade-off character between electrical resistance R, gas permeability V′, and water support force P_lim. The 1/2.5 of AB/PTFE weight ratio was most optimal, which showed to have most equivalent R (2.5 Ω cm^?2), V′(136 mL atm^?1 cm^?2 min^?1), and P_lim (0.25 MPa). We also confirmed that fabricated GDL with optimal condition was worked as the blocking layer against water injected through electrolyte layer and pressurized by nitrogen gas, and as gas-permeation layer for generated hydrogen gas in water electrolysis test.     

Feature extraction of protein expression levels based on classification of functional foods with SOM

We investigated the relations between the physiological activities and protein expression levels of functional foods using a self-organizing map (SOM). The input vectors to the SOM were the protein expression levels and the physiological activity. A competitive node has two kinds of weights: one is for protein expression levels, and the other is for physiological activity. A winner node is decided by the distance between the values of protein expression levels described in the input vector and the corresponding weights only. Then all weights, including those for physiological activity in each node, are updated. Therefore each node has an artificially generated value of physiological activity. Finally, the nodes can be categorized by the abovementioned physiological activity. A well-trained SOM gives us information about the relations between physiological activities and protein expression levels. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008